How to service the LH catalytic converter on a 3.0L engine on Ford Fusion?

The LH catalytic converter service starts by hoisting the 3.0L engine vehicle in neutral position. The first step is to remove both the oil filter and oil level indicator as well as its tube. After heating the vehicle you must disconnect both the heated oxygen sensor (HO2S) and the catalyst monitor sensor (CMS). Disconnect the two nuts securing the LH catalytic converter to the exhaust flexible pipe before discarding both parts and the gasket and nuts. The first step involves removing four bolts which secure the LH catalytic converter manifold shield and after that two bolts which secure the shield bracket until the bracket is removed. Disassemble the LH catalytic converter manifold by removing two bracket bolts along with six nuts from the manifold but keeping aside both the nuts and the gasket. The technician removes the six manifold studs of the LH catalytic converter before cleaning and inspecting the manifold. The installation requires six new LH catalytic converter manifold studs which should get tightened to 11 Nm (8 ft. lbs.). Procedure for inserting the new LH catalytic converter manifold gasket starts with putting the studs into position. Then secure the manifold into place while giving the new nuts just finger-tightness. The LH catalytic converter-to-exhaust flexible pipe requires installation of a new gasket followed by the two nuts secured at 40 Nm (30 ft. lbs.). The successful installation of the converter bracket bolts requires correct tightening of the catalytic converter manifold nuts because this prevents exhaust leaks. Install the nuts on the specified sequence and apply torque uniformly in two stages at 20 Nm (15 ft. lbs. each stage). First tighten both the shield bracket bolts to 20 Nm (15 ft. lbs.), then move to tightening the two LH catalytic converter manifold bracket bolts to 20 Nm (15 ft. lbs.). Secure the LH catalytic converter manifold shield with four bolts that should be tightened to 10 Nm (89 inch lbs.). Follow a three-step process for tightening the LH catalytic converter-to-exhaust flexible pipe nuts by beginning with 5 Nm (44 inch lbs.) tension on the passenger side nut before adding 40 Nm (30 ft. lbs.) to the driver side nut and completing with 40 Nm (30 ft. lbs.) on the passenger side nut. The technician must reinstall both the heated oxygen sensor (HO2S) and the catalyst monitor sensor (CMS) after which the oil level indicator and tube can be reinstalled. The last task involves replacing the oil filter by tightening it to 5 Nm (44 inch lbs.) before rotating it 180 degrees further.

How to service the catalytic converter on a 3.0L RH All Wheel Drive (AWD) on Ford Fusion?

Start the catalytic converter service of a 3.0L RH All Wheel Drive (AWD) vehicle by first placing it in neutral gear position and hoisting the vehicle. New fasteners and gaskets should be used in combination with flange face cleaning before new gasket installation ensures a proper seal. Begin the service procedure by taking out the exhaust flexible pipe followed by the intermediate shaft. Detaching the heated oxygen sensor and catalyst monitor sensor enables you to remove the roll restrictor bolt for rotating the engine ahead until torque reaches 90 Nm (66 ft. lbs.). Reinstall these components in the reverse order. You can install the heat shield after removing its six bolts while tightening it to 10 Nm (89 inch lbs.) torque. First disconnect the three nuts along with heat shield brackets before reinstallation where the nuts require a torque of 20 Nm (15 ft. lbs.). The three nuts holding the RH catalytic converter need to be taken away after their removal and discarding of the gasket and nuts before you tighten the new nuts to 40 Nm (30 ft. lbs.). Tear out the three RH catalytic converter-to-exhaust manifold studs and when installing new studs apply torque to 25 Nm (18 ft. lbs.). Quest for reverse the procedure by using new gaskets and nuts.

