How to Service and Repair the A/C Condenser Core on Ford Explorer?

A proper repair of the condenser core requires a process of refrigerant recovery. When servicing the condenser core start by removing the air cleaner then the two coolant expansion tank bolts before setting the coolant expansion tank to the side while tightening the tank to 7 Nm (62 lb-in) when reinstalling it. Detach the A/C pressure transducer electrical connector before loosening and disconnecting the condenser inlet fitting while discarding its O-ring and tightening the fitting to 8 Nm (71 lb-in) at installation time. Make the next step to disconnect the condenser outlet fitting by removing its nut then replace the O-ring seal before installation while tightening the fitting to a torque value of 8Nm(71 lb-in). Disconnect the two discharge line clips between the compressor and condenser and remove the cooling module bolts before repositioning the module backward to a torque of 12 Nm (9 lb-ft). Remove the upper radiator air deflector and the two condenser core bolts before reinstallation where torque should be set at 12 Nm (9 lb-ft). First remove the condenser core along with its connected two condenser air deflectors. The installation process should end by reinstalling new O-rings and adding the proper quantity of clean PAG oil through refrigerant system lubrication. Evacuate and perform the leak test and charge the refrigerant system during the final steps.

How to Properly Maintain and Fix an A/C Condenser and What Steps Are Involved for a Ford Explorer?

Service and repair operations on the condenser core start with eliminating the air cleaner as well as upper radiator sight shield. First remove the suction accumulator together with the two A/C fitting nuts and dispose of their existing O-ring seals. After reinstallation check that the nuts achieve 8 Nm (71 lb-in) torque. Proceed by removing the air deflector and after the four radiator bracket bolts and then take out the two radiator brackets. Two condenser bracket bolts along with the two condenser brackets need to be removed. Position the radiator in back of the car to access the condenser core. Installation requires the opposite steps of removal but with new O-ring seals coated in clean mineral oil and correct usage of clean PAG Refrigerant Compressor Oil F7AZ-19589-DA (Motorcraft YN-12-C) or Ford equivalent product WSH-M1C231-B. The final step involves charging the refrigerator system through a leak test while using F73Z-19577-AA (Motorcraft YN-9-A) to lubricate R-134a refrigerant system O-ring seals yet refraining from using this lubricant as an A/C compressor lubricant.

OEM Ford Explorer A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 A/C Condensers found

View related parts
Ford Explorer Condenser Part Number: EB5Z-19712-G
$259.33 MSRP: $421.82
You Save: $162.49 (39%)
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: EB5Z-19712-A, BB5Z-19712-A, YJ-556
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Condenser Part Number: DB5Z-19712-F
$257.09 MSRP: $418.18
You Save: $161.09 (39%)
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: YJ-571, DB5Z-19712-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Explorer | Platinum, Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Condenser Part Number: 8L2Z-19712-AA
$194.01 MSRP: $268.39
You Save: $74.38 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Explorer | Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Condenser Part Number: 2L2Z-19712-BA
$77.05 MSRP: $106.59
You Save: $29.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: Service Kit Contains(1)Condenser,(1)Lower Condenser Bracket,(2)Rubber Mounting Insulators,(1)Instruction Sheet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Explorer | Eddie Bauer, Limited, Postal, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Condenser Part Number: EU2Z-19712-C
$156.04 MSRP: $215.86
You Save: $59.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: 6L2Z-19712-AA, YJ-475
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Condenser Part Number: EB5Z-19712-F
$225.57 MSRP: $374.55
You Save: $148.98 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: DB5Z-19712-E, YJ-569, DB5Z-19712-C, EB5Z-19712-E, YJ-581
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Condenser Part Number: BB5Z-19712-C
$241.82 MSRP: $410.91
You Save: $169.09 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: BB5Z-19712-B, YJ-558
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2019 Ford Explorer | Base, Limited, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Explorer Condenser Part Number: 6L5Z-19712-CB
$238.71 MSRP: $396.36
You Save: $157.65 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: 6L5Z-19712-CA, YL2Z-19712-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford Explorer | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Condenser Part Number: L1MZ-19712-B
$328.36 MSRP: $526.00
You Save: $197.64 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: L1MZ-19712-AD, YJ-741, L1MZ-19712-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Condenser Part Number: F5TZ-19712-A
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: OHV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Explorer | Eddie Bauer, Expedition, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Condenser Part Number: EU2Z-19712-A
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Replaces: 1L2Z-19712-AA, YJ-431
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Condenser Part Number: F87Z-19712-CA
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Condenser Part Number: F4TZ-19712-C
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: R134-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS

Ford Explorer A/C Condenser

OEM A/C Condenser boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Condenser with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The A/C Condenser is one of the major components of car A/C systems and is applied to cool the gaseous refrigerant to the liquid state before it gets to the accumulator on Ford Explorer automobiles. Usually located to face the radiator and comprised of a network of tubes, this fixture is part of the cooling system of automobiles. While there may be variations in types or styles of A/C Condenser used in different Explorer models, the primary goal remains consistent across all iterations: to help in changing the refrigerant from a gas to a liquid so as to allows efficient cooling within the vehicle's air-conditioning system.

Ford Explorer A/C Condenser Parts and Q&A

Condenser
EU2Z-19712-C
Q: How to Service and Repair the A/C Condenser Core on Ford Explorer?
A:
A proper repair of the condenser core requires a process of refrigerant recovery. When servicing the condenser core start by removing the air cleaner then the two coolant expansion tank bolts before setting the coolant expansion tank to the side while tightening the tank to 7 Nm (62 lb-in) when reinstalling it. Detach the A/C pressure transducer electrical connector before loosening and disconnecting the condenser inlet fitting while discarding its O-ring and tightening the fitting to 8 Nm (71 lb-in) at installation time. Make the next step to disconnect the condenser outlet fitting by removing its nut then replace the O-ring seal before installation while tightening the fitting to a torque value of 8Nm(71 lb-in). Disconnect the two discharge line clips between the compressor and condenser and remove the cooling module bolts before repositioning the module backward to a torque of 12 Nm (9 lb-ft). Remove the upper radiator Air Deflector and the two condenser core bolts before reinstallation where torque should be set at 12 Nm (9 lb-ft). First remove the condenser core along with its connected two condenser air deflectors. The installation process should end by reinstalling new O-rings and adding the proper quantity of clean PAG oil through refrigerant system lubrication. Evacuate and perform the leak test and charge the refrigerant system during the final steps.
Condenser
EU2Z-19712-A
Q: How to Properly Maintain and Fix an A/C Condenser and What Steps Are Involved for a Ford Explorer?
A:
Service and repair operations on the condenser core start with eliminating the air cleaner as well as upper Radiator sight shield. First remove the suction accumulator together with the two A/C fitting nuts and dispose of their existing O-ring seals. After reinstallation check that the nuts achieve 8 Nm (71 lb-in) torque. Proceed by removing the Air Deflector and after the four radiator bracket bolts and then take out the two radiator brackets. Two condenser bracket bolts along with the two condenser brackets need to be removed. Position the radiator in back of the car to access the condenser core. Installation requires the opposite steps of removal but with new O-ring seals coated in clean mineral oil and correct usage of clean PAG Refrigerant Compressor Oil F7AZ-19589-DA (Motorcraft YN-12-C) or Ford equivalent product WSH-M1C231-B. The final step involves charging the refrigerator system through a leak test while using F73Z-19577-AA (Motorcraft YN-9-A) to lubricate R-134a refrigerant system O-ring seals yet refraining from using this lubricant as an A/C compressor lubricant.