How to Service the Mass Air Flow Sensor on Ford Flex?

The service procedure for the Mass Air Flow (MAF) sensor begins with disconnecting its electrical connector. The service procedure begins by removing the MAF sensor following the removal of its two securing screws. Follow the reverse steps of removal while installing the sensor and tighten screws until they achieve 2 Nm (18 lb-in).

OEM Ford Flex Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

View related parts
Ford Flex Mass Air Flow Sensor
Part Number: BR3Z-12B579-A
$104.96 MSRP: $169.33
You Save: $64.37 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; MAF Sensor; Air Mass Sensor; Sensor
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Mass Air Flow Sensor
Part Number: 3L3Z-12B579-BA
$156.67 MSRP: $257.78
You Save: $101.11 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Charge Temperature Sensor; Intake Air Temperature Sensor; MAF Sensor; Sensor
- Manufacturer Note: 4.6L, Police
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Mass Air Flow Sensor

Welcome to our website where you can discover high-quality, genuine Ford Flex Mass Air Flow Sensor. We offer an extensive inventory of OEM Ford Flex Mass Air Flow Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Flex Mass Air Flow Sensor Parts Questions & Experts Answers

Mass Air Flow Sensor
3L3Z-12B579-BA
Q: How to Service the Mass Air Flow Sensor on Ford Flex?
A: The service procedure for the Mass Air Flow (MAF) sensor begins with disconnecting its electrical connector. The service procedure begins by removing the MAF sensor following the removal of its two securing screws. Follow the reverse steps of removal while installing the sensor and tighten screws until they achieve 2 Nm (18 lb-in).