How to service and repair the steering angle sensor on Ford Explorer Sport Trac?

The service process for the steering angle sensor starts with removing all three bolts controlling the lower steering column cover together with the attached cover. After you have removed the three lower steering column cover bolts start the process of removing the upper steering column cover. Remove the two securing bolts on the steering wheel rotation sensor by disconnecting its electrical connector and pull out the complete sensor unit. The installation completion requires performing all steps in reverse order from removal.

OEM Ford Explorer Sport Trac Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
Ford Explorer Sport Trac Angle Sensor
Part Number: 6L2Z-3F818-AA
$138.98 MSRP: $202.30
You Save: $63.32 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Steering Rotation; Wheel Position, Yaw, Speed, and Angle Sensors.; Steering Sensor Assembly; Sensor
- Manufacturer Note: Steering Angle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

Ford Explorer Sport Trac Steering Angle Sensor

Welcome to our website where you can discover high-quality, genuine Ford Explorer Sport Trac Steering Angle Sensor. We offer an extensive inventory of OEM Ford Explorer Sport Trac Steering Angle Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Explorer Sport Trac Steering Angle Sensor Parts Questions & Experts Answers

Angle Sensor
6L2Z-3F818-AA
Q: How to service and repair the steering angle sensor on Ford Explorer Sport Trac?
A: The service process for the steering angle sensor starts with removing all three bolts controlling the lower Steering Column Cover together with the attached cover. After you have removed the three lower steering column cover bolts start the process of removing the upper steering column cover. Remove the two securing bolts on the steering wheel rotation sensor by disconnecting its electrical connector and pull out the complete sensor unit. The installation completion requires performing all steps in reverse order from removal.