OEM Ford Freestyle Bumper Cover

Ford Freestyle Bumper Cover Parts and Q&A

• Bumper Cover, Front Upper
  5F9Z-17D957-AAC
  Q: How to service and repair the front bumper cover on Ford Freestyle?

  A:

  Service and repair of Freestyle front bumper cover begins by disconnecting the 2 front bumper cover scrivets together with the 2 front bumper cover bolts. After disconnecting the 3 front bumper cover lower retainers begin releasing the 6 lower wheel lip molding scrivets from each side of the vehicle. The electrical connector must be disconnected when fog lamps are present in the vehicle. The 6 front bumper cover nuts must be taken out along with the installation step that requires a 6 Nm (53 lb-in) torque. Both left-hand and right-hand wheel lip molding tabs can be released to take off the front bumper cover while installation involves the opposite steps for removal.
• Bumper Cover, Rear Upper
  5F9Z-17F881-AAA
  Q: How to service the rear bumper cover on Ford Freestyle?

  A:

  The service procedure for the Freestyle rear bumper cover begins with rear lamp removal then disconnecting the rear parking aid electrical connector when present. Open the liftgate to access five rear bumper cover scrivets at the opening then remove the two pin-type retainers at the beam base. Uninstall the two bolts which bind the bumper cover to the mounting reinforcements. For proper bumper cover detachment from the body, users need to gently lift the rear cover while keeping it at the forward outboard area. Check the mounting reinforcements for damage when the bumper cover is removed. Replace them if any damage exists. The installation process should be completed by performing the opposite steps used during the removal task.