Make sure this part fits

Ford YL3Z-9F715-AA
Idle Speed Control

Name: Ford YL3Z-9F715-AA
Brand: Ford
SKU: YL3Z-9F715-AA
Price: 72.82 USD
Availability: InStock

1997-2004 Ford YL3Z9F715AA

Customer Questions & Expert Answers (10)

Part Description
Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV.
Base No.
9F715
Manufacturer
Ford

Make sure this part fits

$72.82 MSRP: $119.82

You Save: $47.00 (40%)

ADD TO CART

Vehicle Fitment

Year Make Model	Trim	Engine
1997-2004 Ford Expedition	Eddie Bauer, NBX, XLT, XLT Sport	8 Cyl 5.4 L GAS
1997-2004 Ford F-150	Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2004 Ford F-150 Heritage	XL, XLT	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG
1997-1999 Ford F-250	Base	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2002 Lincoln Blackwood	Base	8 Cyl 5.4 L GAS
2000-2001 Lincoln LS	Base, LSE	6 Cyl 3.0 L GAS
1998-2004 Lincoln Navigator	Base	8 Cyl 5.4 L GAS

Warning: California's Proposition 65

Customer Questions & Expert Answers
Q:
Is YL3Z-9F715-AA the part I need for my vehicle? Posted by FordPartsDeal Specialist
A:
Select Your Vehicle model to verify if part number YL3Z-9F715-AA fits your car.
Posted by FordPartsDeal Specialist
Q:
How to Service the Idle Control Valve on Lincoln LS? Posted by Customer
A:
The first step to service the Idle Control Valve requires disconnecting the battery ground cable. Separate the electrical connector from the Idle Control Valve before you can remove the valve by loosening its securing bolts. Extract the Idle Control Valve from the vehicle then throw away its old gasket. The surfaces where gaskets mate need careful cleaning without Carburetor Tune-up Cleaner D9AZ-19579-BA because the substance that fulfills Ford specifications ESR-M14P9-A and other solvents can cause damage to the valve's interior components. The wiring of the engine control sensor cannot be maintained through cleaning procedures so installation of fresh wiring becomes necessary. The installation begins with a backward removal process while incorporating a brand new gasket.
Posted by FordPartsDeal Specialist
Q:
How to Address Issues with the Idle Control Valve on a Lincoln Navigator? Posted by Customer
A:
Starting Idle Control Valve service and repair requires first you to remove the bolts and the accelerator splash shield. The service starts with disconnecting the Idle Control Valve (ICV) electrical connector followed by removing the ICV valve retaining bolts. The installation process starts with the backwards procedure and includes a new ICV gasket in the final steps. The bolts should be tightened in stages beginning with 10 Nm (89 lb-in) then taking the bolt through another 90-degree rotation.
Posted by FordPartsDeal Specialist
Q:
How to Service and Repair the Idle Control Valve on Lincoln Navigator? Posted by Customer
A:
The first step for the Idle Control Valve service includes disconnecting the battery ground cable. First, remove all bolts from the accelerator splash shield, then disconnect the Idle Control Valve (ICV) electrical connector. The next step involves unbolting the ICV from its position. During installation, please start with the reverse of the removal steps, plus applying a new ICV gasket. Apply two-step tightening procedures to install the bolts by starting at 10 Nm (89 Lb-In), then continuing each bolt by 90 degrees.
Posted by FordPartsDeal Specialist
Q:
How to Service and Repair the Idle Control Valve on Lincoln Blackwood? Posted by Customer
A:
The repair and servicing of Idle Control Valve starts from removing all components in the sequence shown in both illustration and table. The installation requires performing the reversal of the removal process. The Idle Control Valve bolts require two stages of tightening process starting with 10 Nm (89 Lb-In) then continuing an additional 90 degrees.
Posted by FordPartsDeal Specialist
Q:
What is the next step after disconnecting the electrical connector for the 2000 Ford Expedition? Posted by Customer
A:
Remove the two bolts securing the IAC valve.
Posted by FordPartsDeal Specialist
See expert answers on similar Idle Control Valve
Q:
What is the next step after removing the accelerator control splash shield for the 2001 Ford F-150? Posted by Customer
A:
Remove the electrical connector of the Idle Air Control (IAC) valve.
Posted by FordPartsDeal Specialist
See expert answers on similar Idle Control Valve
Q:
What is the first step to service and repair the Idle Air Control Valve for the 2002 Ford Expedition? Posted by Customer
A:
Disconnect the battery ground cable.
Posted by FordPartsDeal Specialist
See expert answers on similar Idle Control Valve
Q:
What is the first step to service the Idle Air Control (IAC) valve for the 2001 Lincoln LS? Posted by Customer
A:
Disconnect the battery ground cable.
Posted by FordPartsDeal Specialist
See expert answers on similar Idle Control Valve
Q:
What is the first step to service and repair the IAC valve for the 2000 Ford F-150? Posted by Customer
A:
Disconnect the electrical connector.
Posted by FordPartsDeal Specialist
See expert answers on similar Idle Control Valve
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Idle Speed Control YL3Z-9F715-AA Designed for Proper Fit and Performance

The Ford part YL3Z-9F715-AA Idle Speed Control as a genuine Ford Idle Control Valve component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford YL3Z-9F715-AA Idle Speed Control is used with Ford F-150, Expedition, F-250 vehicles and Lincoln Navigator, LS, Blackwood models. The original Ford part will bear the manufacturer part number: YL3Z-9F715-AA and where it is made at Ford. It has the code: 9F715.

This component has dimensions of 6.2 x 2.5 x 2.5 inches and its weight is approximately 1.20 Pounds. The part YL3Z9F715AA is available in New condition while meeting the standards of the product rating. The Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV. belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part YL3Z-9F715-AA can be known as Valve Assembly - Throttle Air By-Pass; Throttle Air Bypass. The inventory reference for this item is SKU: YL3Z-9F715-AA. Additional manufacturer-provided details include: Valve asy. (Idle air control) #YL3E 9F715-AA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.

Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.