How to Service the Rear Brake Line Flexible Hose on Ford Explorer?

Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.

How to Service and Repair the Front Brake Line Flexible Hose on Ford Explorer?

The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.

OEM Ford Explorer Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Brake Lines found

View related parts
Ford Explorer Flex Hose, Front Driver Side Part Number: 8L5Z-2078-L
$30.23 MSRP: $48.00
You Save: $17.77 (38%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7L5Z-2078-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Flex Hose, Center Part Number: 6L5Z-2282-AA
$30.79 MSRP: $47.64
You Save: $16.85 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Center; Brake Hose; Brake Line; Hose; Hydraulic Hose
- Position: Center
- Replaces: F57Z-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Flex Hose, Front Passenger Side Part Number: 8L5Z-2078-R
$30.24 MSRP: $49.09
You Save: $18.85 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 7L5Z-2078-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2001 Ford Explorer | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Flex Hose, Front Driver Side Part Number: FB5Z-2078-A
$24.85 MSRP: $39.45
You Save: $14.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: DB5Z-2078-A, BRHF-124, DB5Z-2078-E, CB5Z-2078-B, DB5Z-2078-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Flex Hose, Front Passenger Side Part Number: L1MZ-2078-H
$69.04 MSRP: $109.64
You Save: $40.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Flex Hose, Driver Side Part Number: L1MZ-2282-B
$55.07 MSRP: $87.45
You Save: $32.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaced by: L1MZ-2282-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Flex Hose, Front Passenger Side Part Number: DB5Z-2078-F
$45.23 MSRP: $71.82
You Save: $26.59 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: Service Part May Differ From Production
- Position: Front Passenger Side
- Replaces: BRHF-59, DB5Z-2078-B, DB5Z-2078-D, CB5Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Flex Hose, Passenger Side Part Number: L1MZ-2282-A
$54.03 MSRP: $90.55
You Save: $36.52 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: L1MZ-2282-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Flex Hose, Passenger Side Part Number: 1L2Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Rear Driver Side Part Number: 2C5Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Brake Hose, Front Driver Side Part Number: 4L2Z-2078-AB
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Line; Front Flex Hose; Brake Hydraulic Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 1L2Z-2078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Front Driver Side Part Number: 6L2Z-2078-C
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Rear Passenger Side Part Number: 6L2Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6L2Z-2282-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Rear Driver Side Part Number: 6L2Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6L2Z-2282-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2010 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Front Driver Side Part Number: F3TZ-2078-D
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Brake Tube Part Number: 1L2Z-2N050-AA
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hydraulic Line; Brake Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Flex Hose, Driver Side Part Number: F1TZ2078B
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Flex Hose, Passenger Side Part Number: F3TZ-2078-C
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Explorer | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Flex Hose, Rear Driver Side Part Number: F67Z-2282-BA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2001 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Flex Hose, Rear Passenger Side Part Number: XL2Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: RH, Postal vehicle
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001, 1995 Ford Explorer | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Ford Explorer Brake Line

OEM Brake Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Line with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Explorer Brake Line is one of those parts that help in transferring brake fluid from the master cylinder to the brake caliper pistons to make the hydraulic brake work. Metal brake lines are vulnerable to corrosion as well as impact forces which in one way or the other may cause fluid leaks, loss of the hydraulic pressure. Rubber brake hoses also can be damaged physically and internally, which will, in turn, have negative implications for brakes. If replacement is required, there are pre-bend brake line kit and the corrosion resistant stainless steel hoses that can be fitted easily. One can even and upgrade to a braided stainless steel hoses to get improved a feel of the pedals as well as better responsiveness particularly for performance driving conditions.

Ford Explorer Brake Line Parts and Q&A

Flex Hose, Rear Driver Side
6L2Z-2282-B
Q: How to Service the Rear Brake Line Flexible Hose on Ford Explorer?
A:
Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.
Flex Hose, Front Driver Side
6L2Z-2078-C
Q: How to Service and Repair the Front Brake Line Flexible Hose on Ford Explorer?
A:
The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.