How to service and repair the harmonic balancer and crankshaft pulley on Ford Edge?

Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in neutral. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both the accessory drive belt and power steering belt.

OEM Ford Edge Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Harmonic Balancers found

View related parts
Ford Edge Crankshaft Pulley Part Number: 8T4Z-6312-A
$171.75 MSRP: $250.00
You Save: $78.25 (32%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer; Pulley
- Manufacturer Note: For Service Engines Built After July 2016 Use 8T4Z-6312-C & HL3Z-6A340-A (M10 X 90MM) Bolt
- Replaces: 7T4Z-6312-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2018 Ford Edge | Limited, SE, SEL, SEL Plus, Sport, Titanium | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Crankshaft Pulley Part Number: NJ5Z-6312-A
$128.88 MSRP: $198.33
You Save: $69.45 (36%)
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Engine Crankshaft Pulley; Vibration Damper; Pulley
- Replaces: CJ5Z-6312-F, CJ5Z-6312-C, CJ5Z-6312-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, ST-Line, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Crankshaft Pulley Part Number: NL3Z-6312-A
$113.86 MSRP: $165.73
You Save: $51.87 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley - Crankshaft; Vibration Damper; Pulley
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | Sport, ST | 6 Cyl 2.7 L GAS
View related parts
Ford Edge Crankshaft Pulley Part Number: AG9Z-6312-B
Product Specifications
- Other Name: Pulley - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer; Pulley
- Manufacturer Note: Includes Bolt
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Edge | Limited, SE, SEL | 4 Cyl 2.0 L GAS

Ford Edge Harmonic Balancer

OEM Harmonic Balancer boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Harmonic Balancer with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Harmonic Balancer is a vital part that improves on the durability and efficiency of the Ford Edge automobiles by absorbing the solidity torques that are established during combustion and alleviating torsional vibrations. This component is considered as the innovational one because, when managing the crankshaft load, it shields the engine from the possible damage. The Harmonic Balancer usually contains considerable metallic hub connected to the crank shaft, large inertia ring that is kept in place by a flexible rubber ring that assists in adapting the harmonic balance to various driving conditions. The compatibility of different Ford Edge models; the standard models, the performance models; means the drivers can keep engine efficiency and safety across these models. The performance harmonic balancers are quite special since they are designed to reduce vibrations to Modified Engines while passing SFI 18.1 for racing engines. When compared to the other automotive products, the Harmonic Balancer is versatile since it serves both the average car user and the performance users. Also, the Ford Edge's roomy interior and powerful components like the turbocharged engine and all-wheel drive add to the model's desirability. Apart from considering the Ford Engine Harmonic Balancer as a key component in their car, Ford considers not only the health of the engine but also provides a smoother, safer driving experience and making the Ford Edge as a trusted crossover SUV.

Ford Edge Harmonic Balancer Parts and Q&A

Crankshaft Pulley
8T4Z-6312-A
Q: How to service and repair the harmonic balancer and crankshaft pulley on Ford Edge?
A:
Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in neutral. Start by removing both accessories Drive Belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both the accessory drive belt and power steering belt.