How to Service and Repair the Axle Shaft in a 10.50-Inch Ring Gear Axle Assembly on Ford F-250 Super Duty?

You must begin your work on a Ford 10.50-Inch Ring Gear axle assembly by first removing the wheels and tires and secondly removing the drive pinion. Start the procedure by detaching the rear anti-lock brake sensor before taking out the nuts and stone shield. You should first remove the caliper pin bolts before taking out the rear disc brake caliper. The service needs a secondary person to stretch both the parking brake cable and conduit until they reach their maximum possible length for inserting a suitable holding device. The parking brake cable demands disconnecting at its parking brake lever and handling the cable clamp bolt's removal followed by unclipping the brake line. The retainer should next be taken out from the parking brake cable bracket before relocating the cable to a separate area. The brake hose bracket bolt needs to be removed before disconnecting the vent hose at the brake hose junction block. The brake junction block from the rear axle housing must be removed before it hangs free in the air and this process should be followed by unfastening the brake lines from the rear axle housing tie strap while keeping them attached to the disc brake calipers. The axle requires proper support from a transmission jack which the technician should attach securely before beginning to unscrew bolts and nuts from the lower shock absorbers. Vacate the space in front of the differential housing by repositioning the sway bar forward while using a wrench to slowen both links at their lower stabilize bar ends. Disable the stabilizer bar operation by removing both retainer-to-axle brackets together with their stabilizer bar retainers followed by stabilizer bar mounting brackets and U-bolts and allowing the stabilizer bar to dangle freely. Lower the axle from the vehicle after correctly removing the rear spring plate U-bolts and nuts which must be replaced. Place the sway bar in front of the differential housing and then reinstall in the opposite order of removal steps.

OEM Ford F-250 Super Duty Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Axle Shafts found

View related parts
Ford F-250 Super Duty Axle Shaft, Front Driver Side Part Number: EC3Z-3220-D
$414.50 MSRP: $608.67
You Save: $194.17 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Left; Axle Assembly
- Position: Front Driver Side
- Replaces: BC3Z-3220-B, EC3Z-3220-B, AC3Z-3220-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: 8C3Z-4234-D
$277.17 MSRP: $407.00
You Save: $129.83 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Front Passenger Side Part Number: EC3Z-3219-D
$448.21 MSRP: $658.17
You Save: $209.96 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Assembly
- Position: Front Passenger Side
- Replaces: AC3Z-3219-C, EC3Z-3219-B, 5C3Z-3219-BB, 8C3Z-3219-B, BC3Z-3219-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Front Driver Side Part Number: 4C3Z-3220-BA
$410.76 MSRP: $603.17
You Save: $192.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Driver Side
- Replaces: 3C3Z-3220-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Front Passenger Side Part Number: 4C3Z-3219-BA
$454.45 MSRP: $667.33
You Save: $212.88 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-3219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shafts, Rear Part Number: PC3Z-4234-L
$320.86 MSRP: $471.17
You Save: $150.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Front Passenger Side Part Number: 4C3Z-3219-AA
$478.18 MSRP: $702.17
You Save: $223.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle
- Position: Front Passenger Side
- Replaces: 3C3Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Passenger Side Part Number: PC3Z-4234-J
$288.37 MSRP: $449.17
You Save: $160.80 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: PC3Z-4234-K
$309.63 MSRP: $454.67
You Save: $145.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Passenger Side Part Number: PC3Z-4234-B
$278.42 MSRP: $408.83
You Save: $130.41 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Passenger Side Part Number: PC3Z-4234-F
$292.15 MSRP: $429.00
You Save: $136.85 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: HC3Z-4234-D
$285.91 MSRP: $419.83
You Save: $133.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: PC3Z-4234-E
$262.19 MSRP: $385.00
You Save: $122.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shafts, Rear Part Number: PC3Z-4234-M
$324.61 MSRP: $476.67
You Save: $152.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: PC3Z-4234-A
$279.66 MSRP: $410.67
You Save: $131.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Passenger Side Part Number: 8C3Z-4234-C
$272.17 MSRP: $399.67
You Save: $127.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shafts
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Front Driver Side Part Number: 4C3Z-3220-AA
$374.55 MSRP: $550.00
You Save: $175.45 (32%)
Product Specifications
- Other Name: Shaft - Front Axle
- Position: Front Driver Side
- Replaces: 3C3Z-3220-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Yoke, Front Part Number: 5C3Z-3B387-A
Product Specifications
- Other Name: Shaft - Front Axle
- Position: Front
- Replaces: 5C3Z-3B387-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Passenger Side Part Number: 5C3Z-4234-AA
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right
- Position: Rear Passenger Side
- Replaces: 1C3Z-4234-AAA, 1C3Z-4234-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford F-250 Super Duty Axle Shaft, Rear Driver Side Part Number: 5C3Z-4234-BA
Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL

