How to Install a Tie Rod End While Ensuring Proper Wheel Alignment on Ford Crown Victoria?

You should begin the tie rod end installation by keeping the clamp on the front wheel spindle tie-rod adjusting sleeve loose until checking the front wheel alignment. The installation sequence for left and right outer tie-rod ends maintains equivalence since the left side demonstrates an example. Insert the tie-rod end into the front wheel spindle adjusting sleeve while the clamp remains loose. After inserting the tie-rod end into its sleeve you must fasten it with a new nut and pin. Test the wheel alignment after vehicle lowering and perform corrective wheel alignment if required.

OEM Ford Crown Victoria Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Ford Crown Victoria Outer Tie Rod
Part Number: 2W7Z-3A130-A
$33.79 MSRP: $46.74
You Save: $12.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Outer Tie Rod, Driver Side
Part Number: 6W1Z-3A130-B
$61.66 MSRP: $101.45
You Save: $39.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Outer Tie Rod, Passenger Side
Part Number: 6W1Z-3A130-A
$64.86 MSRP: $106.73
You Save: $41.87 (40%)
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH Outer
- Position: Outer Passenger Side
- Replaces: 3W1Z-3A130-BA, MEOE-72
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Outer Tie Rod, Passenger Side
Part Number: 3W1Z-3A130-BA
$64.86 MSRP: $106.73
You Save: $41.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH Outer
- Position: Outer Passenger Side
- Replaced by: 6W1Z-3A130-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inner Tie Rod
Part Number: 2W7Z-3A131-A
$38.55 MSRP: $52.46
You Save: $13.91 (27%)
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Tie Rod End
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Outer Tie Rod, Driver Side
Part Number: 3W1Z-3A130-BB
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Tie Rod End

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Tie Rod End. We offer an extensive inventory of OEM Ford Crown Victoria Tie Rod End at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
2W7Z-3A130-A
Q: How to Install a Tie Rod End While Ensuring Proper Wheel Alignment on Ford Crown Victoria?
A: You should begin the tie rod end installation by keeping the clamp on the front wheel spindle tie-rod adjusting sleeve loose until checking the front wheel alignment. The installation sequence for left and right outer tie-rod ends maintains equivalence since the left side demonstrates an example. Insert the tie-rod end into the front wheel spindle adjusting sleeve while the clamp remains loose. After inserting the tie-rod end into its sleeve you must fasten it with a new nut and pin. Test the wheel alignment after vehicle lowering and perform corrective wheel alignment if required.