How to Service and Repair the Power Steering Hose for 3.0L and 3.5L Engines on Ford Fusion?

Begin the power steering line/hose service and repair on 3.0L and 3.5L engine vehicles by placing the car on a hoist set to neutral mode. You need to remove power steering fluid from its reservoir using proper suction and then detach the battery and remove the tray while disconnecting power control module (PCM) connectors followed by removing the wiring harness retainer from the PCM bracket. The following procedure requires the lower cowl panel grille removal step. The power steering pressure line bracket-to-reservoir bolt requires removal on the 3.0L engine and the detached electrical harness retainer needs to be tightened to 9 Nm (80 inch lbs.) during reinstallation. Both power steering pressure line bolts connecting the bracket to the engine must be removed before detaching the electrical harness retainer and subsequently tightening it to 9 Nm (80 inch lbs.) for reinstallation. To remove the power steering pressure line bracket from the RH valve cover stud on the 3.5L engine you need to detach its electrical harness retainer and tighten it to 9 Nm (80 inch lbs.) when installed. Detaching the engine block heater harness from the power steering pressure line is a prerequisite before removing the power steering pressure line bracket-to-steering gear bolt which requires a torque of 15 Nm (11 ft. lbs.) during reinstallation. New bolts with different specifications need to replace the power steering pressure line-to-power steering pump banjo bolt and its two adjoining seals. The new bolt requires a torque of 48 Nm (35 ft. lbs.) when applying it during assembly. The power steering pressure line requires removal of its steering gear banjo bolt as well as the entire line while discarding both components. Install the new banjo bolt with a torque of 55 Nm (41 ft. lbs.) during reassembly. A replacement of banjo bolts and seals remains essential when disconnecting the power steering pressure line from either the pump or the gear. Install the components while performing the reverse order of the removal process before filling the power steering system.

OEM Ford Fusion Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Power Steering Hoses found

View related parts
Ford Fusion Reservoir Hose Part Number: AH6Z-3691-C
$33.55 MSRP: $53.27
You Save: $19.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Connecting; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose
- Manufacturer Note: Reservoir To Pump
- Replaces: 7H6Z-3691-B, AH6Z-3691-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Power Steering Return Hose Part Number: AH6Z-3A713-G
$32.08 MSRP: $44.38
You Save: $12.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose; Lower Return Tube; Upper Return Hose
- Manufacturer Note: Gear To Cooler
- Replaces: 7H6Z-3A713-B, AH6Z-3A713-A, AH6Z-3A713-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Power Steering Return Hose, Front Lower Part Number: 6E5Z-3A713-BC
$76.58 MSRP: $105.94
You Save: $29.36 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Line, Front Lower; Power Steering Hose; Lower Return Tube
- Manufacturer Note: Gear To Cooler
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Power Steering Return Hose Part Number: 6E5Z-3A713-AB
$22.99 MSRP: $31.81
You Save: $8.82 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose; Upper Return Tube
- Replaces: 7E5Z-3A713-BB, 7E5Z-3A713-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Power Steering Pressure Hose Part Number: AH6Z-3A719-C
$95.77 MSRP: $160.78
You Save: $65.01 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: 7H6Z-3A719-C, AH6Z-3A719-A, AH6Z-3A719-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Power Steering Return Hose, Front Lower Part Number: 7E5Z-3A713-A
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Line, Front Lower; Power Steering Hose; Lower Return Hose
- Position: Front Lower
- Replaces: 6E5Z-3A713-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Reservoir Hose Part Number: 7E5Z-3691-A
Product Specifications
- Other Name: Hose - Connecting; Power Steering Reservoir Hose; Power Steering Hose; Power Steering Suction Hose
- Replaces: 6E5Z-3691-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Power Steering Pressure Hose Part Number: 6E5Z-3A719-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: 6E5Z-3A719-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Power Steering Return Hose, Front Lower Part Number: AH6Z-3A713-H
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Line, Front Lower; Power Steering Hose; Lower Return Hose; Lower Return Tube
- Manufacturer Note: Gear To Cooler
- Position: Front Lower
- Replaces: AH6Z-3A713-D, 7H6Z-3A713-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Power Steering Pressure Hose Part Number: 7E5Z-3A719-B
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Replaces: 6E5Z-3A719-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Power Steering Return Hose Part Number: 6E5Z-3A713-BB
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Lower Return Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Power Steering Return Hose Part Number: 6E5Z-3A713-AC
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Power Steering Return Hose Part Number: AH6Z-3A713-F
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Manufacturer Note: Cooler to reservoir
- Replaces: AH6Z-3A713-C, AH6Z-3A713-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS

