How to service and repair the oil pan to prevent engine failure on Ford Fusion?

Maintenance and repairs of the oil pan need clean working conditions to stop foreign objects from triggering engine breakdowns. Put the vehicle on a hoisting system in NEUTRAL position before you take off the LH catalytic converter. Uninstall the drain plug from the engine oil container then wash and reinstall it tightly to 26 Nm (19 ft. lbs.). When preparing for oil pan installation mark the location of stud bolts first then remove 7 oil pan-to-transaxle screws, 5 stud bolts and the oil pan together with its gasket for disposal. The installation process requires the use of a plastic scraping tool to prepare sealing surfaces where customers should also clean every surface with metal surface cleaner before installing a new oil pan gasket. Post silicon sealant application on designated spots around the specified areas the operator should install the oil pan while tightening 10 bolts and 5 stud bolts by hand. Tighten the two oil pan-to-transaxle bolts to 48 Nm (35 ft. lbs.) followed by the specified sequence installation and torquing of engine oil pan-to-engine bolts and stud bolts to 25 Nm (18 ft. lbs.). You should install the LH catalytic converter along with filling the engine with clean engine oil.

OEM Ford Fusion Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Oil Pans found

View related parts
Ford Fusion Oil Pan
Part Number: 9L8Z-6675-A
$137.81 MSRP: $200.60
You Save: $62.79 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: 6E5Z-6675-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: DS7Z-6675-A
$133.14 MSRP: $193.80
You Save: $60.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: BM5Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | SE, SEL | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: 7T4Z-6675-A
$130.68 MSRP: $201.67
You Save: $70.99 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: FT4Z-6675-D
$127.47 MSRP: $196.17
You Save: $68.70 (36%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil
- Replaces: FT4Z-6675-A, FT4Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | Sport | 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: CJ5Z-6675-G
$160.83 MSRP: $248.20
You Save: $87.37 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: BB5Z-6675-A, CJ5Z-6675-D, CJ5Z-6675-A, CJ5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, S, SE, SEL, Titanium | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: 9E5Z-6675-B
$129.64 MSRP: $188.70
You Save: $59.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: 9E5Z-6675-A, 8E5Z-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Oil Pan
Part Number: CM5Z-6675-D
$124.31 MSRP: $180.95
You Save: $56.64 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: CP9Z-6675-A, CM5Z-6675-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum Hybrid, S Hybrid, SE Hybrid, SEL Hybrid, Titanium Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Fusion Oil Pan
Part Number: 6M8Z-6675-AB
$130.99 MSRP: $190.67
You Save: $59.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: Use RTV Silicone Sealer In Place Of Gasket For This Application. Refer To Workshop Manual For Specification
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS

Ford Fusion Oil Pan

Welcome to our website where you can discover high-quality, genuine Ford Fusion Oil Pan. We offer an extensive inventory of OEM Ford Fusion Oil Pan at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Fusion Oil Pan Parts Questions & Experts Answers

Oil Pan
9L8Z-6675-A
Q: How to service and repair the oil pan to prevent engine failure on Ford Fusion?
A: Maintenance and repairs of the oil pan need clean working conditions to stop foreign objects from triggering engine breakdowns. Put the vehicle on a hoisting system in NEUTRAL position before you take off the LH Catalytic Converter. Uninstall the drain plug from the engine oil container then wash and reinstall it tightly to 26 Nm (19 ft. lbs.). When preparing for oil pan installation mark the location of stud bolts first then remove 7 oil pan-to-transaxle screws, 5 stud bolts and the oil pan together with its gasket for disposal. The installation process requires the use of a plastic scraping tool to prepare sealing surfaces where customers should also clean every surface with metal surface cleaner before installing a new oil pan gasket. Post silicon sealant application on designated spots around the specified areas the operator should install the oil pan while tightening 10 bolts and 5 stud bolts by hand. Tighten the two oil pan-to-transaxle bolts to 48 Nm (35 ft. lbs.) followed by the specified sequence installation and torquing of engine oil pan-to-engine bolts and stud bolts to 25 Nm (18 ft. lbs.). You should install the LH catalytic converter along with filling the engine with clean engine oil.