Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump and Strainer Set; Fuel Pump Module Assembly; Fuel Pump Kit
Manufacturer Note: Midship, 19 gal., 70 micron pump element, Chassis Cab, without Calif. Ems., FROM 2/1/2004
Replaces: 3C3Z-9H307-DA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2017-2023 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
| Page 1 of 3 |Next >
1-20 of 60 Results
Ford F-350 Super Duty Fuel Pump
Welcome to our website where you can discover high-quality, genuine Ford F-350 Super Duty Fuel Pump. We offer an extensive inventory of OEM Ford F-350 Super Duty Fuel Pump at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford F-350 Super Duty Fuel Pump Parts Questions & Experts Answers
Q: What safety precautions should be followed when servicing the fuel gauge sender and fuel pump module in a steel fuel tank on Ford F-350 Super Duty?
A: Caring service of the fuel gauge sender and fuel pump module inside steel Fuel Tanks needs strict precautions because these tanks contain highly volatile mixtures. The area surrounding fuel components must remain free from both fire and smoking activities. A fire hazard develops from accidental fuel spraying when you remove fuel system components so you must first release fuel system pressure. First empty the fuel tank completely then check for contaminants when the fuel pump module is taken out. Clean the fuel pump flange installation area followed by removal of the six securing bolts which need to be tightened to 10 Nm (89 lb-in) during reinstallation. Exercise gentle handling of the fuel pump module while carefully protecting the float arm and pull it completely out from the fuel tank. The inspector should examine fuel pump module flange surfaces alongside fuel tank gasket contact areas yet should avoid adjusting or polishing surface regions if they present bending, scrapping or corrosion because this will lead to new fuel pump module or fuel tank requirements. The process requires using a new fuel pump module gasket which needs to be discarded and then following the removal procedure backwards.