How to Service the Idle Control Valve on Ford Expedition?

When servicing the Idle Control Valve, take out the bolts and accelerator splash shield, and disconnection of electrical connector, and the valve. To install, reverse instructions, with a new gasket. screw in the bolts to 10 Nm (89 lb-in) and then rotate them another 90 degrees.

How to Service and Repair the Idle Control Valve on Ford Expedition?

In order to service the Idle Control Valve, the battery ground should be disconnected, the accelerator splash shield bolts must be removed and the electrical connector of the valve should also be disconnected. Unscrew the bolts on the valve, and follow the same procedure to screw it back, with a new gasket and tightening the bolts to 10 Nm, and then 90.

OEM Ford Expedition Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Idle Control Valves found

View related parts
Ford Expedition Idle Speed Control Part Number: YL3Z-9F715-AA
$72.82 MSRP: $119.82
You Save: $47.00 (40%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV.; Valve Assembly - Throttle Air By-Pass; Throttle Air Bypass
- Manufacturer Note: Valve asy. (Idle air control) #YL3E 9F715-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2004 Ford Expedition | Eddie Bauer, NBX, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Idle Speed Control Part Number: F65Z-9F715-HA
$71.60 MSRP: $117.82
You Save: $46.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV.; Valve Assembly - Throttle Air By-Pass; Throttle Air Bypass
- Manufacturer Note: SERVICE UNIQUE DESIGN
- Replaces: F65Z-9F715-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2000 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Idle Speed Control Part Number: 2L1Z-9F715-CA
$165.31 MSRP: $272.00
You Save: $106.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly - Throttle Air Bypass; Idle Speed Control Vavle; Idle Air Control Valve; Idle Control Motor; Valve Assembly - Throttle Air By-Pass
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Idle Speed Control Part Number: 2L1Z-9F715-BA
$95.47 MSRP: $157.09
You Save: $61.62 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV.; Valve Assembly - Throttle Air By-Pass; Throttle Air Bypass
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS

Ford Expedition Idle Control Valve

Welcome to our website where you can discover high-quality, genuine Ford Expedition Idle Control Valve. We offer an extensive inventory of OEM Ford Expedition Idle Control Valve at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Expedition Idle Control Valve Parts and Q&A

Idle Speed Control
F65Z-9F715-HA
Q: How to Service the Idle Control Valve on Ford Expedition?
A: When servicing the Idle Control Valve, take out the bolts and accelerator splash shield, and disconnection of electrical connector, and the valve. To install, reverse instructions, with a new gasket. screw in the bolts to 10 Nm (89 lb-in) and then rotate them another 90 degrees.
Idle Speed Control
YL3Z-9F715-AA
Q: How to Service and Repair the Idle Control Valve on Ford Expedition?
A: In order to service the Idle Control Valve, the battery ground should be disconnected, the accelerator splash shield bolts must be removed and the electrical connector of the valve should also be disconnected. Unscrew the bolts on the valve, and follow the same procedure to screw it back, with a new gasket and tightening the bolts to 10 Nm, and then 90.