What are the steps involved in servicing the Occupant Detection Sensor system on Ford Escape?

The Occupant Detection Sensor (ODS) system should be serviced as a system. In case of a replacement of a component, install a new ODS service kit. Make sure that the SRS is functioning and then take out the passenger seat. Procedures of disassembly and installation must be followed, the ODS system must be reset and the functionality of SRS checked afterwards.

OEM Ford Escape Occupant Detection Sensor

OPDS Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Occupant Detection Sensors found

View related parts
Ford Escape Position Sensor, Front Part Number: 7T4Z-14B416-B
$26.36 MSRP: $37.38
You Save: $11.02 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Seat Position; Seat Track Position Sensor, Front, Left; Air Bag Sensor; Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2012 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Position Sensor, Passenger Side Part Number: JJ5Z-14B416-B
$20.56 MSRP: $29.17
You Save: $8.61 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Seat Position; Seat Track Position Sensor, Front Right, Right
- Position: Passenger Side
- Replaced by: JJ5Z-14B416-E
- Replaces: DG9Z-14B416-B, DG9Z-14B416-F, JJ5Z-14B416-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Position Sensor, Front Driver Side Part Number: JJ5Z-14B416-A
$27.69 MSRP: $41.20
You Save: $13.51 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Seat Position; Front Left Seat Track Position Sensor; Seat Recline Position Sensor.
- Position: Front Driver Side
- Replaces: JJ5Z-14B416-C, DG9Z-14B416-E, DG9Z-14B416-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)

Ford Escape Occupant Detection Sensor

Welcome to our website where you can discover high-quality, genuine Ford Escape Occupant Detection Sensor. We offer an extensive inventory of OEM Ford Escape Occupant Detection Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Escape Occupant Detection Sensor Parts and Q&A

Position Sensor, Front
7T4Z-14B416-B
Q: What are the steps involved in servicing the Occupant Detection Sensor system on Ford Escape?
A: The Occupant Detection Sensor (ODS) system should be serviced as a system. In case of a replacement of a component, install a new ODS service kit. Make sure that the SRS is functioning and then take out the passenger seat. Procedures of disassembly and installation must be followed, the ODS system must be reset and the functionality of SRS checked afterwards.