How to Service the Rear Crankshaft Seal on Ford Edge?

Start the crankshaft rear seal servicing after positioning the vehicle in neutral on a hoist. Start by removing both the flexplate along with the crankshaft sensor ring. You need the crankshaft rear oil seal remover and slide hammer to take away and dispose of the worn-out crankshaft rear seal. All sealing surfaces require metal surface prep cleaning before proceeding. Engine oil should be used to both lubricate new crankshaft rear seals and the installation bore. Set the rear main seal installer against the end of the crankshaft and place a new crankshaft rear seal onto the tool. Proceed with the rear main seal installer while using the handle to insert the new crankshaft rear seal then continue with installation of the crankshaft sensor ring and the flexplate.

How to service the front crankshaft seal on Ford Edge?

Service operations on the front crankshaft seal should begin by positioning the vehicle in neutral gear with the assistance of a hoist. Separate the crankshaft pulley before pulling out and discarding the crankshaft front seal by using an oil seal remover. The application of metal surface preparation needs to occur before moving forward with cleaning the sealing areas. Clean engine oil must be applied before installing the engine front cover by pouring it into the front seal bore of the crankshaft. The correct tools for installing the new crankshaft front seal are the front crankshaft seal installer and crankshaft vibration damper installer. Finally, reinstall the crankshaft pulley.

OEM Ford Edge Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Crankshaft Seals found

View related parts
Ford Edge Rear Main Seal Retainer Part Number: CG1Z-6335-B
$47.18 MSRP: $67.50
You Save: $20.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Oil Seal
- Replaces: 7T4Z-6K301-A, AT4Z-6K301-B, CG1Z-6K301-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Edge | Limited, SE, SEL, Sport, Titanium | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Oil Seal, Front Part Number: XW4Z-6700-AA
$10.89 MSRP: $15.45
You Save: $4.56 (30%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: XW4Z-6700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2018 Ford Edge | Limited, SE, SEL, SEL Plus, Sport, Titanium | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Rear Main Seal Part Number: AT4Z-6701-A
$34.92 MSRP: $50.83
You Save: $15.91 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Rear Seal; Engine Crankshaft Seal
- Position: Rear
- Replaces: 7T4Z-6701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023, 2007-2013 Ford Edge | Limited, SE, SEL, SEL Plus, Sport, ST | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Crankshaft Seal, Front Part Number: XW4Z-6700-B
$11.57 MSRP: $16.42
You Save: $4.85 (30%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Front Seal; Front Cover Seal; Crankshaft Seal Gasket; Engine Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | Sport, ST | 6 Cyl 2.7 L GAS
View related parts
Ford Edge Rear Main Seal Retainer Part Number: AT4Z-6K301-B
$47.18 MSRP: $67.50
You Save: $20.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft; Retainer - Crankshaft Oil Seal
- Replaced by: CG1Z-6335-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2013 Ford Edge | Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Rear Main Seal Retainer Part Number: 7T4Z-6K301-A
$47.18 MSRP: $67.50
You Save: $20.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft; Retainer - Crankshaft Oil Seal
- Replaced by: CG1Z-6335-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Edge Rear Main Seal Part Number: 1S7Z-6A321-B
$59.56 MSRP: $86.70
You Save: $27.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Rear Seal; Rear Main Seal Retainer
- Position: Rear
- Replaces: 1S7Z-6D309-AA, 1S7Z-6K301-AA, 1S7Z-6K301-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2023 Ford Edge | Limited, SE, SEL, ST-Line, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Oil Seal, Front Part Number: CM5Z-6700-E
$8.94 MSRP: $12.68
You Save: $3.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly - Crankshaft Oil - Front; Engine Crankshaft Seal; Timing Cover Gasket & Seal.; Front Crank Seal; Front Seal; Front Cover Seal; Timing Cover Front Seal
- Position: Front
- Replaces: 1S7Z-6700-AA, CM5Z-6700-C, 9E5Z-6700-A, CM5Z-6700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2024 Ford Edge | Limited, SE, SEL, ST-Line, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Rear Main Seal Retainer Part Number: JT4Z-6335-B
$29.31 MSRP: $42.67
You Save: $13.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Oil Seal
- Replaced by: JT4Z-6335-C
- Replaces: JT4Z-6335-A, FT4Z-6335-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Edge | Sport, ST | 6 Cyl 2.7 L GAS

Ford Edge Crankshaft Seal

OEM Crankshaft Seal boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Crankshaft Seal with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Crankshaft Seal in Ford Edge is yet another model of automobiles that is installed in front of the engine and its purpose is to prevent oil leakage from the crankcase. This round type seal is typically made of metal with some rubber content it's important for ensuring the flow of oil to the engine hence decreasing friction and subsequent wearing out of the various parts of the engine. Eventually, a Ford Edge can be built with a defective Crankshaft Seal, and there are symptoms of oil leakage or other problems, mainly if the car is old enough. However, it is noteworthy that some existing distinctions between designs of different models of Ford Edge are possible due to progress in materials or engineering. Checking of the Crankshaft Seal and replace when necessary are recommended for Ford Edge to achieve maximum performance of the vehicle's engine.

Ford Edge Crankshaft Seal Parts and Q&A

Rear Main Seal
AT4Z-6701-A
Q: How to Service the Rear Crankshaft Seal on Ford Edge?
A:
Start the crankshaft rear seal servicing after positioning the vehicle in neutral on a hoist. Start by removing both the flexplate along with the crankshaft sensor ring. You need the crankshaft rear oil seal remover and slide hammer to take away and dispose of the worn-out crankshaft rear seal. All sealing surfaces require metal surface prep cleaning before proceeding. Engine oil should be used to both lubricate new crankshaft rear seals and the installation bore. Set the rear main seal installer against the end of the crankshaft and place a new crankshaft rear seal onto the tool. Proceed with the rear main seal installer while using the handle to insert the new crankshaft rear seal then continue with installation of the crankshaft sensor ring and the flexplate.
Oil Seal, Front
XW4Z-6700-AA
Q: How to service the front crankshaft seal on Ford Edge?
A:
Service operations on the front crankshaft seal should begin by positioning the vehicle in neutral gear with the assistance of a hoist. Separate the crankshaft pulley before pulling out and discarding the crankshaft front seal by using an oil seal remover. The application of metal surface preparation needs to occur before moving forward with cleaning the sealing areas. Clean engine oil must be applied before installing the engine front cover by pouring it into the front seal bore of the crankshaft. The correct tools for installing the new crankshaft front seal are the front crankshaft seal installer and crankshaft vibration damper installer. Finally, reinstall the crankshaft pulley.