Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 8T4Z-6312-A
Crankshaft Pulley

2007-2018 Ford 8T4Z6312A

Customer Questions & Expert Answers (8)
Ford 8T4Z-6312-A Crankshaft Pulley
Ford 8T4Z-6312-A Crankshaft Pulley
Ford 8T4Z-6312-A Crankshaft Pulley
  • Part Description
    Pulley - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer
  • Base No.
    6312
  • Replaces
    7T4Z-6312-B
  • Manufacturer
    Ford
Make sure this part fits
$171.75 MSRP: $250.00
You Save: $78.25 (32%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 8T4Z-6312-A Crankshaft Pulley is Ref No. 29 in the diagram below

    2015 Ford Taurus Crankshaft Pulley Diagram for 8T4Z-6312-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 8T4Z-6312-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2018 Ford EdgeLimited, SE, SEL, SEL Plus, Sport, Titanium6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    2011-2017 Ford ExplorerBase, Limited, Platinum, Sport, XLT6 Cyl 3.5 L GAS
    2009-2016 Ford FlexLimited, SE, SEL, Titanium6 Cyl 3.5 L GAS
    2010-2012 Ford FusionSport6 Cyl 3.5 L GAS
    2013-2017 Ford Police Interceptor SedanBase6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
    2013-2017 Ford Police Interceptor UtilityBase6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
    2008-2017 Ford TaurusLimited, SE, SEL, SHO6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2009-2016 Lincoln MKSBase, EcoBoost6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    2010-2016 Lincoln MKTBase, EcoBoost6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Will this 8T4Z-6312-A work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8T4Z-6312-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Ford Edge? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Ford Flex? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Ford Taurus X? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Lincoln MKX? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Ford Taurus? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Lincoln MKS? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the harmonic balancer and crankshaft pulley on Mercury Sable? Posted by Customer
    A:
    Start harmonic balancer and crankshaft pulley repair by hoisting the vehicle to a work position with its gear in NEUTRAL. Start by removing both accessories drive belt and power steering belt from the system. The Strap Wrench should be employed to detach the crankshaft bolt and washer which needs disposal. A 3 Jaw Puller should be used to remove the crankshaft pulley after positioning it at the right location. To properly install the components apply clean engine oil to both the front seal inner lip of the crankshaft and the sealing surfaces of the outside diameter. The Front Cover Oil Seal Installer along with Crankshaft Vibration Damper Replacer should be used to install the crankshaft pulley. The Strap Wrench must be used for washer and bolt installation before performing four successive torque stages starting from 120 Nm to 50 Nm followed by 90-degree tightening. Finishing the procedure requires installing both theAccessory Drive belt and Power Steering belt.
    Posted by FordPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Crankshaft Pulley 8T4Z-6312-A Designed for Proper Fit and Performance

The Ford part 8T4Z-6312-A Crankshaft Pulley as a genuine Ford Crankshaft Pulley, Harmonic Balancer component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 8T4Z-6312-A Crankshaft Pulley is used with Ford Explorer, Fusion, Edge vehicles and Mercury Sable models and Lincoln MKZ, MKX, MKS models. The original Ford part will bear the manufacturer part number: 8T4Z-6312-A and where it is made at Ford. It has the code: 6312.
This component has dimensions of 7.9 x 8.0 x 4.9 inches and its weight is approximately 7.20 Pounds. The part 8T4Z6312A is available in New condition while meeting the standards of the product rating. The Pulley - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 8T4Z-6312-A can be known as Pulley, and it replaces 7T4Z-6312-B. The inventory reference for this item is SKU: 8T4Z-6312-A. Additional manufacturer-provided details include: For Service Engines Built After July 2016 Use 8T4Z-6312-C & HL3Z-6A340-A (M10 X 90MM) Bolt. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.