How to Service and Repair the Exhaust Pipe on the Van/Wagon on Ford E-250?

Service or repair operations on the Van/Wagon exhaust crossover pipe should begin by placing the vehicle in neutral position on a hoist. Start the procedure by removing the engine cover and disconnecting both heated oxygen sensors (HO2S) and their electrical connectors and the catalyst monitor sensor. A safety stand should support the muffler with its tailpipe assembly and exhaust intermediate pipe before releasing the hanger isolators holding the front muffler and tailpipe. The Torca(R) clamp connecting the exhaust intermediate pipe to the exhaust Y-pipe needs to be released before reinstallation when torqued to 55 Nm (41 lb-ft). Detach the exhaust intermediate pipe together with the muffler and tailpipe from the exhaust Y-pipe for removal. To proceed with the disassembly sequence first unlatch the 2 LH and 1 RH heat shield-to-crossmember bolts before retightening these fasteners to 10 Nm (89 lb-in). During rebuild time the crossmember-to-rear transmission mount should receive 95 Nm (70 lb-ft) torque. Use a safety stand to maintain transmission rear support before taking out the RH and LH transmission crossmember-to-frame hardware which needs to be tightened to 81 Nm (60 lb-ft) at reinstall time. Discard the 4 exhaust Y-pipe-to-exhaust manifold nuts before pulling out the exhaust Y-pipe from the vehicle. Install the new upper and lower exhaust Y-pipe-to-exhaust manifold nuts by setting each one at 40 Nm (30 lb-ft). The reinstallation process requires executing the opposite steps using the same Torca(R) clamp orientation when using a new clamp.

OEM Ford E-250 Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Exhaust Pipes found

View related parts
Ford E-250 Tail Pipe Part Number: 8C2Z-5202-A
$36.53 MSRP: $47.61
You Save: $11.08 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Tip; Tail Pipe Extension; Extension Pipe
- Replaces: 4C2Z-5202-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 7C2Z-5A212-DA
$289.65 MSRP: $380.90
You Save: $91.25 (24%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Tail Pipe; Exhaust Pipe; Pipe - Exhaust - Front; Tail Pipe
- Position: Front
- Replaces: 4C2Z-5A212-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: F7UZ-5230-AA
$37.84 MSRP: $52.34
You Save: $14.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - 124" WB - Stripped Chassis
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Front Pipe Part Number: 4C2Z-5246-AA
$628.88 MSRP: $834.33
You Save: $205.45 (25%)
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Front Pipe Part Number: YC2Z-5246-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-FA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-CA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler
- Manufacturer Note: Muffler - E350 - stripped chassis & cutaway - 2000/2003 - BEFORE 11-14-02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-AA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.6L - 2000/2003
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: XC2Z-5A212-GA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Tail Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Tail Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: XC2Z-5A212-FA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Tail Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Tail Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: F7UZ-5230-HD
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - E150/250 - for vehicles built before 1999 also use XC2Z-5G209-AA damper - 1997/
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Tail Pipe Extension, Front Part Number: F7UZ-5202-AA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Exhaust Tip
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 7C2Z-5A212-CA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Tail Pipe; Exhaust Pipe; Pipe - Exhaust - Front; Tail Pipe
- Position: Front
- Replaces: 4C2Z-5A212-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 5C2Z-5A212-CA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Pipe - Exhaust - Front
- Manufacturer Note: Extension - 176" WB - 2005/
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 5C2Z-5A212-BA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Pipe - Exhaust - Front
- Manufacturer Note: Extension - 158" WB - 2005/
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 5C2Z-5A212-AA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Pipe - Exhaust - Front
- Manufacturer Note: Extension - 138" WB - 2005/
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Front Pipe Part Number: 1C2Z-5F250-BA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Front Pipe Part Number: 7C2Z-5A212-AA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Extension Pipe; Pipe - Exhaust - Front
- Position: Front
- Replaces: 4C2Z-5A212-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Extension Pipe, Front Part Number: 5C2Z-5A212-FA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Tail Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Pipe - Exhaust - Front; Tail Pipe
- Position: Front
- Replaces: 4C2Z-5A212-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS

Ford E-250 Exhaust Pipe

OEM Exhaust Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Pipe with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Exhaust Pipe is a part that is known to be trustworthy and powerful, necessary for the high working of the Ford E-250 series. Being an interface between important exhaust system components including manifold, catalytic converter, and muffler, the Exhaust Pipe guarantees safe discharge of hazardous fumes from the engine and, therefore, increases efficiency and safety. Fitted for diverse Ford E-250 models, it was designed optionally with headers for inline engine and with Y-pipes for V-engine sorts; this exhaust pipe is well-fitted for any kind of vehicle. The mandrel bending on the Exhaust Pipe helps to ensure that there are no sharp angles and restrictions on the tubing improving engine efficiency. Furthermore the Exhaust Pipe is designed with a view of overcoming problems such as rust and physical damage access, making it one of the most durable kinds of the Exhaust Pipe that can be used for some time. The most notable features are crossover and intermediate pipes which make the exhaust even more exceptional in the automotive market giving more power through the improved flow of the exhausts. In sum, the Exhaust Pipe represents the Ford brand imaging and its focus on performance to a great extent, which is why it can be recommended as a worthy upgrade for any Ford E-250.

Ford E-250 Exhaust Pipe Parts and Q&A

Front Pipe
7C2Z-5A212-AA
Q: How to Service and Repair the Exhaust Pipe on the Van/Wagon on Ford E-250?
A:
Service or repair operations on the Van/Wagon exhaust crossover pipe should begin by placing the vehicle in neutral position on a hoist. Start the procedure by removing the engine cover and disconnecting both heated Oxygen Sensors (HO2S) and their electrical connectors and the catalyst monitor sensor. A safety stand should support the Muffler with its tailpipe assembly and exhaust intermediate pipe before releasing the hanger isolators holding the front muffler and tailpipe. The Torca(R) clamp connecting the exhaust intermediate pipe to the exhaust Y-pipe needs to be released before reinstallation when torqued to 55 Nm (41 lb-ft). Detach the exhaust intermediate pipe together with the muffler and tailpipe from the exhaust Y-pipe for removal. To proceed with the disassembly sequence first unlatch the 2 LH and 1 RH heat shield-to-crossmember bolts before retightening these fasteners to 10 Nm (89 lb-in). During rebuild time the crossmember-to-rear transmission mount should receive 95 Nm (70 lb-ft) torque. Use a safety stand to maintain transmission rear support before taking out the RH and LH transmission crossmember-to-frame hardware which needs to be tightened to 81 Nm (60 lb-ft) at reinstall time. Discard the 4 exhaust Y-pipe-to-Exhaust Manifold nuts before pulling out the exhaust Y-pipe from the vehicle. Install the new upper and lower exhaust Y-pipe-to-exhaust manifold nuts by setting each one at 40 Nm (30 lb-ft). The reinstallation process requires executing the opposite steps using the same Torca(R) clamp orientation when using a new clamp.