How to service and repair the exhaust manifold on all on Ford F-150 Heritage?

All vehicles need their exhaust manifold serviced by first being positioned in the NEUTRAL gear on a hoist. The service process begins with removing the front wheel opening molding in addition to the front fender splash shield when working with 4x4 vehicles. The Romeo engine service requires the removal of a brake booster vacuum hose nut along with its bracket before disconnecting differential pressure feedback EGR sensor tubes from an EGR valve tube and removing exhaust manifold connection to EGR valve tube. Installments for the Windsor engine (5.4L) include removing the bolt followed by brake booster vacuum hose and bracket detachment then disconnecting the differential pressure feedback EGR system hoses and the upper and lower exhaust manifold to EGR valve tube fittings. The process begins by taking out the nuts and exhaust manifold while wasting the exhaust manifold gasket before cleaning and checking the exhaust manifold. The new exhaust manifold gasket needs to be positioned first with exhaust manifold installation taking place second before fully tightening nuts according to their required sequence. Attach the three-way catalytic converter to manifold nuts. The installation of the exhaust manifold-to-EGR valve tube requires hand tightening of the fittings before proceeding to tighten both upper and lower fittings. The differential pressure feedback EGR sensor hoses should connect to the EGR valve tube followed by installation of the brake booster vacuum hose along with its bracket and tightener. Windsor engine owners should replicate the installation of exhaust manifold-to-EGR valve tube followed by attaching brake booster vacuum hose and its bracket with bolt. As the last step replace the front fender splash shield followed by installation of the front wheel opening moldings for 4x4 vehicles.

OEM Ford F-150 Heritage Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Exhaust Manifolds found

View related parts
Ford F-150 Heritage Exhaust Manifold, Passenger Side
Part Number: XL3Z-9430-GA
$69.50 MSRP: $101.17
You Save: $31.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | SVT Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Driver Side
Part Number: 7L1Z-9431-A
$121.37 MSRP: $176.67
You Save: $55.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | SVT Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Driver Side
Part Number: XL3Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH - Includes F65Z-9F485-AA connector.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Passenger Side
Part Number: 5L3Z-9430-AA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: XL3Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 6 Cyl 4.2 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Driver Side
Part Number: 2L1Z-9431-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH. Includes EGR fitting XL3E-9F485-AA, With EGR valve
- Position: Driver Side
- Replaces: XL3Z-9431-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | SVT Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Passenger Side
Part Number: XL3Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold
Part Number: 7C3Z-9430-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | SVT Lightning, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Driver Side
Part Number: 5L3Z-9431-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: XL3Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 6 Cyl 4.2 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Driver Side
Part Number: 2L1Z-9431-DA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford F-150 Heritage Exhaust Manifold, Passenger Side
Part Number: 9L3Z-9430-E
$113.24 MSRP: $164.83
You Save: $51.59 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 4L1Z-9430-A, 9L3Z-9430-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F-150 Heritage | XL, XLT | 8 Cyl 4.6 L GAS

Ford F-150 Heritage Exhaust Manifold

Welcome to our website where you can discover high-quality, genuine Ford F-150 Heritage Exhaust Manifold. We offer an extensive inventory of OEM Ford F-150 Heritage Exhaust Manifold at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford F-150 Heritage Exhaust Manifold Parts Questions & Experts Answers

Exhaust Manifold, Driver Side
7L1Z-9431-A
Q: How to service and repair the exhaust manifold on all on Ford F-150 Heritage?
A: All vehicles need their exhaust manifold serviced by first being positioned in the NEUTRAL gear on a hoist. The service process begins with removing the front wheel opening molding in addition to the front fender splash shield when working with 4x4 vehicles. The Romeo engine service requires the removal of a brake booster vacuum hose nut along with its bracket before disconnecting differential pressure feedback EGR sensor tubes from an EGR valve tube and removing exhaust manifold connection to EGR valve tube. Installments for the Windsor engine (5.4L) include removing the bolt followed by brake booster vacuum hose and bracket detachment then disconnecting the differential pressure feedback EGR system hoses and the upper and lower exhaust manifold to EGR valve tube fittings. The process begins by taking out the nuts and exhaust manifold while wasting the exhaust manifold gasket before cleaning and checking the exhaust manifold. The new exhaust manifold gasket needs to be positioned first with exhaust manifold installation taking place second before fully tightening nuts according to their required sequence. Attach the three-way catalytic converter to manifold nuts. The installation of the exhaust manifold-to-EGR valve tube requires hand tightening of the fittings before proceeding to tighten both upper and lower fittings. The differential pressure feedback EGR sensor hoses should connect to the EGR valve tube followed by installation of the brake booster vacuum hose along with its bracket and tightener. Windsor engine owners should replicate the installation of exhaust manifold-to-EGR valve tube followed by attaching brake booster vacuum hose and its bracket with bolt. As the last step replace the front fender splash shield followed by installation of the front wheel opening moldings for 4x4 vehicles.