Ford Fusion Power Steering Hose

OEM Power Steering Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Power Steering Hose with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Fusion Power Steering Hose is one of the parts which plays important role in giving strength and endurance in Ford Fusion cars. This is a very critical hose that links the power steering gear to the steering pump, through which movement of hydraulic fluid that assists in steering is done, hence enhancing the efficiency and safety of the car in steering. The high-pressure Ford Power Steering Hose is made from a high re-enforced rubber that allows proper conveyance of high pressure fluid from the engine driven power steering pump to the steering gear while the return hose sends the fluid back to the reservoir. This reveals that it is versatile and essential for transforming the Ford Fusion's steering performance because it can be used on later generations of Fusion models, even the ones made since 2005. The Ford Fusion Power Steering Hose is designed to be durable so as reduce the occurrence of the power steering fluid leakage that leads to increased effort in steering or noise. It comes with design variations that may be rubber hoses or assemblies with pre bent metal tubing that augment its functionality. For instance, the Ford Fusion Power Steering Hose has provided for the use of fittings on both ends particularly for high pressure so as to conform to the fitting standard. This attention to detail does not only help in the increased durability of the steering system but also adds to Ford Company's promise of quality and innovation in the market of automobiles. Largely because the focus of the Ford Fusion Power Steering Hose is on the efficiency and safety of the driving experience, it is for these reasons that Fusion owners can confidently consider investing in this part.

Ford Fusion Power Steering Hose Parts and Q&A

Power Steering Return Hose
6E5Z-3A713-AC
Q: How to Service and Repair the Power Steering Hose for 3.0L and 3.5L Engines on Ford Fusion?
A:
Begin the power steering line/hose service and repair on 3.0L and 3.5L engine vehicles by placing the car on a hoist set to neutral mode. You need to remove power steering fluid from its reservoir using proper suction and then detach the battery and remove the tray while disconnecting power control module (PCM) connectors followed by removing the wiring harness retainer from the PCM bracket. The following procedure requires the lower cowl panel grille removal step. The power steering pressure line bracket-to-reservoir bolt requires removal on the 3.0L engine and the detached electrical harness retainer needs to be tightened to 9 Nm (80 inch lbs.) during reinstallation. Both power steering pressure line bolts connecting the bracket to the engine must be removed before detaching the electrical harness retainer and subsequently tightening it to 9 Nm (80 inch lbs.) for reinstallation. To remove the power steering pressure line bracket from the RH valve cover stud on the 3.5L engine you need to detach its electrical harness retainer and tighten it to 9 Nm (80 inch lbs.) when installed. Detaching the engine block heater harness from the power steering pressure line is a prerequisite before removing the power steering pressure line bracket-to-steering gear bolt which requires a torque of 15 Nm (11 ft. lbs.) during reinstallation. New bolts with different specifications need to replace the power steering pressure line-to-Power Steering Pump banjo bolt and its two adjoining seals. The new bolt requires a torque of 48 Nm (35 ft. lbs.) when applying it during assembly. The power steering pressure line requires removal of its steering gear banjo bolt as well as the entire line while discarding both components. Install the new banjo bolt with a torque of 55 Nm (41 ft. lbs.) during reassembly. A replacement of banjo bolts and seals remains essential when disconnecting the power steering pressure line from either the pump or the gear. Install the components while performing the reverse order of the removal process before filling the power steering system.