Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
Other Name: Latch; Body Control Module; Door Latch Assembly; Door Lock; Latch Assembly; Lock
Position: Passenger Side
Replaces: 3L2Z-78219A64-AB, 3L2Z-78219A64-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2002-2003 Ford Explorer | Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
| Page 1 of 3 |Next >
1-20 of 46 Results
Ford Explorer Door Latch Assembly
Welcome to our website where you can discover high-quality, genuine Ford Explorer Door Latch Assembly. We offer an extensive inventory of OEM Ford Explorer Door Latch Assembly at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Service the Rear Door Latch Assembly on Ford Explorer?
A: Removal of the watershield and trim panel is required in order to service the rear door latch. Press the lock lever rod, loosen the interior handle screw and disconnect the door ajar and lock actuator connector. Take out the latch screws, install them with a tightening of 12 Nm (9 lb-ft) then lubricate the latch after installation.
Q: How to remove and replace the rear Door Latch Assembly on Ford Explorer?
A: In order to change the rear door latch, take away the trim panel and watershield. Unconnect the interior handle cable, exterior handle rod, and electrical connectors. Installation The three latch screws should be removed, and clamped to 12 Nm (106 lb-in). Push button rod is released and the steps to remove it are reversed to complete.