How to Service and Repair the 6-Speed Automatic Transmission Oil Cooler Lines on Ford Fusion?

Start the service and repair process of 6-speed transmission fluid cooler tubes by positioning the vehicle on a hoist while it remains in neutral. The upper transmission fluid cooler tube needs to be removed from the radiator after which 7 bolts and splash shield must be removed if present along with the front splash shield requiring removal of 2 screws and 4 retainers and 4 bolts. Users must carefully disconnect the lower transmission fluid cooler tube from the radiator by avoiding excessive force on the hose clamps designed with special epoxy because tube replacement may be necessary in case of damage. First remove the transmission fluid cooler tubes by disconnecting their hoses and then unfasten the 2 bolts which secure them in position. You should only detach the tubes from their retainers without unfastening them from the shroud. Mount the new O-rings to the transmission fluid cooler tubes before installing them on their respective positions and tight the fittings to 10 Nm torque (89 inch lbs.). Insert the tubes into position while installing the retainer and direct the power steering hose to pass between the transmission fluid cooler hoses. Use caution when attaching the transmission fluid cooler hoses to their respective tubes through proper hose clamp installation. The installation of the lower transmission fluid cooler tube into the radiator requires a torque of 30 Nm (22 ft. lbs.) before proceeding with the front splash shield installation by using 2 screws and securing fasteners along with 4 bolts. For models with this requirement replace the 7 bolts and the splash shield and install the upper transmission fluid cooler tube into the radiator while tightening it to 30 Nm (22 ft. lbs.). After removing the fluid fill plug users should check the transmission fluid level at normal operating temperature which should fall between the two top marks. Users need to add automatic transmission fluid before reinstallation and tightening the fluid fill plug to 39 Nm (29 ft. lbs. torque).

OEM Ford Fusion Automatic Transmission Oil Cooler Line

AT Oil Cooler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Automatic Transmission Oil Cooler Lines found

View related parts
Ford Fusion Cooler Line Part Number: DM5Z-7A030-A
$100.38 MSRP: $146.12
You Save: $45.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line; Cooler Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Cooler Pipe Part Number: DG9Z-7R081-C
$143.58 MSRP: $209.00
You Save: $65.42 (32%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Oil Cooler Tube Part Number: 6E5Z-7R081-F
$94.56 MSRP: $145.52
You Save: $50.96 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Cooler Pipe Part Number: DG9Z-7R081-A
$153.43 MSRP: $223.33
You Save: $69.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Inlet Pipe Part Number: 6E5Z-7A030-A
$47.99 MSRP: $71.87
You Save: $23.88 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube; Automatic Transmission Oil Cooler Tube; Transmission Oil Cooler Line; Connector Tube; Inlet Tube; Cooler Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Oil Tube Part Number: 6E5Z-7A031-A
$54.34 MSRP: $77.73
You Save: $23.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube; Automatic Transmission Oil Cooler Hose; Automatic Transmission Oil Cooler Tube; Transmission Oil Cooler Line; Outlet Pipe; Outlet Tube; Cooler Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Cooler Pipe Part Number: HG9Z-7R081-C
$207.25 MSRP: $304.33
You Save: $97.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Fusion Cooler Line Part Number: 6E5Z-7R081-E
$76.85 MSRP: $111.87
You Save: $35.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose; Oil Cooler Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Inlet Pipe Part Number: DG9Z-7890-B
$59.79 MSRP: $91.85
You Save: $32.06 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Oil Cooler; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line; Inlet Tube; Cooler Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | S, SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Cooler Line Part Number: BE5Z-7R081-A
$76.14 MSRP: $110.83
You Save: $34.69 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Oil Cooler; Automatic Transmission Oil Cooler Hose Assembly; Automatic Transmission Oil Cooler Hose
- Replaces: AE5Z-7R081-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Inlet Pipe Part Number: DG9Z-7R081-H
$154.92 MSRP: $225.50
You Save: $70.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line; Cooler Pipe
- Replaces: DG9Z-7R081-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | SE, Titanium | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Fusion Cooler Pipe Part Number: EG9Z-7R081-B
$157.44 MSRP: $229.17
You Save: $71.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Replaces: DG9Z-7R081-G, EG9Z-7R081-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2016 Ford Fusion | SE | 4 Cyl 1.5 L GAS
View related parts
Ford Fusion Inlet Pipe Part Number: DM5Z-7A031-A
$104.16 MSRP: $151.62
You Save: $47.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube; Automatic Transmission Oil Cooler Hose Assembly; Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Cooler Pipe Part Number: DG9Z-7R081-K
$176.33 MSRP: $256.67
You Save: $80.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Replaces: DG9Z-7R081-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | S, SE, SEL | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Inlet Tube Part Number: HG9Z-7C410-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Oil Cooler; Automatic Transmission Oil Cooler Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Inlet Pipe Part Number: HG9Z-7R081-D
$128.47 MSRP: $187.00
You Save: $58.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Outlet Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Fusion Cooler Pipe Part Number: HG9Z-7R081-B
$204.75 MSRP: $300.67
You Save: $95.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Ford Fusion Hose Assembly Part Number: HD9Z-7R081-B
$134.77 MSRP: $196.17
You Save: $61.40 (32%)
Product Specifications
- Other Name: Tube Assembly; Automatic Transmission Oil Cooler Hose Assembly; Inlet Tube; Outlet Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Cooler Pipe Part Number: DG9Z-7890-A
Product Specifications
- Other Name: Hose - Oil Cooler; Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | SE | 4 Cyl 1.6 L GAS
View related parts
Ford Fusion Tube Assembly Part Number: HD9Z-7R081-E
$268.43 MSRP: $394.17
You Save: $125.74 (32%)
Product Specifications
- Other Name: Automatic Transmission Oil Cooler Hose Assembly; Transmission Oil Cooler Line; Cooler Pipe
- Replaces: HD9Z-7R081-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

