How to Service and Repair the EGR Valve System Module on Ford Explorer Sport Trac?

The EGR system module service requires disconnecting electrical vacuum connectors and upper exhaust manifold after removing the EGR system module-to-exhaust manifold tube. This should be tightened to 40 Nm (30 lb-ft) before reinstallation. Start by placing the new EGR module gasket with its raised circle side toward the intake manifold before you remove all the bolts, the EGR system module along with the gasket which you should discard. Use a new EGR system module gasket for sealing the cleaned surfaces first before following the installation procedure and tightening the gasket to 25 Nm (18 lb-ft).

OEM Ford Explorer Sport Trac EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 EGR Valves found

View related parts
Ford Explorer Sport Trac EGR Valve Part Number: XC2Z-9D475-AB
$54.32 MSRP: $87.64
You Save: $33.32 (39%)
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: XC2Z-9D475-AA, F7UZ-9D475-A4A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac EGR Valve Part Number: F77Z-9D475-F2A
$75.70 MSRP: $127.09
You Save: $51.39 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport Trac | Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac EGR Valve Part Number: 5L2Z-9D475-A
$141.98 MSRP: $225.45
You Save: $83.47 (38%)
Product Specifications
- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 4L2Z-9D475-A, 4L2Z-9D475-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS

Ford Explorer Sport Trac EGR Valve

OEM EGR Valve boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get EGR Valve with long life and a perfect fit. Come to our website and find genuine Ford Explorer Sport Trac parts. We keep a wide inventory of OEM Explorer Sport Trac parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The EGR Valve in Ford Explorer Sport Trac vehicles regulates the amount of exhaust gases that flow back into the combustion chamber and thus pollutants emissions into the air. This technique reduces the amount of O2 present and adds low reactivity gases to reduce the peak temperature and prevent the formation of NOx. Since the earliest application of EGR in form of crude jets to the present highly developed valves commanded by engine conditions, improvement in EGR flow has been experienced. Although certain new engines do not need EGR, it is still needed to adhere to emission requirements and to attain the balance between efficiency and lesser NOx emission. Deregulation of maintenance is important to ensure that carbon accumulates do not form a layer on the EGR valve.

Ford Explorer Sport Trac EGR Valve Parts and Q&A

EGR Valve
5L2Z-9D475-A
Q: How to Service and Repair the EGR Valve System Module on Ford Explorer Sport Trac?
A:
The EGR system module service requires disconnecting electrical vacuum connectors and upper exhaust manifold after removing the EGR system module-to-exhaust manifold tube. This should be tightened to 40 Nm (30 lb-ft) before reinstallation. Start by placing the new EGR module gasket with its raised circle side toward the Intake Manifold before you remove all the bolts, the EGR system module along with the gasket which you should discard. Use a new EGR system module gasket for sealing the cleaned surfaces first before following the installation procedure and tightening the gasket to 25 Nm (18 lb-ft).