How to service the knock sensor (KS) on Ford E-250?

The knock sensor service requires starting with intake manifold removal. Service of the knock sensor begins with disconnection of the KS electrical connector and subsequent unbolt of the KS. Add the new KS before completing the installation by proceeding with the reverse steps while tightening the new KS bolt to 25 Nm (18 lb-ft).

OEM Ford E-250 Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
Ford E-250 Knock Sensor
Part Number: XL3Z-12A699-AA
$36.36 MSRP: $56.75
You Save: $20.39 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Knock Sensor
Part Number: XL3Z-12A699-CA
Product Specifications
- Other Name: Sensor - Engine Knock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS

Ford E-250 Knock Sensor

Welcome to our website where you can discover high-quality, genuine Ford E-250 Knock Sensor. We offer an extensive inventory of OEM Ford E-250 Knock Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Knock Sensor Parts Questions & Experts Answers

Knock Sensor
XL3Z-12A699-AA
Q: How to service the knock sensor (KS) on Ford E-250?
A: The knock sensor service requires starting with Intake Manifold removal. Service of the knock sensor begins with disconnection of the KS electrical connector and subsequent unbolt of the KS. Add the new KS before completing the installation by proceeding with the reverse steps while tightening the new KS bolt to 25 Nm (18 lb-ft).