How to service and repair the brake backing plate on Ford E-150?

Starting the brake backing plate service and repair process requires removing the rear brake shoes together with linings first. The service begins by removing either the axle shaft independent of other parts or both the axle shaft and rear hub. The cable retainer needs compression until the parking brake rear cable and conduit can separate from the brake backing plate. The brake line fitting should be disconnected first while removing the two bolts that secure the rear wheel cylinder before extraction of the rear wheel cylinder itself. If you disconnect first the backing plate from the axle flange using its attached four nuts and bolts you can then freely remove the brake backing plate. To install the components follow the opposite order of removal while performing brake system bleeding as a final step.

OEM Ford E-150 Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Backing Plates found

View related parts
Ford E-150 Backing Plate, Rear Part Number: 8C2Z-2390-A
$116.79 MSRP: $170.00
You Save: $53.21 (32%)
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear; Brake Dust Shield; Splash Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Splash Shield, Front Driver Side Part Number: 8C2Z-2K005-A
$19.86 MSRP: $30.73
You Save: $10.87 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Splash Shield, Front Passenger Side Part Number: 8C2Z-2K004-A
$19.35 MSRP: $30.73
You Save: $11.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Backing Plate, Rear Part Number: 8C2Z-2390-B
$109.38 MSRP: $168.33
You Save: $58.95 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Backing Plate, Rear; Brake Dust Shield; Splash Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Backing Plate, Rear Part Number: F7UZ-2212-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Backing Plate, Rear Passenger Side Part Number: F7UZ-2211-AA
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Right; Brake Dust Shield
- Manufacturer Note: Plate asy. - rear wheel brake - RH
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Splash Shield, Front Driver Side Part Number: F6TZ-2K005-EA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Brake Dust Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Splash Shield, Front Passenger Side Part Number: F6TZ-2K004-EA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Brake Dust Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Splash Shield, Front Part Number: 4C2Z-2K005-AC
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front; Brake Dust Shield
- Manufacturer Note: RH & LH - (Use N611175-S2 to attach)
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford E-150 Brake Backing Plate

OEM Brake Backing Plate boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Backing Plate with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-150 Brake Backing Plate is used as a part to improve the brake systems offered in the different models of Ford E-150. Known for its toughness, this Brake Backing Plate offers the disc brakes a protective guard against such elements as dirt and rust; thus, enhancing the wheels' looks without interfering with the functionality of the disc brakes. The Ford E-150 Brake Backing Plate is made from premium quality and anti-corrosive material and the assortment covers the conventional one-piece and the advanced two-piece unit where the two-piece setup can be easily assembled and repaired without the need to remove the axle. This feature increases productivity greatly which contributes to E-150 owners' inclination to the model. The Brake Backing Plate also enables other critical brake parts; most importantly it avoids situations where the brake's components may stick, which is crucial to ensure the brake delivers excellent and safe operation at all times. Applicability to the Ford E-150 of different generations is one of its key strengths in the market targeting OEM automotive manufacturers. Through the proper function of the brake, the Ford E-150 Brake Backing Plate is very crucial in the improvement of safety and efficiency during the operation of the vehicle. Due to this reputation of reliability together with the niche specific functionalities, it is one of the best choices for those who wish to sustain the performance of their Ford E-150 vehicles. In general, the Ford E-150 Brake Backing Plate plays one of the very crucial roles in the braking mechanism that allows drivers have confidence in operating their vehicles.

Ford E-150 Brake Backing Plate Parts and Q&A

Backing Plate, Rear
F7UZ-2212-AA
Q: How to service and repair the brake backing plate on Ford E-150?
A:
Starting the brake backing plate service and repair process requires removing the rear brake shoes together with linings first. The service begins by removing either the Axle Shaft independent of other parts or both the axle shaft and rear hub. The cable retainer needs compression until the parking brake rear cable and conduit can separate from the brake backing plate. The brake line fitting should be disconnected first while removing the two bolts that secure the rear Wheel Cylinder before extraction of the rear wheel cylinder itself. If you disconnect first the backing plate from the axle flange using its attached four nuts and bolts you can then freely remove the brake backing plate. To install the components follow the opposite order of removal while performing brake system bleeding as a final step.