How to Service and Repair a Front Seat Cushion on Ford Explorer?

The front seat cushion must always require safety glasses for work on vehicles with a SRS air bag supplemental restraint system (SRS) and air bag modules or safety belt pretensioners to prevent possible injuries. Always depower the SRS safety system before starting work and check that the SRS operates correctly without any faults before giving the vehicle back to the customer. Rulers show a loose or rocking front seat so the symptom chart must be checked for "power seat moves but is loose" before part replacement. The first step involves moving the front seat forward to reach the four mounting bolts before uninstalling the seat. First remove the recliner handle along with attached clip from the recliner if it is equipped, next access and remove the seat backrest recliner lever and lumbar control knob. Start by removing screws that belong to the lumbar adjust mechanism and rear trim and lower trim while disconnecting the side trim front retaining clip. You should extract the lumbar mechanism slightly forward while unclipping the side trim bracket without damaging the mounting tabs. Disconnect the electrical connector of the seat control switch and heated seat switch before taking out the seat side trim panel. Detach the pretensioner from the seat by first removing its two safety belt pretensioner bolts. Lift the seat cushion from the seat frame while disconnecting applicable seat heater mat electrical connectors after releasing the back of seat cushion hook and loop fasteners and seat cushion cover J-clip attachments. Installation starts with connecting the electrical connectors of the seat heater mat followed by putting the seat cushion onto the frame where you will attach J-clips and hook and loop fasteners. Fasten the safety belt buckle pretensioner using two bolts tightened to 40 Nm (30 lb-ft) while keeping the switch harness properly directed. Rejoin the seat control switch together with heated seat switch before placing the side trim panel and securing its front retaining clip while being cautious of potential mounting tab damage. Put the lower mounting screw and rear mounting screw on the side trim panel along with the lumbar adjust mechanism screws. Reinstall the front seat followed by a repower of the SRS system after attaching the recliner handle clip and seating the lumbar control knob and seat backrest recliner handle.

How to remove and replace the third row seat cushion on Ford Explorer?

The procedure to remove third row seat cushions begins with positioning the backrest upright before removing the seat from the vehicle. You must position the backrest in an upward direction to access two bolts. Start with the latch-to-cushion frame bolt and the hinge-to-cushion frame bolt before removal. During installation of the third row seat padding you must torque these bolts to 25 Nm (18 lb-ft). Moving to under the cushion frame front section, use the studs to free the cushion trim cover allowing access to the two cushion pivot link assembly-to-cushion frame nuts. Unscrew the two mentioned nuts to separate the cushion assembly and fasten them back to 22 Nm (16 lb-ft) torque. Finish the installation by performing an inverse procedure of removal.

OEM Ford Explorer Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

121 Seat Cushions found

View related parts
Ford Explorer Seat Cushion Pad, Front Driver Side Part Number: BB5Z-78632A22-J
$216.57 MSRP: $318.02
You Save: $101.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Cushion Pad, Front Left; Seat Cushion
- Manufacturer Note: Heat Element Included
- Position: Front Driver Side
- Replaces: BB5Z-78632A23-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Ford Explorer | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Back Pad, Front Driver Side Part Number: BB5Z-78632A22-H
$261.52 MSRP: $384.02
You Save: $122.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Front Left
- Manufacturer Note: Heat Element Included
- Position: Front Driver Side
- Replaces: BB5Z-7864811-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Ford Explorer | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Back Pad, Front Passenger Side Part Number: FB5Z-7864810-K
$98.91 MSRP: $194.37
You Save: $95.46 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Back Cushion, Front Right
- Position: Front Passenger Side
- Replaces: FB5Z-7864810-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Rear Center Driver Side Part Number: FB5Z-7863841-D
$147.65 MSRP: $214.92
You Save: $67.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center Left
- Manufacturer Note: Heat Element Not Included
- Position: Rear Center Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Rear Passenger Side Part Number: BB5Z-7863840-B
$95.23 MSRP: $131.74
You Save: $36.51 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Ford Explorer | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Rear Driver Side Part Number: LB5Z-7863841-F
$78.63 MSRP: $114.45
You Save: $35.82 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear Driver Side
- Replaces: LB5Z-7863841-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Rear Center Passenger Side Part Number: LB5Z-7863840-A
$83.28 MSRP: $133.73
You Save: $50.45 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center Right
- Position: Rear Center Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Back Pad, Rear Center Part Number: LB5Z-7866800-E
$151.92 MSRP: $243.97
You Save: $92.05 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Back; Seat Back Cushion, Center
- Position: Rear Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Front Driver Side Part Number: LB5Z-78632A23-V
$287.88 MSRP: $448.42
You Save: $160.54 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Front Passenger Side Part Number: LB5Z-78632A22-W
$1451.71 MSRP: $2150.68
You Save: $698.97 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Position: Front Passenger Side
- Replaces: LB5Z-78632A22-K, LB5Z-78632A22-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Front Driver Side Part Number: HB5Z-78632A23-C
$86.33 MSRP: $138.62
You Save: $52.29 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Left; Seat Cushion
- Manufacturer Note: Heat Element Not Included
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Back Pad, Rear Passenger Side Part Number: BB5Z-7866800-C
$178.20 MSRP: $275.00
You Save: $96.80 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Back; Seat Back Cushion, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Back Pad, Rear Passenger Side Part Number: BB5Z-7866800-D
$189.01 MSRP: $275.12
You Save: $86.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Back; Seat Back Cushion, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Back Pad, Rear Driver Side Part Number: BB5Z-7866801-B
$110.67 MSRP: $177.68
You Save: $67.01 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Back; Seat Back Cushion, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Front Passenger Side Part Number: HB5Z-78632A22-D
$1033.71 MSRP: $1531.42
You Save: $497.71 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Passenger Side Part Number: LB5Z-78632A22-T
$1341.87 MSRP: $1987.95
You Save: $646.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion
- Position: Passenger Side
- Replaces: LB5Z-78632A22-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Front Driver Side Part Number: LB5Z-78632A23-T
$306.68 MSRP: $450.33
You Save: $143.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Front Passenger Side Part Number: LB5Z-78632A22-M
$979.20 MSRP: $1450.67
You Save: $471.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Seat Cushion Pad, Front Passenger Side Part Number: FB5Z-78632A22-B
$1387.40 MSRP: $2055.40
You Save: $668.00 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Manufacturer Note: Includes Seat Pad And Occupant Weight Sensor
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2017 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Seat Cushion Pad, Front Passenger Side Part Number: LB5Z-78632A22-S
$1242.82 MSRP: $1841.22
You Save: $598.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Position: Front Passenger Side
- Replaces: LB5Z-78632A22-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

