How Should the Air Bag Sensor in the Second Row, C-Pillar, Be Serviced to Minimize Injury Risk During SRS Repairs on Ford Escape?

Personnel performing SRS repairs on the side impact sensor in the C-pillar of the second row must always use safety glasses to prevent injury risks during the process. Check the orientation accuracy of the vehicle sensor for correct system operation; examine the sensor mounting bracket as well as the wiring pigtail for deformation after a collision but replace both components and reinstall them correctly when damage occurs even without air bag deployment. The use of memory saver devices should be avoided to avoid personal injuries. An air bag warning lamp comes on when the RCM fuse is removed under ON ignition conditions because this is a standard system function that shows no SRS faults. Complete functionality and total elimination of faults are mandatory for the SRS before the vehicle can return to its customer. Part replacement serves as the requirement for repairs but you must reinstall the original part if the issue remains after which you should re-run the diagnostic process. The process starts with system depowering before removing both C-pillar trim panel and side impact sensor bolt. The side impact sensor requires removal while disconnecting its electrical connector. Sequence the installation by connecting the new side impact sensor to its electrical connector while also cleaning both the C-pillar mating surface and the sensor parts. The sensor locator tabs should be placed into the C-pillar sheet metal openings before installing the side impact sensor bolt with 9 Nm (80 lb-in) torque and completing the reinstallation of the C-pillar trim panel and system repowering sequence.

OEM Ford Escape Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Air Bag Sensors found

View related parts
Ford Escape Side Impact Sensor, Center Part Number: H2GZ-14B345-A
$63.26 MSRP: $92.08
You Save: $28.82 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center; Air Bag Sensor; Side Sensor
- Position: Center
- Replaces: DS7Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Rear Sensor, Front Part Number: HS7Z-14B004-A
$42.41 MSRP: $66.18
You Save: $23.77 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Impact Sensor, Front Part Number: CP9Z-14B004-A
$85.88 MSRP: $144.18
You Save: $58.30 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Side Impact Sensor, Center Part Number: HM5Z-14B345-A
$52.73 MSRP: $78.97
You Save: $26.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH/LH
- Position: Center
- Replaces: CP9Z-14B345-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Escape | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Escape Side Impact Sensor, Rear Part Number: 9L1Z-14B345-A
$38.79 MSRP: $56.47
You Save: $17.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Side Sensor
- Position: Rear
- Replaces: 8L1Z-14B345-B, 7L1Z-14B345-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Escape | Hybrid, Limited, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Side Impact Sensor Part Number: YL8Z-14B345-BA
$75.79 MSRP: $104.85
You Save: $29.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford Escape | Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Side Impact Sensor, Front Part Number: 9L8Z-14B345-A
$17.58 MSRP: $24.93
You Save: $7.35 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Side Impact Sensor, Center Part Number: JX7Z-14B345-A
$66.56 MSRP: $96.88
You Save: $30.32 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Center, Rear; Air Bag Sensor; Side Sensor
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Front Impact Sensor Part Number: 9L8Z-14B004-A
$63.03 MSRP: $105.82
You Save: $42.79 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front, Rear; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Front Sensor Part Number: 8L8Z-14B004-B
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor
- Position: Front
- Replaces: 8L8Z-14B004-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Escape | Hybrid, Limited, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Impact Sensor, Front Part Number: 6L1Z-14B004-AA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor
- Position: Front
- Replaces: 4L1Z-14B006-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Front Impact Sensor Part Number: 6R3Z-14B345-BB
Product Specifications
- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Side Impact Sensor; Side Impact Bag; Side Sensor
- Position: Front
- Replaces: 6R3Z-14B345-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Ford Escape Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Specifically, the Ford Escape Air Bag Sensor can be appropriately described as a critical safety system of Ford Escape Vehicles because of its reliability in the vehicles' performance. This part is an important crash sensor that measures the impact and immediately triggers the firing of the control unit to ignite the air bags to shield the occupants in case of an accident. The Ford Escape is a small crossover SUV assembled in four generations since 2000; the company uses this Air Bag Sensor across the models while emphasizing safety and efficiency. thus reassures the safety of ford escape and increases the car's reliability for those focused on safety gear. Incorporating latest technological patterns like intelligent all-wheel drive and superior airbag systems, which are featured in the later models, Ford Escape exemplify its notion of holding occupants' safety as a priority. In relation to the automotive market, new technology is the Air Bag Sensor since it ten critically involved in the response to an accident so that air bags may open properly during an impact. This reliability also improves the performance of the Ford Escape, along with offering protection to the occupants of the vehicle. Therefore, the Ford Escape Air Bag Sensor is not just the part of the vehicle, but the essence which proves the company's commitment to generate the vehicles that are safe, fuel-efficient and suitable for the contemporary consumer.

Ford Escape Air Bag Sensor Parts and Q&A

Impact Sensor, Front
6L1Z-14B004-AA
Q: How Should the Air Bag Sensor in the Second Row, C-Pillar, Be Serviced to Minimize Injury Risk During SRS Repairs on Ford Escape?
A:
Personnel performing SRS repairs on the side impact sensor in the C-pillar of the second row must always use safety glasses to prevent injury risks during the process. Check the orientation accuracy of the vehicle sensor for correct system operation; examine the sensor mounting bracket as well as the wiring pigtail for deformation after a collision but replace both components and reinstall them correctly when damage occurs even without air bag deployment. The use of memory saver devices should be avoided to avoid personal injuries. An air bag warning lamp comes on when the RCM fuse is removed under ON ignition conditions because this is a standard system function that shows no SRS faults. Complete functionality and total elimination of faults are mandatory for the SRS before the vehicle can return to its customer. Part replacement serves as the requirement for repairs but you must reinstall the original part if the issue remains after which you should re-run the diagnostic process. The process starts with system depowering before removing both C-pillar trim panel and side impact sensor bolt. The side impact sensor requires removal while disconnecting its electrical connector. Sequence the installation by connecting the new side impact sensor to its electrical connector while also cleaning both the C-pillar mating surface and the sensor parts. The sensor locator tabs should be placed into the C-pillar sheet metal openings before installing the side impact sensor bolt with 9 Nm (80 lb-in) torque and completing the reinstallation of the C-pillar trim panel and system repowering sequence.