| Page 1 of 3 |Next >

1-20 of 42 Results

Ford F-250 Super Duty Axle Shaft

OEM Axle Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Axle Shaft with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford F-250 Super Duty Axle Shaft is an essential part of its products, which the automotive market fundamentally relies on the continuous and improved producer durability and disbursement. Intended for the transfer of power from differential system to the drive wheels, the Axle Shaft enables differential rotation of wheels to improve the tractive forces during turn. This feature is rather crucial for the Ford F-250 Super Duty trim levels that come inRegular Cab, Super Cab, and Crew Cab options. The Axle Shaft is usually well built for long-lasting use and superior performance with acts as a backbone within the framework of the automobile space and is visible in the 1999 Ford F-250/350, which came with a 7.3-liter Power Stroke diesel engine, or more modern models with enhanced intelligent powertrains. Thus, the web-based commodity Ford F-250 Super Duty Axle Shaft is used in full-floating and semi-floating axles, which are responsible for weight support and torque transmission to maintain proper wheel alignment in various driving conditions. Interestingly, the 2008 redesign brought a new coating procedure that increases corrosion function and hence the Axle Shaft kin. Being one of the components that play, or rather overplay, the role of supporting the formidable torque outputs of the Ford F-250 Super Duty's mills, the Axle Shaft rightfully ranks for the boosts in performance and safety; it is a crucial component that cannot be dismissed by any true-blue truck aficionado.

Ford F-250 Super Duty Axle Shaft Parts and Q&A

Axle Shaft, Front Driver Side
4C3Z-3220-AA
Q: How to Service and Repair the Axle Shaft in a 10.50-Inch Ring Gear Axle Assembly on Ford F-250 Super Duty?
A:
You must begin your work on a Ford 10.50-Inch Ring Gear axle assembly by first removing the wheels and tires and secondly removing the drive pinion. Start the procedure by detaching the rear anti-lock brake sensor before taking out the nuts and stone shield. You should first remove the caliper pin bolts before taking out the rear disc Brake Caliper. The service needs a secondary person to stretch both the Parking Brake Cable and conduit until they reach their maximum possible length for inserting a suitable holding device. The parking brake cable demands disconnecting at its parking brake lever and handling the cable clamp bolt's removal followed by unclipping the Brake Line. The retainer should next be taken out from the parking brake cable bracket before relocating the cable to a separate area. The brake hose bracket bolt needs to be removed before disconnecting the vent hose at the brake hose junction block. The brake junction block from the rear axle housing must be removed before it hangs free in the air and this process should be followed by unfastening the brake lines from the rear axle housing tie strap while keeping them attached to the disc brake calipers. The axle requires proper support from a transmission jack which the technician should attach securely before beginning to unscrew bolts and nuts from the lower shock absorbers. Vacate the space in front of the differential housing by repositioning the sway bar forward while using a wrench to slowen both links at their lower stabilize bar ends. Disable the stabilizer bar operation by removing both retainer-to-axle brackets together with their stabilizer bar retainers followed by stabilizer bar mounting brackets and U-bolts and allowing the stabilizer bar to dangle freely. Lower the axle from the vehicle after correctly removing the rear spring plate U-bolts and nuts which must be replaced. Place the sway bar in front of the differential housing and then reinstall in the opposite order of removal steps.