OEM Ford Fusion Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

63 Catalytic Converters found

View related parts
Ford Fusion Catalytic Converter, Passenger Side Part Number: 7T4Z-5E212-A
$894.75 MSRP: $1122.86
You Save: $228.11 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Exhaust Manifold, Front Driver Side Part Number: DG9Z-5G232-D
$710.85 MSRP: $960.00
You Save: $249.15 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Catalytic Converter, Passenger Side Part Number: AE5Z-5E212-M
$480.39 MSRP: $591.43
You Save: $111.04 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Catalytic Converter, Front Driver Side Part Number: AE5Z-5E213-B
$398.22 MSRP: $546.36
You Save: $148.14 (28%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Exhaust Manifold, Passenger Side Part Number: DG9Z-5G232-E
$1117.20 MSRP: $1512.86
You Save: $395.66 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Manifold W/Converter
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Exhaust Manifold, Front Driver Side Part Number: 7E5Z-5G232-AA
$1308.63 MSRP: $1810.36
You Save: $501.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold W/Converter; Manifold; Preconverter; Catalytic Converter
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Exhaust Manifold Part Number: AE5Z-5G232-A
$1962.98 MSRP: $2486.00
You Save: $523.02 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Manifold W/Converter; Preconverter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Exhaust Manifold Part Number: JV6Z-5G232-A
$1030.13 MSRP: $1301.43
You Save: $271.30 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Exhaust Manifold Part Number: DS7Z-5G232-A
$1480.35 MSRP: $1873.14
You Save: $392.79 (21%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Exhaust Manifold Part Number: HG9Z-5G232-A
$892.88 MSRP: $1127.14
You Save: $234.26 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017 Ford Fusion | Platinum, S, SE, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Catalytic Converter Part Number: DG9Z-5E212-D
$714.64 MSRP: $894.14
You Save: $179.50 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Catalytic Converter, Rear Part Number: AE5Z-5E212-P
$951.00 MSRP: $1194.29
You Save: $243.29 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Catalytic Converter, Green, Rear Passenger Side Part Number: AE5Z-5E212-H
$368.82 MSRP: $451.00
You Save: $82.18 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Rear Forward
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Exhaust Manifold, Green, Driver Side Part Number: AE5Z-5G232-B
$784.88 MSRP: $990.00
You Save: $205.12 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Manifold; Preconverter; Exhaust Manifold & Catalyst Assembly; Integrated Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Muffler & Pipe Part Number: JS7Z-5F250-A
$974.51 MSRP: $1224.14
You Save: $249.63 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018 Ford Fusion | Platinum, S, SE, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Catalytic Converter, Passenger Side Part Number: GD9Z-5E212-A
$1333.39 MSRP: $1679.86
You Save: $346.47 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Catalytic Converter Part Number: DG9Z-5E212-J
$976.88 MSRP: $1227.14
You Save: $250.26 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: DG9Z-5E212-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Catalytic Converter, Rear Part Number: 9E5Z-5E212-D
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Rear Rearward; Converter
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Catalytic Converter, Passenger Side Part Number: AE5Z-5E212-E
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Exhaust Manifold, Driver Side Part Number: 9E5Z-5G232-A
$854.63 MSRP: $1078.57
You Save: $223.94 (21%)
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Preconverter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX

| Page 1 of 4 |Next >

1-20 of 63 Results

Ford Fusion Catalytic Converter

OEM Catalytic Converter boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Catalytic Converter with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Catalytic Converter as a part of emission system in Ford Fusion Cars is an important device that changes toxic gases which include Carbon Monoxide, Hydrocarbons, and Nitrogen oxides into relatively harmless products such as water, Carbon Dioxide and Nitrogen. This device includes its active substance in the form of autonomously operating catalysts of platinum, palladium, rhodium and other elements which act to speed up a chemical reaction but are not changed in it. There has been a variety of Catalytic Converters at one time or the other, while today's models incorporate honey comb design to enhance contact with emission gases. The Ford Fusion Catalytic Converters provide less back pressure and restriction improving the general performance of the car engine together with improving the efficiency of the catalyst. It has direct fit and universal types and the direct fit converters are perfect replacements for the factory converters.

