How to Service and Repair the Vapor Canister on Ford E-250?

The first step for repairing or servicing the evaporative emission control canister requires a vehicle in neutral position with utilization of a hoist. Removing the ground cable from the battery minimizes the possibility of electric sparks that would endanger surrounding fuel vapors. First remove the spare tire before disconnecting the evap hose and tube followed by removing the evap canister vent solenoid electrical connector with its harness retainer. The maintenance procedure on van or wagon vehicles begins with unscrewing the heat shield bolts followed by the removal of heat shield retaining bolts. Begin by checking that all lower bolts from van or wagon automobiles have already been removed followed by removing the remaining bolts to disconnect the evap tube from the evap canister. End the process by taking out the evap canister from its bracket while treating both O-ring seals with clean engine oil before reinstalling the component through the reverse steps. Users should conduct an evaporative emission system leak test followed by completing the evaporative emission repair verification drive cycle after finishing installation.

OEM Ford E-250 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Vapor Canisters found

View related parts
Ford E-250 Vacuum Reservoir Part Number: 4C3Z-9E453-AA
$75.57 MSRP: $110.00
You Save: $34.43 (32%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Vacuum; Reservoir
- Manufacturer Note: includes check valve at "VAC" port
- Replaces: F7UZ-9E453-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Vapor Canister Part Number: BU5Z-9C985-B
$184.35 MSRP: $292.73
You Save: $108.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 9U5Z-9C985-A, BU5Z-9C985-A, 7L1Z-9C985-C, 7L1Z-9C985-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91
You Save: $106.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Vapor Canister Part Number: 9C2Z-9D653-H
$162.29 MSRP: $261.82
You Save: $99.53 (39%)
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Replaces: 9C2Z-9D653-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Vapor Canister Part Number: BC2Z-9D653-E
$176.80 MSRP: $290.91
You Save: $114.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Assembly
- Replaces: BC2Z-9D653-A, CX-2390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Vapor Canister Part Number: 6C2Z-9D653-E
$181.22 MSRP: $298.18
You Save: $116.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Manufacturer Note: Vapor Canister
- Replaces: 4C2Z-9D653-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Vapor Canister Part Number: 2C2Z-9D653-DA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete canister asy.,
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Vapor Canister Part Number: 6C2Z-9D653-D
Product Specifications
- Other Name: Reservoir Assembly
- Replaces: 4C2Z-9D653-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 5.4 L GAS

Ford E-250 Vapor Canister

OEM Vapor Canister boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Vapor Canister with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-250 Vapor Canister is one of the major components of the evaporative emissions control system commonly referred to as the EVAP and has proved to be very reliable in many E-250 models. Intended to stop hydrocarbon evaporate from floating into the atmosphere, the Vapor Canister actually stores fuel vapors with the help of activated charcoal. This rich design makes it possible for the Ford E-250 to improve the efficiency and safety measures while at the same time eliminating any harm causing emissions. A purge valve is opened when the engine is running, so the accumulated vapor combusts, allowing for fuel efficiency and its subsequent negative effect on the environment. The Ford E-250 Vapor Canister was differently incorporated, the modern systems are found to include replaceable filters and unique diagnostic services that assist in leakage detection and system preservation. Such feature makes it easily fitting to a variety of E-250 models so that all the vehicles can tap into modern advancements in emissions technology. Interestingly, the Vapor Canister which forms part and parcel of the system has other parts such; vent solenoids and pressure sensors which make it even better. The availability of Ford E-250 Vapor Canister can be seen to be distinct in the automotive market since it has appropriate toughness and environmental code as well as necessary feature destined for the happiness of a vehicle's performance and dependability of the E-250. In summary, the Ford E-250 Vapor Canister is a wonderful example of brand's commitment to creating vehicles with strong performance and those that have a small impact on the environment.

Ford E-250 Vapor Canister Parts and Q&A

Vacuum Reservoir
4C3Z-9E453-AA
Q: How to Service and Repair the Vapor Canister on Ford E-250?
A:
The first step for repairing or servicing the evaporative emission control canister requires a vehicle in neutral position with utilization of a hoist. Removing the ground cable from the battery minimizes the possibility of electric sparks that would endanger surrounding fuel vapors. First remove the spare tire before disconnecting the evap hose and tube followed by removing the evap canister vent solenoid electrical connector with its harness retainer. The maintenance procedure on van or wagon vehicles begins with unscrewing the heat shield bolts followed by the removal of heat shield retaining bolts. Begin by checking that all lower bolts from van or wagon automobiles have already been removed followed by removing the remaining bolts to disconnect the evap tube from the evap canister. End the process by taking out the evap canister from its bracket while treating both O-ring seals with clean engine oil before reinstalling the component through the reverse steps. Users should conduct an evaporative emission system leak test followed by completing the evaporative emission repair verification drive cycle after finishing installation.