OEM Ford F-150 Brake Pedal

Ford F-150 Brake Pedal Parts and Q&A

• Pedal Assembly
  3L2Z-2455-AA
  Q: How to service and repair the adjustable brake pedal assembly on Ford F-150?

  A:

  The service and repair of the adjustable brake pedal assembly begins with placing both pedals at the same spot either at the frontmost position or at the very back. Service on the adjustable brake pedal assembly requires you to start by disconnecting the battery ground cable followed by removing the instrument panel opening cover. You should remove the stoplight switch hairpin clip before sliding out the stoplight switch together with the booster push rod and bushing from the brake pedal pin. Begin service of the adjustable brake pedal assembly by detaching the brake pedal cable from the accelerator pedal then disconnecting the brake pedal motor electrical connection. Unload the pedal spring before removing both bolts and the nut that secure the brake pedal to extraction. Begin by placing the brake pedal while verifying that bushings rest at the end of the pivot tube and subsequently install the brake pedal bolt followed by the nut. Install the pedal spring before you reconnect the brake pedal motor electrical connector. Make the brake pedal-to-accelerator pedal cable connection at the accelerator pedal while both pedals remain in sync after using the brake pedal motor to set the position. Before connecting the cable for a new accelerator pedal installation you must move the brake pedal to its correct position. The brake pedal installation process requires the sequential attachment of stoplight switch and booster push rod elements on the brake pedal pin and completion with securing of the hairpin clip and instrument panel opening cover.