How to service the rear bumper on Ford E-250?

Service of the rear bumper requires complete removal of 4 retention nuts before tightening them to 70 Nm (52 lb-ft) during installation. You need to disconnect the rear parking aid sensor electrical connector. Owners should remove wiring retainers from trailer hitches when the vehicle features trailer hitch installation. Move on to detach the rear bumper after finishing these tasks. Continuation of installation requires the opposite order of disassembly.

How to service and repair the front bumper on Ford E-250?

Service or repair of the front bumper starts with removing the valence panel through a sequence including the A/C condenser air deflector detachment followed by unscrewing the 7 front bumper-to-valence panel screws and removing the 8 pushpin retainers and dislodging the wiring harness retainer for the block heater cord. A helper is necessary for unfastening the front bumper because it demands the removal of four nuts together with four bolts to completely separate the bumper. To install the bumper properly secure all fasteners at 80 Nm (59 lb-ft) before following the removal steps in reverse for assembly.

OEM Ford E-250 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Bumpers found

View related parts
Ford E-250 Bumper, Front Part Number: 8C2Z-17757-B
$673.91 MSRP: $791.67
You Save: $117.76 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Step Bumper, Rear Part Number: 7C2Z-17906-GPTM
$499.15 MSRP: $782.62
You Save: $283.47 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: F4UZ-17906-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cover, Rear Part Number: F2UZ-17K835-AAA
$187.29 MSRP: $272.62
You Save: $85.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Cover, Rear
- Manufacturer Note: Light Grey, XLT
- Position: Rear
- Replaces: F2UZ-17K835-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Step Bumper, Rear Part Number: 7C2Z-17906-H
$600.17 MSRP: $889.13
You Save: $288.96 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: F4UZ-17906-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Rear Part Number: 7C2Z-17906-F
$362.13 MSRP: $567.78
You Save: $205.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5C2Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Step Bumper, Rear Part Number: 7C2Z-17906-D
$767.14 MSRP: $964.58
You Save: $197.44 (21%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Chrome Finish
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Step Bumper, Rear Part Number: 7C2Z-17906-CPTM
$586.28 MSRP: $868.57
You Save: $282.29 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Rear Part Number: 7C2Z-17906-B
$406.72 MSRP: $597.23
You Save: $190.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Chrome Finish
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Front Part Number: 8C2Z-17757-APTM
$465.42 MSRP: $683.43
You Save: $218.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Rear Part Number: 7C2Z-17906-EPTM
$191.49 MSRP: $295.52
You Save: $104.03 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: F4UZ-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Rear Part Number: 7C2Z-17906-APTM
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Bumper, Front Part Number: 4C2Z-17757-DA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Bumper, Front Part Number: 4C2Z-17757-AAA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Replaces: XC2Z-17757-AAAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Bumper, Rear Part Number: F4UZ-17906-D
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Manufacturer Note: Chrome - non step type, w/ holes for step pad (must order 17K835 step pad separately)
- Position: Rear
- Replaces: F2UZ-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Ford E-250 Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Bumper Parts and Q&A

Step Bumper, Rear
7C2Z-17906-GPTM
Q: How to service the rear bumper on Ford E-250?
A:
Service of the rear bumper requires complete removal of 4 retention nuts before tightening them to 70 Nm (52 lb-ft) during installation. You need to disconnect the rear parking aid sensor electrical connector. Owners should remove wiring retainers from trailer hitches when the vehicle features trailer hitch installation. Move on to detach the rear bumper after finishing these tasks. Continuation of installation requires the opposite order of disassembly.
Bumper, Front
8C2Z-17757-B
Q: How to service and repair the front bumper on Ford E-250?
A:
Service or repair of the front bumper starts with removing the valence panel through a sequence including the A/C condenser air deflector detachment followed by unscrewing the 7 front bumper-to-valence panel screws and removing the 8 pushpin retainers and dislodging the wiring harness retainer for the block heater cord. A helper is necessary for unfastening the front bumper because it demands the removal of four nuts together with four bolts to completely separate the bumper. To install the bumper properly secure all fasteners at 80 Nm (59 lb-ft) before following the removal steps in reverse for assembly.