How to service and repair the heater core on Ford Edge?

A pressure leak test should come first when servicing the heater core due to suspected leakage. The heater core removal process starts with eliminating the heater core along with evaporator core housing while you afterward detach the six floor duct screws and floor duct. First remove the heater core tube dash panel seal before proceeding to remove the heater tube bracket screw and heater tube bracket. First disconnect the wire harness from the plenum chamber then remove the five fresh air inlet duct screws followed by the fresh air inlet duct. Screw Removal from the lower facing plenum chamber occurs while the heater core and evaporator core housing should remain vertical with the chamber-facing direction. Detach the plenum chamber from the vehicle by first removing the upper facing plenum chamber screw and the two plenum chamber clips while paying attention to keep the evaporator core in place. Users must handle the heater core by its core-side connections to the tubes before pulling it partly from the plenum chamber and then pulling it out completely by grasping the core top. Before reinstalling the evaporator core a proper inspection of the drain seal installation must occur with proper reinstallation necessary followed by core placement. The installation process ends by performing the reverse procedure to removal.

OEM Ford Edge Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Heater Cores found

View related parts
Ford Edge Evaporator Assembly Part Number: K2GZ-19B555-BG
$988.76 MSRP: $1598.00
You Save: $609.24 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator And Housing Assembly; HVAC Unit Case Assembly; Case Assembly; A/C & Heater Assembly
- Replaces: DG9Z-19B555-L, DG9Z-19B555-EV, DG9Z-19B555-EN, DG9Z-19B555-DK, K2GZ-19B555-BB, DG9Z-19B555-CT, DG9Z-19B555-T, DG9Z-19B555-DR, K2GZ-19B555-BE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Evaporator Assembly Part Number: K2GZ-19B555-AE
$1009.80 MSRP: $1496.00
You Save: $486.20 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator And Housing Assembly; HVAC Unit Case Assembly; Case Assembly
- Replaces: DG9Z-19B555-AT, DG9Z-19B555-S, DG9Z-19B555-DL, DG9Z-19B555-K, DG9Z-19B555-AU, K2GZ-19B555-AB, DG9Z-19B555-DQ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Heater Core Part Number: DG9Z-18476-A
$143.14 MSRP: $235.53
You Save: $92.39 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator And Seal Assembly - Heater; HVAC Heater Core
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Heater Core Part Number: 7T4Z-18476-A
$108.30 MSRP: $181.82
You Save: $73.52 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core Assembly - Heater; HVAC Heater Core
- Manufacturer Note: Includes Seal
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

Ford Edge Heater Core

OEM Heater Core boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Heater Core with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Heater Core in Ford Edge cars relays the responsibility of warming the interior of the car by making use of the heat the engine produces. Looking like a miniature radiator, the core in its turn, is cooled by a solution of water comprising antifreeze, and disperses heat to the cabin air as the fan blows through it. Some types of Heater Cores could have temperature controls such as valves/doors with reference to complexity some systems have electromechanical actuators and thermistors. In air-conditioned vehicles the heater core also plays a role in dehumidification when warm air re-circulating routes pass through it. Some of the problems that may be observed include blockage, dripping, and rust, and replacement entails a long process because of the core position in the automobile behind the glove.

Ford Edge Heater Core Parts and Q&A

Heater Core
7T4Z-18476-A
Q: How to service and repair the heater core on Ford Edge?
A:
A pressure leak test should come first when servicing the heater core due to suspected leakage. The heater core removal process starts with eliminating the heater core along with evaporator core housing while you afterward detach the six floor duct screws and floor duct. First remove the heater core tube dash panel seal before proceeding to remove the heater tube bracket screw and heater tube bracket. First disconnect the wire harness from the plenum chamber then remove the five fresh air inlet duct screws followed by the fresh air inlet duct. Screw Removal from the lower facing plenum chamber occurs while the heater core and evaporator core housing should remain vertical with the chamber-facing direction. Detach the plenum chamber from the vehicle by first removing the upper facing plenum chamber screw and the two plenum chamber clips while paying attention to keep the evaporator core in place. Users must handle the heater core by its core-side connections to the tubes before pulling it partly from the plenum chamber and then pulling it out completely by grasping the core top. Before reinstalling the evaporator core a proper inspection of the drain seal installation must occur with proper reinstallation necessary followed by core placement. The installation process ends by performing the reverse procedure to removal.