How to Service and Repair a 40 Percent Rear Seat Cushion in the Second Row on Ford Freestyle?

A technician can begin second-row 40 percent rear cushion servicing by taking out both the 40 percent rear seat and the rear seat backrest. Use the latched position of the inboard latch foot to turn the backrest into an upright position. The service starts by releasing the J-clip under the seat that holds the cushion trim cover followed by detaching the J-clip connecting the foam pad to the cushion frame from beneath the rear seat of the cushion. Proceed to remove cushion trim cover retainers from both sides of the riser/seat track and cushion frame before extracting cushion foam pan and cushion trim cover. To begin the process locate two screws that will separate the riser/seat track outboard inner cover after which you should detach the riser/seat track outboard outer cover by removing its three screws. First remove the recliner handle screw before taking out two additional screws to separate the recliner outer cover, make sure the release strap stays within the cover opening to avoid installation issues. To perform this operation first free the pin-type retainer and release the locator tabs while taking away the recliner inner cover at a pace that respects the spring-loaded recliner mechanism. Use the provided routing information to disconnect both cables from the recliner before removing the two bolts which must be tightened to 50 Nm (37 lb-ft) when reinstalling. To proceed with the installation, first remove the six cushion frame-to-riser/seat track nuts and afterward take out the riser/seat track that requires tightening to 23 Nm (17 lb-ft). When reinstalling the safety belt buckle bolt tighten it to 37 Nm (27 lb-ft). Begin by removing the screw and the inboard pivot cover and the pivot grommet subsequent to which you should remove both screws from the riser inboard inner cover and finally detach three screws from the riser inboard outer cover. The process ends by separating the cushion trim cover from the cushion foam pad before reassembly through the reverse order of disassembly steps.

OEM Ford Freestyle Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Seat Cushions found

View related parts
Ford Freestyle Seat Cushion Pad, Rear Center Driver Side Part Number: 5F9Z-7463841-BA
$23.39 MSRP: $32.36
You Save: $8.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Center Left; Seat Cushion
- Manufacturer Note: 60% Seat
- Position: Rear Center Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Center Passenger Side Part Number: 5F9Z-7463840-AA
$27.67 MSRP: $38.27
You Save: $10.60 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Center Right; Seat Cushion
- Position: Rear Center Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Driver Side Part Number: 5F9Z-7463841-DA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Rear Left; Seat Cushion
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Part Number: 5F9Z-7463841-CA
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Center Driver Side Part Number: 5F9Z-7463841-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Center Left; Seat Cushion
- Position: Rear Center Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Center Passenger Side Part Number: 5F9Z-7463840-EA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Center Right; Seat Cushion
- Manufacturer Note: 40% Seat
- Position: Rear Center Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Seat Cushion Pad, Rear Passenger Side Part Number: 5F9Z-7463840-DA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Rear Right; Seat Cushion
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Freestyle Seat Cushion

OEM Seat Cushion boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cushion with long life and a perfect fit. Come to our website and find genuine Ford Freestyle parts. We keep a wide inventory of OEM Freestyle parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Freestyle Seat Cushion is known to be an important addition that is incorporated in the various automobile manufacturers which are Ford Freestyle to improve on the comfort of drivers and passengers in their automobiles. The apparent problems of tender bum, stiff neck, and sleepy eyes that results from long drive are effectively solved by this Seat Cushion to keep the drivers as well as the passengers comfortable. Ford Freestyle, which has been produced since 2005, is one of the first crossovers with elements of leg-end sedans and cars in off-road equipment, and the Seat Cushion also remains an organic continuation of this line. Some of the styles that you can get in Ford Freestyle Seat Cushion are the beaded and sheepskin, which in addition to the comfort they offer, they enhance blood flow and rate of heat exchange, thus being suitable for any weather. Given its universality to synchronise with many Freestyle models, it could be a boon to every driver by lessening the time spent on the wheel and providing safety on the roads. This makes the Ford Freestyle high and combined with the Seat Cushion, increases its visibility and convenience which strengthens its position in the market. Also, there are diversified functional differences between the Ford Freestyle Seat Cushion and more ordinary cushions, involving heat and massage functions, which help the cushion stand out form the others and enjoy a higher client approval of its service. In conclusion, the Ford Freestyle Seat Cushion should be seen as a very practical part, as it adds comfort to the ride, and, thus, speaks for the company's and its cars 'simplicity and reliability and search for perfection in action'.

Ford Freestyle Seat Cushion Parts and Q&A

Seat Cushion Pad, Rear Driver Side
5F9Z-7463841-DA
Q: How to Service and Repair a 40 Percent Rear Seat Cushion in the Second Row on Ford Freestyle?
A:
A technician can begin second-row 40 percent rear cushion servicing by taking out both the 40 percent rear seat and the rear seat backrest. Use the latched position of the inboard latch foot to turn the backrest into an upright position. The service starts by releasing the J-clip under the seat that holds the cushion trim cover followed by detaching the J-clip connecting the foam pad to the cushion frame from beneath the rear seat of the cushion. Proceed to remove cushion trim cover retainers from both sides of the riser/seat track and cushion frame before extracting cushion foam pan and cushion trim cover. To begin the process locate two screws that will separate the riser/seat track outboard inner cover after which you should detach the riser/seat track outboard outer cover by removing its three screws. First remove the recliner handle screw before taking out two additional screws to separate the recliner outer cover, make sure the release strap stays within the cover opening to avoid installation issues. To perform this operation first free the pin-type retainer and release the locator tabs while taking away the recliner inner cover at a pace that respects the spring-loaded recliner mechanism. Use the provided routing information to disconnect both cables from the recliner before removing the two bolts which must be tightened to 50 Nm (37 lb-ft) when reinstalling. To proceed with the installation, first remove the six cushion frame-to-riser/seat track nuts and afterward take out the riser/seat track that requires tightening to 23 Nm (17 lb-ft). When reinstalling the safety belt buckle bolt tighten it to 37 Nm (27 lb-ft). Begin by removing the screw and the inboard pivot cover and the pivot grommet subsequent to which you should remove both screws from the riser inboard inner cover and finally detach three screws from the riser inboard outer cover. The process ends by separating the cushion trim cover from the cushion foam pad before reassembly through the reverse order of disassembly steps.