| Page 1 of 7 |Next >

1-20 of 121 Results

Ford Explorer Seat Cushion

OEM Seat Cushion boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cushion with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Explorer Seat Cushion is another part that is considered essential and plays the role of improving the structure of the seat with the purpose of providing comfort for the drivers and passengers, especially when on the move for several hours. Established for its sturdiness and effectiveness, Ford Seat Cushion provides solutions to questions of discomfort including back pain and sores that may result from too much sitting. Existing in different designs, beaded and sheepskin models are launched, the Ford Explorer Seat Cushion helps with the proper blood circulation and temperature management during the drive. Due to this flexibility in model, it can be fitted in various Ford Explorer models, hence helping the owners across generations to benefit from upgraded efficiency and safety features. High-quality seat cushions are becoming standard features of this model since 1991; the Ford Explorer is one of the most demanded cars of our days, and the addition of drivers' and passengers' comfort indications the company's concern with clients' well-being. The beaded seat cushion besides having a massaging effect, provides for air to circulate through the beads if the cushion is made from material such as foam while the sheepskin cushion is able to absorb moisture taking the comfort of its users to another level. The above features define the Ford Explorer Seat Cushion's performance, and set it apart from other similar models. Due to ergonomic design and practical utility, the Ford Explorer Seat Cushion should be considered as one of the crucial additions to the car's interior to any owner of an Explorer who strives to enhance the comfort and safety of the car for their family SCC, thus emphasizing the main advantages of the car as a powerful off-road vehicle for families.

Ford Explorer Seat Cushion Parts and Q&A

Seat Cushion Pad, Front
3L2Z-78632A22-AA
Q: How to Service and Repair a Front Seat Cushion on Ford Explorer?
A:
The front seat cushion must always require safety glasses for work on vehicles with a SRS Air Bag supplemental restraint system (SRS) and air bag modules or safety belt pretensioners to prevent possible injuries. Always depower the SRS safety system before starting work and check that the SRS operates correctly without any faults before giving the vehicle back to the customer. Rulers show a loose or rocking front seat so the symptom chart must be checked for "power seat moves but is loose" before part replacement. The first step involves moving the front seat forward to reach the four mounting bolts before uninstalling the seat. First remove the recliner handle along with attached clip from the recliner if it is equipped, next access and remove the seat backrest recliner lever and lumbar control knob. Start by removing screws that belong to the lumbar adjust mechanism and rear trim and lower trim while disconnecting the side trim front retaining clip. You should extract the lumbar mechanism slightly forward while unclipping the side trim bracket without damaging the mounting tabs. Disconnect the electrical connector of the seat control switch and heated Seat Switch before taking out the seat side trim panel. Detach the pretensioner from the seat by first removing its two safety belt pretensioner bolts. Lift the seat cushion from the seat frame while disconnecting applicable seat heater mat electrical connectors after releasing the back of seat cushion hook and loop fasteners and seat cushion cover J-clip attachments. Installation starts with connecting the electrical connectors of the seat heater mat followed by putting the seat cushion onto the frame where you will attach J-clips and hook and loop fasteners. Fasten the safety belt buckle pretensioner using two bolts tightened to 40 Nm (30 lb-ft) while keeping the switch harness properly directed. Rejoin the seat control switch together with heated seat switch before placing the side trim panel and securing its front retaining clip while being cautious of potential mounting tab damage. Put the lower mounting screw and rear mounting screw on the side trim panel along with the lumbar adjust mechanism screws. Reinstall the front seat followed by a repower of the SRS system after attaching the recliner handle clip and seating the lumbar control knob and seat backrest recliner handle.
Seat Cushion, Rear Driver Side
6L2Z-7863841-BA
Q: How to remove and replace the third row seat cushion on Ford Explorer?
A:
The procedure to remove third row seat cushions begins with positioning the backrest upright before removing the seat from the vehicle. You must position the backrest in an upward direction to access two bolts. Start with the latch-to-cushion frame bolt and the hinge-to-cushion frame bolt before removal. During installation of the third row seat padding you must torque these bolts to 25 Nm (18 lb-ft). Moving to under the cushion frame front section, use the studs to free the cushion trim cover allowing access to the two cushion pivot link assembly-to-cushion frame nuts. Unscrew the two mentioned nuts to separate the cushion assembly and fasten them back to 22 Nm (16 lb-ft) torque. Finish the installation by performing an inverse procedure of removal.