Ford Fusion Catalytic Converter Parts and Q&A

Catalytic Converter
6E5Z-5E212-DA
Q: How to service the LH catalytic converter on a 3.0L engine on Ford Fusion?
A:
The LH catalytic converter service starts by hoisting the 3.0L engine vehicle in neutral position. The first step is to remove both the Oil Filter and oil level indicator as well as its tube. After heating the vehicle you must disconnect both the heated oxygen sensor (HO2S) and the catalyst monitor sensor (CMS). Disconnect the two nuts securing the LH catalytic converter to the exhaust flexible pipe before discarding both parts and the gasket and nuts. The first step involves removing four bolts which secure the LH catalytic converter manifold shield and after that two bolts which secure the shield bracket until the bracket is removed. Disassemble the LH catalytic converter manifold by removing two bracket bolts along with six nuts from the manifold but keeping aside both the nuts and the gasket. The technician removes the six manifold studs of the LH catalytic converter before cleaning and inspecting the manifold. The installation requires six new LH catalytic converter manifold studs which should get tightened to 11 Nm (8 ft. lbs.). Procedure for inserting the new LH catalytic converter manifold gasket starts with putting the studs into position. Then secure the manifold into place while giving the new nuts just finger-tightness. The LH catalytic converter-to-exhaust flexible pipe requires installation of a new gasket followed by the two nuts secured at 40 Nm (30 ft. lbs.). The successful installation of the converter bracket bolts requires correct tightening of the catalytic converter manifold nuts because this prevents exhaust leaks. Install the nuts on the specified sequence and apply torque uniformly in two stages at 20 Nm (15 ft. lbs. each stage). First tighten both the shield bracket bolts to 20 Nm (15 ft. lbs.), then move to tightening the two LH catalytic converter manifold bracket bolts to 20 Nm (15 ft. lbs.). Secure the LH catalytic converter manifold shield with four bolts that should be tightened to 10 Nm (89 inch lbs.). Follow a three-step process for tightening the LH catalytic converter-to-exhaust flexible pipe nuts by beginning with 5 Nm (44 inch lbs.) tension on the passenger side nut before adding 40 Nm (30 ft. lbs.) to the driver side nut and completing with 40 Nm (30 ft. lbs.) on the passenger side nut. The technician must reinstall both the heated oxygen sensor (HO2S) and the catalyst monitor sensor (CMS) after which the oil level indicator and tube can be reinstalled. The last task involves replacing the oil filter by tightening it to 5 Nm (44 inch lbs.) before rotating it 180 degrees further.
Exhaust Manifold
6E5Z-5G232-CA
Q: How to service the catalytic converter on a 3.0L RH All Wheel Drive (AWD) on Ford Fusion?
A:
Start the catalytic converter service of a 3.0L RH All Wheel Drive (AWD) vehicle by first placing it in neutral gear position and hoisting the vehicle. New fasteners and gaskets should be used in combination with flange face cleaning before new gasket installation ensures a proper seal. Begin the service procedure by taking out the exhaust flexible pipe followed by the intermediate shaft. Detaching the heated oxygen sensor and catalyst monitor sensor enables you to remove the roll restrictor bolt for rotating the engine ahead until torque reaches 90 Nm (66 ft. lbs.). Reinstall these components in the reverse order. You can install the heat shield after removing its six bolts while tightening it to 10 Nm (89 inch lbs.) torque. First disconnect the three nuts along with heat shield brackets before reinstallation where the nuts require a torque of 20 Nm (15 ft. lbs.). The three nuts holding the RH catalytic converter need to be taken away after their removal and discarding of the gasket and nuts before you tighten the new nuts to 40 Nm (30 ft. lbs.). Tear out the three RH catalytic converter-to-exhaust manifold studs and when installing new studs apply torque to 25 Nm (18 ft. lbs.). Quest for reverse the procedure by using new gaskets and nuts.