How to Service the Yaw Sensor on Ford E-150?

The first step to work on the yaw rate sensor requires you to disconnect the electrical connector of the stability control sensor cluster. The installation of stability control sensor cluster requires you to tighten the two bolts to 6 Nm (53 lb-in) after reinstallation. The sensor cluster removal should be followed by performing the installation steps in reverse order. The ABS module demands calibration through instructions accessed from the scan tool.

OEM Ford E-150 Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
Ford E-150 Yaw Rate Sensor Part Number: 7C2Z-3C187-A
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Sensor
- Manufacturer Note: Sensor - Yaw
- Replaces: 6C2Z-3C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-150 Yaw Sensor

OEM Yaw Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Yaw Sensor with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-150 Yaw Sensor Parts and Q&A

Yaw Rate Sensor
7C2Z-3C187-A
Q: How to Service the Yaw Sensor on Ford E-150?
A:
The first step to work on the yaw rate sensor requires you to disconnect the electrical connector of the stability control sensor cluster. The installation of stability control sensor cluster requires you to tighten the two bolts to 6 Nm (53 lb-in) after reinstallation. The sensor cluster removal should be followed by performing the installation steps in reverse order. The ABS module demands calibration through instructions accessed from the scan tool.