Ford Fusion Automatic Transmission Oil Cooler Line

OEM Automatic Transmission Oil Cooler Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Oil Cooler Line with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Fusion Automatic Transmission Oil Cooler Line is crucial linkage to total reliability and superb performance of Ford's mid-size sedans. This AUTOMATIC TRANSMISSION OIL COOLER LINE is crafted to provide the premier outlook to channel the oil, coming with a supplied line that cools the oil and a return line that provides the cooled oil to the engine; fits most fusions. The inclusion of compatibility with multiple Fusion variants' improvement enhances its importance because of the responsibility of circulating prescribed pressurized oil without leakage, thus boosting the general efficiency and safety of vehicle engines. The Automatic Transmission Oil Cooler Line of the Ford Fusion is designed to meet the challenges of daily usage that is why it can be considered as significant innovation in the sphere of automobile industry. It also gives the advantage of increasing the life span of the transmission system as well as the pleasure of driving as transmissions are improved to give smooth rides to vehicles. In addition, the Ford Fusion has received a commend for its environmental friendliness more so, the entire series of the Ford Fusion 2013 was awarded the Green car of year s Certification thus underlining Fords environmental conservation effort. Through its progressive design approach and basic component, the Ford Fusion Automatic Transmission Oil Cooler Line can be characterized as the representation of the brand's commitment and focus on quality, along with the provision of the enjoyable driving experience that every Ford Fusion model promises to provide.

Ford Fusion Automatic Transmission Oil Cooler Line Parts and Q&A

Oil Cooler Tube
6E5Z-7R081-F
Q: How to Service and Repair the 6-Speed Automatic Transmission Oil Cooler Lines on Ford Fusion?
A:
Start the service and repair process of 6-speed transmission fluid cooler tubes by positioning the vehicle on a hoist while it remains in neutral. The upper transmission fluid cooler tube needs to be removed from the Radiator after which 7 bolts and splash shield must be removed if present along with the front splash shield requiring removal of 2 screws and 4 retainers and 4 bolts. Users must carefully disconnect the lower transmission fluid cooler tube from the radiator by avoiding excessive force on the hose clamps designed with special epoxy because tube replacement may be necessary in case of damage. First remove the transmission fluid cooler tubes by disconnecting their hoses and then unfasten the 2 bolts which secure them in position. You should only detach the tubes from their retainers without unfastening them from the shroud. Mount the new O-rings to the transmission fluid cooler tubes before installing them on their respective positions and tight the fittings to 10 Nm torque (89 inch lbs.). Insert the tubes into position while installing the retainer and direct the Power Steering Hose to pass between the transmission fluid cooler hoses. Use caution when attaching the transmission fluid cooler hoses to their respective tubes through proper hose clamp installation. The installation of the lower transmission fluid cooler tube into the radiator requires a torque of 30 Nm (22 ft. lbs.) before proceeding with the front splash shield installation by using 2 screws and securing fasteners along with 4 bolts. For models with this requirement replace the 7 bolts and the splash shield and install the upper transmission fluid cooler tube into the radiator while tightening it to 30 Nm (22 ft. lbs.). After removing the fluid fill plug users should check the transmission fluid level at normal operating temperature which should fall between the two top marks. Users need to add automatic transmission fluid before reinstallation and tightening the fluid fill plug to 39 Nm (29 ft. lbs. torque).