FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Mountaineer Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2009 Mercury Mountaineer Rotor, Rear Part Number: 6L2Z-2C026-B
$82.86 MSRP: $124.98You Save: $42.12 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 6L2Z-2C026-C
- Base No.: 2C026
- Item Weight: 15.50 Pounds
- Item Dimensions: 3.3 x 13.0 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Rotor, Front Part Number: 6U2Z-1V125-CB
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-CC
- Base No.: 1125
- Item Weight: 23.00 Pounds
- Item Dimensions: 3.2 x 13.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mountaineer Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mountaineer Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Mountaineer Brake Disc Parts Q&A
- Q: How to Remove and Replace the Brake Disc on 2009 Mercury Mountaineer?A: Before beginning brake rotor/disc replacement ensure that the brake caliper along with brake pads and anchor plate assembly remain detached from their positions on the brake hose to avoid damages to both components. Legitimately detach the two brake caliper anchor plate bolts before placing the assembly on mechanic's wire support. Use the rust penetrant on the friction surfaces between the brake disc and hub to make disc removal easier. The specified parts cleaner must be utilized to eliminate all rust and foreign materials from both brake wheel hub and attached brake disc before installation. Before installing the new brake disc apply a thin layer of anti-seize lubricant on the hub flange according to manufacturer specification. The final step includes repositioning the brake caliper and brake pads together with the anchor plate before installing and tightening the two brake caliper anchor plate bolts to 165 Nm (122 lb-ft).