Other Name: Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core
Position: Front
Replaces: F81Z-18476-AA, HC-21
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999-2004 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
Other Name: Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core
Position: Front
Replaces: 3C3Z-18476-BA, 4C3Z-18476-BA, HC-37
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2003-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
Ford F-350 Super Duty Heater Core
Welcome to our website where you can discover high-quality, genuine Ford F-350 Super Duty Heater Core. We offer an extensive inventory of OEM Ford F-350 Super Duty Heater Core at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Remove and Install a Heater Core for Auxiliary Climate Control on Ford F-350 Super Duty?
A: In order to service the heater core, it is necessary to remove third row seat and right-hand rear quarter trim panel. Disassemble the heater core using the cover which is unscrewed and the hoses are disconnected. To install, install correctly and effectively but seal, undo procedure in reverse order, lubricate where necessary and fill the cooling system.
Q: How to Service and Repair a Heater Core on Ford F-350 Super Duty?
A: In order to fix the heater core, first, do a leak test. Deconnect the heater hoses and drop the glove compartment. Take out the vacuum control motor and electronic Blend Door Actuator. Unscrew the cover of the heater core, and then the heater core. Install again, by aligning the blend door and installing a gasket and reversing the processes of removing.