OEM Ford E-150 Econoline Vehicle Speed Sensor

Ford E-150 Econoline Vehicle Speed Sensor Parts and Q&A

• Speed Sensor
  E9LZ-9E731-A
  Q: How to Service and Repair the Front Vehicle Speed Sensor and Rear Vehicle Speed Sensor on Ford E-150 Econoline?

  A:

  A hoist-raised vehicle should begin the TSS sensor and OSS sensor servicing process by removing the rear transmission mount nuts. When putting the high lift transmission jack in place under the transmission position it carefully because raising the back too high could damage the TSS and OSS sensors. Start the process by detaching the rear transmission mount and elevate the transmission using support from the high lift transmission jack while removing the rear crossmember support bolts. Lower the transmission until essential access to TSS and OSS sensor components becomes possible. The TSS sensor requires removal by first unscrewing the bolt before removing the sensor itself. Remove the bolt from the OSS sensor position until you can remove the sensor itself. Apply lubrication before inserting the OSS sensor along with using the bolt to secure it. Apply lubrication to the TSS sensor before installing it followed by using its installation bolt. Avoid increasing the transmission back height because sensor damage could occur. The rear transmission mount should be mounted by using a transmission-lifting process followed by bolt attachment and finally lowering the transmission onto the rear crossmember support. Complete installation of rear transmission mount nuts and carefully lower down the car.