Fusion | 2017-2020 | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Responder Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
F-150 | 2015-2020 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
Other Name: Horn Assembly - Low Pitch; Horn, Left; Horn
Position: Driver Side
Fits the following Ford Models:
Bronco Sport | 2021-2023 | Badlands, Base, Big Bend, First Edition, Heritage Edition, Heritage Limited Edition, Outer Banks | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
Escape | 2020-2022 | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service and repair the horn on Ford Excursion?
A: To service the horn, detach battery tray and horn assembly bolt, right-hand fender apron retainers and screws. Lift the fender apron to remove it and disconnection by lifting the electrical connector. Uninstall: It is possible to reinstall with the reverse procedure.
Q: How to service the anti-theft alarm horn on Ford Mustang?
A: The first step to service the anti-theft alarm horn is to disconnect the battery. Next, unscrew the right rear quarter trim panel and unscrew the electrical connector of the horn. Unscrew the horn and remove it. All that is needed to install the new horn is to reverse everything that was done to remove it.