How to Service and Repair the Motor and Transmission Mount on Ford Explorer Sport Trac?

Service operations on the transmission mount must start when the vehicle sits in neutral position on a hoist. A 4x2 vehicle requires marking the rear driveshaft yoke and axle flange for driveshaft balance before running the driveshaft by unbolting it and extracting the assembly. Begin by removing transmission mount nuts and afterward support the transmission by elevating it. You must detach the transmission mount through removal of its screws. Set the new transmission mount onto the extension housing extension and fasten it using the mount-to-extension housing screws. The next step requires to place the transmission mount inside the crossmember and use a wrench on the mounting nuts. Testing the rear driveshaft balance by matching it with the previously established marks then proceed with bolt installation.

OEM Ford Explorer Sport Trac Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Motor And Transmission Mounts found

View related parts
Ford Explorer Sport Trac Motor Mount, Driver Side Part Number: 7A2Z-6038-CA
$74.11 MSRP: $91.67
You Save: $17.56 (20%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: 7A2Z-6038-C, 7A2Z-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount Bracket, Driver Side Part Number: 7A2Z-6031-AA
$17.30 MSRP: $23.54
You Save: $6.24 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount, Passenger Side Part Number: 7A2Z-6038-D
$70.30 MSRP: $102.33
You Save: $32.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: 5L2Z-6038-AD, 7A2Z-6038-B, 5L2Z-6038-BB, 5L2Z-6038-AB, 6L2Z-6038-AB, 5L2Z-6038-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount, Driver Side Part Number: 6L2Z-6031-BA
$28.44 MSRP: $39.34
You Save: $10.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount Bracket; Front Mount; Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: 7A2Z-6031-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Mount Bracket, Driver Side Part Number: F87Z-6031-FA
$59.45 MSRP: $86.53
You Save: $27.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Motor Mount Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: F77Z-6031-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: 9L2Z-6068-A
$82.77 MSRP: $114.51
You Save: $31.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford Explorer Sport Trac | Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount Bracket, Passenger Side Part Number: 5L2Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 7A2Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Support Bar Part Number: F87Z-6A023-BA
Product Specifications
- Other Name: Support; Transmission Crossmember; Engine Mount Torque Strut; Motor Mount; Rear Support
- Manufacturer Note: Kit includes all attaching hardware - hardware not available separately, with front torsion bar suspension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: F87Z-6068-KA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: 8L2Z-6068-B
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Transmission Mounts; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Replaces: 6L2Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Mount Bracket, Passenger Side Part Number: 3L5Z-6030-JA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Motor Mount Bracket; Engine Mount Bracket
- Position: Passenger Side
- Replaces: F5TZ-6030-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: F5TZ-6068-A
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator
- Replaces: E5TZ-6068-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Trans Crossmember Part Number: 6L2Z-6A023-AB
Product Specifications
- Other Name: Support; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Motor Mount; Rear Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount Bracket, Passenger Side Part Number: 6L2Z-6030-AA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount, Passenger Side Part Number: 3L2Z-6038-BB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: F5TZ-6038-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Motor Mount, Driver Side Part Number: 3L2Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount, Left; Engine Mount Bracket; Front Mount; Insulator Assembly - Engine Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: 8L2Z-6068-A
$33.37 MSRP: $47.33
You Save: $13.96 (30%)
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 7A2Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Transmission Mount Part Number: 8L2Z-6068-C
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Replaces: 6L2Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Explorer Sport Trac | Limited, XLT | 8 Cyl 4.6 L GAS

Ford Explorer Sport Trac Motor And Transmission Mount

OEM Motor And Transmission Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Motor And Transmission Mount with long life and a perfect fit. Come to our website and find genuine Ford Explorer Sport Trac parts. We keep a wide inventory of OEM Explorer Sport Trac parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Motor And Transmission Mount in Ford Explorer Sport Trac vehicles has the responsibility of having the transmission firmly fixed while at the same time protecting it from the vibrations that emanate from the engine. This component is very much required to help sustain the structure and capability of the drive train of the vehicle. Once again based on the specific type of the transmission it is possible to have one or more Motor And Transmission Mounts on Ford Explorer Sport Trac. Thus the Motor And Transmission Mounts for the Ford Explorer Sport Trac have evolved with different designs being incorporated in the vehicle over the years depending on their performance of the model. The primary function of these mounts remains consistent: to help and to reduce the vibrations and roughness so that the driver feel comfortable while driving. It is critical to determine whether the variations are with reference to the construction materials or the design then identifying how the varied types of exhausts will perform in the lineup of Ford Explorer Sport Trac.

Ford Explorer Sport Trac Motor And Transmission Mount Parts and Q&A

Motor Mount, Passenger Side
3L2Z-6038-BB
Q: How to Service and Repair the Motor and Transmission Mount on Ford Explorer Sport Trac?
A:
Service operations on the transmission mount must start when the vehicle sits in neutral position on a hoist. A 4x2 vehicle requires marking the rear driveshaft yoke and axle flange for driveshaft balance before running the driveshaft by unbolting it and extracting the assembly. Begin by removing transmission mount nuts and afterward support the transmission by elevating it. You must detach the transmission mount through removal of its screws. Set the new transmission mount onto the extension housing extension and fasten it using the mount-to-extension housing screws. The next step requires to place the transmission mount inside the crossmember and use a wrench on the mounting nuts. Testing the rear driveshaft balance by matching it with the previously established marks then proceed with bolt installation.