How to service the RH temperature blend door actuator for the dual-zone EATC on Ford Edge?

The maintenance process for the RH temperature blend door actuator within the dual-zone Electronic Automatic Temperature Control requires the removal of three screws and the detachment of its electrical connector after disconnecting the glove compartment damper and removing the glove compartment itself followed by removing the glove compartment damper and removing the glove compartment itself. You must detach the RH lower instrument panel insulator followed by the RH lower floor console trim panel from the system. The three retaining screws fastening the RH temperature blend door actuator will need to be unscrewed before detaching its wiring connector and removing the device completely. Check the RH temperature blend door linkage for possible incorrect placement as well as for any binding or damage. When replacing the actuator alone without issues in the linkage you do not need new parts from the service part kit. You must detach the two retaining tabs in order to remove the linkage. The reverse process used for removal must be executed to finish the installation.

How to service the LH temperature blend door actuator on Ford Edge?

Service of the LH temperature blend door actuator requires first removing the two lower steering column opening cover bolts along with detaching the cover. After disconnecting the in-vehicle temperature sensor aspirator hose along with its electrical connector you should position the instrument panel wire harness appropriately. First remove three screws from the LH temperature blend door actuator and disconnect its electrical connector to detach the actuator itself. The LH temperature blend door linkage should undergo an inspection for improper placement as well as binding or damage. Detach the two retaining tabs for removing only the linkage. Follow the opposite steps to installation while remembering that new parts in the service kit should be omitted when the original components are in good condition.

OEM Ford Edge Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Blend Door Actuators found

View related parts
Ford Edge Door Actuator Part Number: GS7Z-19E616-C
$36.27 MSRP: $56.60
You Save: $20.33 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Adjustment Control Motor; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Mode Motor; Motor
- Manufacturer Note: Air Inlet (Recirculation)
- Replaces: DG9Z-19E616-C, YH-1907
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Temperature Door Actuator Part Number: GS7Z-19E616-B
$29.67 MSRP: $47.11
You Save: $17.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Mode Motor; Motor
- Manufacturer Note: Temperature Control
- Replaces: DG9Z-19E616-A, YH-1905
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Blower Motor Part Number: GS7Z-19E616-A
$64.59 MSRP: $102.56
You Save: $37.97 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Defrost Mode Door Actuator; HVAC Floor Mode Door Actuator; HVAC Heater Blend Door Actuator; Door Actuator; Adjust Motor; Mode Motor; Motor; Actuator
- Manufacturer Note: Mode Control
- Replaces: YH-1906, DG9Z-19E616-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Mode Motor Part Number: 7T4Z-19E616-D
$57.88 MSRP: $97.00
You Save: $39.12 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Defrost Mode Door Actuator; HVAC Air Inlet Door Actuator
- Manufacturer Note: Defrost/Panel/Floor Door
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Mode Motor, Driver Side Part Number: 7T4Z-19E616-B
$52.97 MSRP: $87.16
You Save: $34.19 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator, Left; HVAC Blend Door Actuator
- Manufacturer Note: Temperature Blend Door
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Mode Motor, Passenger Side Part Number: 7T4Z-19E616-C
$55.68 MSRP: $91.62
You Save: $35.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator, Right
- Manufacturer Note: Temperature Blend Door
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Mode Motor Part Number: 7T4Z-19E616-A
$55.74 MSRP: $93.40
You Save: $37.66 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator
- Manufacturer Note: Air Inlet Mode Door
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Mode Motor Part Number: CT4Z-19E616-A
$68.77 MSRP: $109.20
You Save: $40.43 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Linkage Assembly; HVAC Air Inlet Door Actuator
- Manufacturer Note: Air Inlet Mode Door
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Edge | Limited, SE, SEL, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

Ford Edge Blend Door Actuator

OEM Blend Door Actuator boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Blend Door Actuator with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Edge Blend Door Actuator Parts and Q&A

Mode Motor, Passenger Side
7T4Z-19E616-C
Q: How to service the RH temperature blend door actuator for the dual-zone EATC on Ford Edge?
A:
The maintenance process for the RH temperature blend door actuator within the dual-zone Electronic Automatic Temperature Control requires the removal of three screws and the detachment of its electrical connector after disconnecting the glove compartment damper and removing the glove compartment itself followed by removing the glove compartment damper and removing the glove compartment itself. You must detach the RH lower instrument panel insulator followed by the RH lower floor console trim panel from the system. The three retaining screws fastening the RH temperature blend door actuator will need to be unscrewed before detaching its wiring connector and removing the device completely. Check the RH temperature blend door linkage for possible incorrect placement as well as for any binding or damage. When replacing the actuator alone without issues in the linkage you do not need new parts from the service part kit. You must detach the two retaining tabs in order to remove the linkage. The reverse process used for removal must be executed to finish the installation.
Mode Motor
7T4Z-19E616-A
Q: How to service the LH temperature blend door actuator on Ford Edge?
A:
Service of the LH temperature blend door actuator requires first removing the two lower steering column opening cover bolts along with detaching the cover. After disconnecting the in-vehicle temperature sensor aspirator hose along with its electrical connector you should position the instrument panel wire harness appropriately. First remove three screws from the LH temperature blend door actuator and disconnect its electrical connector to detach the actuator itself. The LH temperature blend door linkage should undergo an inspection for improper placement as well as binding or damage. Detach the two retaining tabs for removing only the linkage. Follow the opposite steps to installation while remembering that new parts in the service kit should be omitted when the original components are in good condition.