How Should You Safely Handle and Deploy a Seat Belt Pretensioner on Ford Crown Victoria?

One must wear safety glasses for protection during safety belt pretensioner servicing since the device contains pyrotechnic materials. When handling safety belt pretensioners keep clothing and fingers away from moving components because the risk of injury becomes higher. The remote deployment must happen outside with personnel standing more than 6.1 meters (20 feet) away from each other and workers need hearing protection to protect against noise when the device reports. You should start the process by taking the safety belt retractor/pretensioner assembly off the vehicle and cutting its electrical connector before stripping the wires down to 1 inch of insulation. Two wires with 20 gauge and 6.1 meters (20 feet) minimum length should be used to connect one end to safety belt pretensioner wires. The assembly needs placement on a level surface in an exposed area where movable components remain separated from touchable surfaces. Also keep a 6.1-meter distance (20 feet) between the equipment and other objects. Press the safety belt pretensioner through battery connections at its other wire ends. The safety belt retractor/pretensioner assembly requires ten minutes of cooldown time before maintenance approaches and must be scrapped based on regular scrapping protocols.

How to service the front seat belt on Ford Crown Victoria?

Service of the front seat belt begins with moving the driver seat toward the front position while you remove the two front seat rear track covers. Start by removing the nuts followed by positioning the driver seat at an angle to pull off the center passenger safety belt buckle from the stud before removing the buckle. To install the buckle anchor lower the seat forward a second time while guiding the buckle anchor through the seat track slot until it results on the stud before placing the seat on the rear track studs. Install the front seat rear track covers before checking the safety function of the active restraint system while confirming proper operation.

OEM Ford Crown Victoria Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

98 Seat Belts found

View related parts
Ford Crown Victoria Buckle End, Front Part Number: 1W7Z-5461202-AAB
$168.50 MSRP: $245.27
You Save: $76.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Receptacle, Front; Latch
- Position: Front
- Replaces: 1W7Z-5461202-AAC, 1W7Z-5461202-AAA, 1W7Z-5461202-AAD, 1W7Z-5461202-AAE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Rear Part Number: 1W7Z-5460044-AAJ
$22.88 MSRP: $31.66
You Save: $8.78 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Receptacle, Rear; Latch
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Center Seat Belt Part Number: F5AZ-54611B60-E
$142.63 MSRP: $194.09
You Save: $51.46 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt And Buckle Assembly
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000, 1995-1996 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Rear Passenger Side Part Number: 9W7Z-54611B68-AA
$50.95 MSRP: $70.48
You Save: $19.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right; Retractor
- Manufacturer Note: (-L*)
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Center Seat Belt, Rear Part Number: 9W7Z-54600A38-AA
$90.39 MSRP: $125.04
You Save: $34.65 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Lap and Shoulder Belt, Rear Center
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Rear Part Number: 9W7Z-5460044-AA
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Receptacle, Rear; Latch
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Camel, Rear Part Number: 9W7Z-5460044-AB
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Receptacle, Rear; Latch
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Black/Charcoal, Rear Part Number: 9W7Z-5460044-AC
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Receptacle, Rear; Latch
- Manufacturer Note: (-N*)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Camel, Rear Passenger Side Part Number: 6W7Z-54611B68-CB
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right; Retractor
- Position: Rear Passenger Side
- Replaces: 6W7Z-54611B68-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Center Seat Belt, Black/Charcoal, Rear Part Number: 9W7Z-54600A38-AC
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Lap and Shoulder Belt, Rear Center
- Manufacturer Note: (-N*)
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Front Driver Side Part Number: 9W7Z-54611B09-AA
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Camel, Front Driver Side Part Number: 9W7Z-54611B09-AB
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Prairie Tan/Slate Blue, Front Driver Side Part Number: F5AZ-5461203-E
Product Specifications
- Other Name: Seat Belt Assembly; Latch
- Position: Front Driver Side
- Replaces: F5AZ-5461203-D, F6AZ-5461203-A, YW7Z-5461203-AAA, F8AZ-5461203-AAB, F5AZ-5461203-B, F7AZ-5461203-AAA, XW7Z-5461203-AAA, F5AZ-5461203-C, XW7Z-5461203-AAB, F7AZ-5461203-AAB, F8AZ-5461203-AAA, F5AZ-5461203-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Black/Charcoal, Front Driver Side Part Number: BW7Z-5461200-BC
Product Specifications
- Other Name: Kit - Seat Belt; Seat Belt Lap and Shoulder Belt, Front Left; Seat Belt Receptacle, Front Left; Retractor Assembly; Buckle End; Latch
- Position: Front Driver Side
- Replaces: 6W1Z-5461203-BE, 6W1Z-54611B09-AG, 6W7Z-5461203-AB, 7W1Z-5461203-BD, 5W7Z-5461203-AAB, 5W1Z-5461203-BD, 5W1Z-5461203-AAC, 6W1Z-54611B09-AH, 6W1Z-54611B09-AAD, 5W1Z-54611B09-AAC, 5W7Z-54611B09-AAB, 6W7Z-54611B09-AF, 6W7Z-54611B09-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Black/Charcoal, Front Driver Side Part Number: 9W7Z-54611B09-AC
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Front Left; Retractor Assembly
- Manufacturer Note: (-N*)
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Slate Blue, Driver Side Part Number: YW7Z-54611B69-AAE
Product Specifications
- Other Name: Seat Belt Assembly; Retractor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Center Seat Belt, Camel, Rear Part Number: 9W7Z-54600A38-AB
Product Specifications
- Other Name: Belt And Buckle Assembly; Seat Belt Lap and Shoulder Belt, Rear Center
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Slate Blue, Driver Side Part Number: YW7Z-5460045-AAB
Product Specifications
- Other Name: Seat Belt Assembly; Latch
- Manufacturer Note: L.H., (,2*),Medium Graphite
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Lap & Shoulder Belt, Camel, Rear Passenger Side Part Number: 9W7Z-54611B68-AB
Product Specifications
- Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right; Retractor
- Manufacturer Note: (-J*)
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Buckle End, Prairie Tan/Slate Blue, Front Passenger Side Part Number: F5AZ-5461202-E
Product Specifications
- Other Name: Seat Belt Assembly; Latch
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

