Expedition | 2022-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Other Name: Cable Assembly - Extension; Antenna Cable, Front
Position: Front
Replaces: JL1Z-18812-BA, JL1Z-18812-MA
Fits the following Ford Models:
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Other Name: Splitter - Navigation Fm Antenna; Radio Wiring Harness
Fits the following Ford Models:
Escape | 2020-2022 | S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service and repair the fixed antenna cable on Ford Explorer?
A: A proper repair of the fixed antenna cable requires technicians to first detach the battery ground cable. The radio antenna mast removal starts by raising the deflector up before turning the mast to the counterclockwise direction. Before moving on you must remove the radio antenna base cap and the nut securing it. First detach the front fender apron by disassembling screws and bolts then disconnect the lower antenna mounting screw. The service starts with removing right-hand side trim panel from the cowl area while also removing the audio system. Access the glove compartment door after which you can open its tabs until the door reaches its lowest position and finally free up the antenna lead-in cable locators until the cable reaches the engine area. The last step requires the removal of the antenna base together with the antenna lead-in cable. To mount the installation reverse the steps from disassembly. You should know that battery removal and replacement can trigger strange drive performance because the vehicle reestablishes its adaptive approach during which you must drive the vehicle at least 16 km (10 mi).
Q: How to service and repair the antenna cable on Ford Ranger?
A: Occupational service starts with removing the antenna from the vehicle. The technician must remove the audio unit as the next step. Open the glove compartment door completely by letting go of its tabs. The rubber grommet from the sheet metal needs to be pulled while extracting the antenna cable through the glove compartment door opening. The installation of the new antenna cable follows the opposite steps of the removal process.
Q: How to service and repair the Antenna Cable on Ford Mustang?
A: The antenna lead-in cable service requires detachment of the audio unit followed by dropping the glove compartment door. Disconnection of the antenna in-line connector must be followed by removing the antenna lead-in cable through pin-type retainer removal. The installation of the new cable should begin by completing the reverse steps of removal.