Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2014-2020 Ford Fusion | SE, SEL | 4 Cyl 1.5 L GAS
Ford Fusion Radiator
Welcome to our website where you can discover high-quality, genuine Ford Fusion Radiator. We offer an extensive inventory of OEM Ford Fusion Radiator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to service and repair the radiator on Ford Fusion?
A: Drain cooling system. Take off cooling Fan Motor/shroud; take off power-steering hose retainer. Unscrew upper hose, retainer and hose radiator-to-degas bottle. In the case of automatics, loosen transmission cooling tubes; re-connect with 30 Nm (22 ft-lb). Unattach bottom hose, unattach top-support tabs, detach A/C Condenser, take out radiator. Reassemble, fill, and bleed.
Q: How to service and repair the radiator on all on Ford Fusion?
A: Service the radiator, drain the cooling system, remove the Fan Motor and shroud and disconnect the hoses. With automatic transmissions, remove the cooling tubes. Installation: Take out the radiator by lifting tabs and parting the A/C Condenser. Install the new rad and reverse the process and reload up the cooling system.