| Page 1 of 5 |Next >

1-20 of 98 Results

Ford Crown Victoria Seat Belt

OEM Seat Belt boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Belt with long life and a perfect fit. Come to our website and find genuine Ford Crown Victoria parts. We keep a wide inventory of OEM Crown Victoria parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Crown Victoria Seat Belt Parts and Q&A

Buckle End, Front
2W7Z-5461202-AAA
Q: How Should You Safely Handle and Deploy a Seat Belt Pretensioner on Ford Crown Victoria?
A:
One must wear safety glasses for protection during safety belt pretensioner servicing since the device contains pyrotechnic materials. When handling safety belt pretensioners keep clothing and fingers away from moving components because the risk of injury becomes higher. The remote deployment must happen outside with personnel standing more than 6.1 meters (20 feet) away from each other and workers need hearing protection to protect against noise when the device reports. You should start the process by taking the safety belt retractor/pretensioner assembly off the vehicle and cutting its electrical connector before stripping the wires down to 1 inch of insulation. Two wires with 20 gauge and 6.1 meters (20 feet) minimum length should be used to connect one end to safety belt pretensioner wires. The assembly needs placement on a level surface in an exposed area where movable components remain separated from touchable surfaces. Also keep a 6.1-meter distance (20 feet) between the equipment and other objects. Press the safety belt pretensioner through battery connections at its other wire ends. The safety belt retractor/pretensioner assembly requires ten minutes of cooldown time before maintenance approaches and must be scrapped based on regular scrapping protocols.
Buckle End, Front
1W7Z-5461202-AAB
Q: How to service the front seat belt on Ford Crown Victoria?
A:
Service of the front seat belt begins with moving the driver seat toward the front position while you remove the two front seat rear track covers. Start by removing the nuts followed by positioning the driver seat at an angle to pull off the center passenger safety belt buckle from the stud before removing the buckle. To install the buckle anchor lower the seat forward a second time while guiding the buckle anchor through the seat track slot until it results on the stud before placing the seat on the rear track studs. Install the front seat rear track covers before checking the safety function of the active restraint system while confirming proper operation.

Related Ford Crown Victoria Parts

Browse Ford Crown Victoria Seat Belt by Years

2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992

OEM Ford Crown Victoria Seat Belt

98 Seat Belts found

Ford Crown Victoria Buckle End, Front Part Number: 1W7Z-5461202-AAB

Ford Crown Victoria Buckle End, Rear Part Number: 1W7Z-5460044-AAJ

Ford Crown Victoria Center Seat Belt Part Number: F5AZ-54611B60-E

Ford Crown Victoria Lap & Shoulder Belt, Rear Passenger Side Part Number: 9W7Z-54611B68-AA

Ford Crown Victoria Center Seat Belt, Rear Part Number: 9W7Z-54600A38-AA

Ford Crown Victoria Buckle End, Rear Part Number: 9W7Z-5460044-AA

Ford Crown Victoria Buckle End, Camel, Rear Part Number: 9W7Z-5460044-AB

Ford Crown Victoria Buckle End, Black/Charcoal, Rear Part Number: 9W7Z-5460044-AC

Ford Crown Victoria Lap & Shoulder Belt, Camel, Rear Passenger Side Part Number: 6W7Z-54611B68-CB

Ford Crown Victoria Center Seat Belt, Black/Charcoal, Rear Part Number: 9W7Z-54600A38-AC

Ford Crown Victoria Lap & Shoulder Belt, Front Driver Side Part Number: 9W7Z-54611B09-AA

Ford Crown Victoria Lap & Shoulder Belt, Camel, Front Driver Side Part Number: 9W7Z-54611B09-AB

Ford Crown Victoria Buckle End, Prairie Tan/Slate Blue, Front Driver Side Part Number: F5AZ-5461203-E

Ford Crown Victoria Lap & Shoulder Belt, Black/Charcoal, Front Driver Side Part Number: BW7Z-5461200-BC

Ford Crown Victoria Lap & Shoulder Belt, Black/Charcoal, Front Driver Side Part Number: 9W7Z-54611B09-AC

Ford Crown Victoria Lap & Shoulder Belt, Slate Blue, Driver Side Part Number: YW7Z-54611B69-AAE

Ford Crown Victoria Center Seat Belt, Camel, Rear Part Number: 9W7Z-54600A38-AB

Ford Crown Victoria Buckle End, Slate Blue, Driver Side Part Number: YW7Z-5460045-AAB

Ford Crown Victoria Lap & Shoulder Belt, Camel, Rear Passenger Side Part Number: 9W7Z-54611B68-AB

Ford Crown Victoria Buckle End, Prairie Tan/Slate Blue, Front Passenger Side Part Number: F5AZ-5461202-E

Ford Crown Victoria Seat Belt

Ford Crown Victoria Seat Belt Parts and Q&A

Related Ford Crown Victoria Parts

Browse Ford Crown Victoria Seat Belt by Years