How to Service and Repair a Drive Shaft for Optimal Performance on Ford E-250 Econoline?

The service and repair of the rear one-piece driveshaft begins by properly raising and supporting the vehicle. The initial position of the driveshaft flange yoke to the pinion flange establishes driveline balance while a correct output shaft rotation requires the alignment of driveshaft yoke to transmission tailshaft. The front service includes removing four bolts securing the driveshaft to the pinion flange before lowering the driveshaft. Scrape the extension housing seal for problems signs and replace it with a fresh one if needed. The end of the transmission output shaft must be marked with paint along with the front of the driveshaft. Use Premium Long-Life Grease XG-1-C or -K or an equivalent product according to Ford specification ESA-M1C75-B for lubricating the slip-yoke spline. The proper driveshaft indexing technique uses conventional paint marks on both components but alternative indexing can be performed with index marks. Secure the driveshaft along its index marks using the driveshaft-to-pinion flange bolts after proper alignment. The original bolts require coating with Threadlock E0AZ-19554-AA or an equivalent that fulfills WSK-M2G351-A5 Ford specification.

OEM Ford E-250 Econoline Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Drive Shafts found

View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: 5C2Z-4602-G
$334.83 MSRP: $453.85
You Save: $119.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 3C2Z-4602-SA, 5C2Z-4602-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: 5C2Z-4602-K
$712.13 MSRP: $973.85
You Save: $261.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 3C2Z-4602-MA, 5C2Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002, 1997-1999 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: 5C2Z-4602-J
$736.31 MSRP: $1006.92
You Save: $270.61 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 5C2Z-4602-A, 3C2Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford E-250 Econoline | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: YC2Z-4602-EA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Drive Shaft
Part Number: XC2Z-4R602-DA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford E-250 Econoline | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: F7UZ-4602-RA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Econoline Drive Shaft, Rear
Part Number: F7UZ-4602-FA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Drive Shaft
Part Number: F7UZ-4602-EA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-250 Econoline | Base | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Ford E-250 Econoline Drive Shaft

Welcome to our website where you can discover high-quality, genuine Ford E-250 Econoline Drive Shaft. We offer an extensive inventory of OEM Ford E-250 Econoline Drive Shaft at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Econoline Drive Shaft Parts Questions & Experts Answers

Drive Shaft, Rear
5C2Z-4602-G
Q: How to Service and Repair a Drive Shaft for Optimal Performance on Ford E-250 Econoline?
A: The service and repair of the rear one-piece driveshaft begins by properly raising and supporting the vehicle. The initial position of the driveshaft flange yoke to the pinion flange establishes driveline balance while a correct output shaft rotation requires the alignment of driveshaft yoke to transmission tailshaft. The front service includes removing four bolts securing the driveshaft to the pinion flange before lowering the driveshaft. Scrape the extension housing seal for problems signs and replace it with a fresh one if needed. The end of the transmission output shaft must be marked with paint along with the front of the driveshaft. Use Premium Long-Life Grease XG-1-C or -K or an equivalent product according to Ford specification ESA-M1C75-B for lubricating the slip-yoke spline. The proper driveshaft indexing technique uses conventional paint marks on both components but alternative indexing can be performed with index marks. Secure the driveshaft along its index marks using the driveshaft-to-pinion flange bolts after proper alignment. The original bolts require coating with Threadlock E0AZ-19554-AA or an equivalent that fulfills WSK-M2G351-A5 Ford specification.