How to service the rear bumper cover on Ford Five Hundred?

The service for Five Hundred and Montego rear bumper covers starts by removing rear lamps then screws from wheel well areas at 2 Nm (18 lb-in), repeat steps for reinstallation. After removing the luggage compartment trim panel, proceed with taking out the three pin-type retainers from beneath the beam while tightening the six rear bumper cover nuts to 9 Nm (80 lb-in) during installation. The vehicle requires a rear parking aid electrical connector removal when this feature is installed. The removal of the bumper cover requires pulling its leading upward section away from the body to release body attachments before extracting the cover. Check and replace damaged bumper cover mounting reinforcements before evaluating the condition of the center spacer block. Both components need immediate replacement in case of detection. Complete the installation of the bumper cover by going through the opposite steps used to remove it.

OEM Ford Five Hundred Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
Ford Five Hundred Impact Bar, Rear
Part Number: 8G1Z-17906-B
$132.65 MSRP: $193.08
You Save: $60.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Replaces: 6G1Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Impact Bar, Front
Part Number: 8G1Z-17757-A
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 5G1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bumper Cover, Rear
Part Number: 5G1Z-17K835-AAB
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bumper Cover, Front
Part Number: 5G1Z-17D957-BAB
$185.00 MSRP: $269.28
You Save: $84.28 (32%)
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bumper Cover, Front
Part Number: 5G1Z-17D957-AAC
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Five Hundred | SE | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Bumper Cover, Rear
Part Number: 5G1Z-17K835-BAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Five Hundred Bumper

Welcome to our website where you can discover high-quality, genuine Ford Five Hundred Bumper. We offer an extensive inventory of OEM Ford Five Hundred Bumper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Five Hundred Bumper Parts Questions & Experts Answers

Impact Bar, Rear
8G1Z-17906-B
Q: How to service the rear bumper cover on Ford Five Hundred?
A: The service for Five Hundred and Montego rear bumper covers starts by removing rear lamps then screws from wheel well areas at 2 Nm (18 lb-in), repeat steps for reinstallation. After removing the luggage compartment trim panel, proceed with taking out the three pin-type retainers from beneath the beam while tightening the six rear bumper cover nuts to 9 Nm (80 lb-in) during installation. The vehicle requires a rear parking aid electrical connector removal when this feature is installed. The removal of the bumper cover requires pulling its leading upward section away from the body to release body attachments before extracting the cover. Check and replace damaged bumper cover mounting reinforcements before evaluating the condition of the center spacer block. Both components need immediate replacement in case of detection. Complete the installation of the bumper cover by going through the opposite steps used to remove it.