How to service and repair the Engine Oil Cooler on Ford E-250?

Service and repair of the Engine Oil Cooler begins with hoisting the car in neutral position. The service professional should drain both engine oil and engine cooling system fluids. Disconnect the two coolant hoses from the oil cooler followed by removing the oil filter which should be discarded. Mechanical issues are present if the oil cooler contains aluminum or metal debris; therefore, you should discard it. The installation process requires you to fit the tab on the oil filter adapter into the new oil cooler notch before positioning the new oil cooler and installing the threaded insert with a torque of 58 Nm (43 ft.lbs). Secure the new oil filter with a torque of 16 Nm (12 ft. lbs). Reassemble the coolant hoses to the oil cooler before finally fastening the oil drain plug to 23 Nm (17 ft. lbs). After installing the drain plug with a proper torque of 23 Nm (17 ft. lbs), replace the engine with clean oil before completing the engine cooling system fill and bleed.

OEM Ford E-250 Engine Oil Cooler

Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Oil Coolers found

View related parts
Ford E-250 Oil Cooler Part Number: 2C2Z-6A642-CC
$91.49 MSRP: $138.00
You Save: $46.51 (34%)
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Replaces: 2C2Z-6A642-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2019 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Oil Cooler Part Number: F7UZ-6A642-EA
$189.62 MSRP: $286.00
You Save: $96.38 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: Cooler O-ring is NOT serviced seperatly, For coolant hoses, refer to 8286 Lower Radiator hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Oil Cooler Part Number: F7UZ-6A642-AA
Product Specifications
- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: Includes seal, (Seal not serviced separately)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS

Ford E-250 Engine Oil Cooler

OEM Engine Oil Cooler boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Oil Cooler with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Engine Oil Cooler Parts and Q&A

Transmission Cooler
4C2Z-7A095-EA
Q: How to service and repair the Engine Oil Cooler on Ford E-250?
A:
Service and repair of the Engine Oil Cooler begins with hoisting the car in neutral position. The service professional should drain both engine oil and engine cooling system fluids. Disconnect the two coolant hoses from the oil cooler followed by removing the oil filter which should be discarded. Mechanical issues are present if the oil cooler contains aluminum or metal debris; therefore, you should discard it. The installation process requires you to fit the tab on the oil filter adapter into the new oil cooler notch before positioning the new oil cooler and installing the threaded insert with a torque of 58 Nm (43 ft.lbs). Secure the new oil filter with a torque of 16 Nm (12 ft. lbs). Reassemble the coolant hoses to the oil cooler before finally fastening the oil drain plug to 23 Nm (17 ft. lbs). After installing the drain plug with a proper torque of 23 Nm (17 ft. lbs), replace the engine with clean oil before completing the engine cooling system fill and bleed.