FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Mountaineer Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2008 Mercury Mountaineer Rotor, Rear Part Number: 6L2Z-2C026-B
$82.86 MSRP: $124.98You Save: $42.12 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 6L2Z-2C026-C
- Base No.: 2C026
- Item Weight: 15.50 Pounds
- Item Dimensions: 3.3 x 13.0 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Rotor, Front Part Number: 6U2Z-1V125-CB
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-CC
- Base No.: 1125
- Item Weight: 23.00 Pounds
- Item Dimensions: 3.2 x 13.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Mountaineer Brake Disc Parts Q&A
- Q: How to Remove and Replace the Front Brake Disc on 2008 Mercury Mountaineer?A: The removal of the front brake rotor/disc starts with ensuring that the brake caliper and brake pads and anchor plate assembly remain off the brake hose to avoid damage. Use mechanic's wire to support the anchor plate assembly while removing its two bolts and keeping the set aside. The installation of rust penetrant will make it easier to remove a stubborn brake disc through application to the contact points between the brake disc and hub. Use parts cleaner to clean the disc as well as hub until they are free of rust and debris after taking out the disc. Before fitting the new brake disc apply a marginal amount of anti-seize lubricant onto the hub flange surface. Reposition the brake caliper assembly after installing it by securing the two brake caliper anchor plate bolts with a torque of 165 Nm (122 lb-ft).