How to Service and Repair the Front Seat Cover on Ford Ranger?

Service and repair operations for the front seat cushion cover start with removal of both affected seats and their seat backrest units. First remove the trim cover rear J-clip from the seat cushion before disconnecting the seat wiring harness connector from the seat cushion frame while taking note of the wire harness path for reinstallation. Detaching the seat track assembly from the cushion frame requires unbolted bolts from four position on the seat track-to-cushion frame. The Occupant Classification Sensor (OCS) bladder must never be detached from the seat cushion foam pad because incorrect OCS system operation could result. The trim cover can be removed after you uninstall every hog ring from the assembly. Check the seat cushion pad together with the trim cover for any foreign objects before mounting the new trim because foreign materials can trigger OCS system failure. Secure the new cover of the seat cushion on the foam pad with hog rings while fastening both J-clips and the side foam pad retainer strap for the 60 percent seat. Reinstall the seat track by securing it to the cushion frame assembly with bolts that should be tightened to 6 Nm (53 lb-in) and follow by attaching the rear J-clip on the cushion trim cover. The seat wiring harness should be connected to the seat cushion frame after replacing the retainer clip. Installation of the seat requires first the seat backrest followed by the seat proper. Perform the OCS system reset only after verifying that both the front passenger seat repair work is final and all components are in the correct order and the seat mount is securely installed. Before performing the Occupant Classification System Module (OCSM) reset check for 8 to 18 volts of voltage supply and a temperature range between 6°C to 36°C (42°F to 97°F) and verify the passenger seat is empty. The OCS system reset must begin following at least 8 seconds of ignition ON cycling. A second reset attempt needs inspection of OCS system connector wiring and pressure sensor hose together with the seat-related wiring for damage before retrying the reset if the first attempt fails. Failure during the second try requires users to install a new OCS system service kit. The user must end the SRS proving process by turning the ignition key to OFF then waiting 10 seconds before returning it to ON position to check the air bag warning indicator shows proper operation. Use a scan tool to erase all ongoing RCM and OCSM diagnostic trouble codes.

OEM Ford Ranger Seat Cover

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

241 Seat Covers found

View related parts
Ford Ranger Seat Cover, Front Passenger Side Part Number: MB3Z-2162900-DA
$339.51 MSRP: $532.32
You Save: $192.81 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Passenger Side Part Number: HB3Z-2164416-AA
$458.29 MSRP: $672.97
You Save: $214.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Cover, Front Passenger Side Part Number: MB3Z-2162900-DB
$362.51 MSRP: $532.32
You Save: $169.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cushion Cover, Rear Part Number: KB3Z-2663804-AA
$303.15 MSRP: $445.15
You Save: $142.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Cushion; Seat Cushion Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Driver Side Part Number: LB3Z-2164417-CB
$329.62 MSRP: $484.02
You Save: $154.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Ranger | Lariat, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover Part Number: KB3Z-2164417-DC
$571.02 MSRP: $845.95
You Save: $274.93 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Driver Side Part Number: MB3Z-2164417-DB
$574.25 MSRP: $850.73
You Save: $276.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Rear Part Number: MB3Z-2666600-AA
$326.39 MSRP: $479.28
You Save: $152.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cushion Cover, Rear Part Number: MB3Z-2663804-DB
$608.11 MSRP: $900.90
You Save: $292.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Cushion; Seat Cushion Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Passenger Side Part Number: MB3Z-2164416-CA
$316.88 MSRP: $465.32
You Save: $148.44 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Rear Part Number: MB3Z-2666600-DA
$533.76 MSRP: $783.78
You Save: $250.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Passenger Side Part Number: MB3Z-2164416-DB
$546.01 MSRP: $808.90
You Save: $262.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Driver Side Part Number: MB3Z-2164417-CA
$240.68 MSRP: $374.88
You Save: $134.20 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cushion Cover Part Number: LB3Z-2663804-CB
$343.34 MSRP: $504.17
You Save: $160.83 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Rear Seat Cushion
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Passenger Side Part Number: KB3Z-2164416-DC
$557.26 MSRP: $825.57
You Save: $268.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Cover, Front Part Number: KB3Z-2162901-DA
$335.52 MSRP: $492.68
You Save: $157.16 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover Part Number: MB3Z-2164417-DA
$545.93 MSRP: $808.78
You Save: $262.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Cover, Front Driver Side Part Number: MB3Z-2162901-DB
$362.51 MSRP: $532.32
You Save: $169.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Driver Side Part Number: KB3Z-2164417-AA
$320.25 MSRP: $470.27
You Save: $150.02 (32%)
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Seat Back Cover, Front Driver Side Part Number: KB3Z-2164417-DA
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Ranger | Lariat | 4 Cyl 2.3 L GAS

| Page 1 of 13 |Next >

1-20 of 241 Results

Ford Ranger Seat Cover

OEM Seat Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cover with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Ranger Seat Cover Parts and Q&A

Seat Cover, Front Driver Side
5L5Z-1062901-AAB
Q: How to Service and Repair the Front Seat Cover on Ford Ranger?
A:
Service and repair operations for the front seat cushion cover start with removal of both affected seats and their seat backrest units. First remove the trim cover rear J-clip from the seat cushion before disconnecting the seat wiring harness connector from the seat cushion frame while taking note of the wire harness path for reinstallation. Detaching the seat track assembly from the cushion frame requires unbolted bolts from four position on the seat track-to-cushion frame. The Occupant Classification Sensor (OCS) bladder must never be detached from the seat cushion foam pad because incorrect OCS system operation could result. The trim cover can be removed after you uninstall every hog ring from the assembly. Check the seat cushion pad together with the trim cover for any foreign objects before mounting the new trim because foreign materials can trigger OCS system failure. Secure the new cover of the seat cushion on the foam pad with hog rings while fastening both J-clips and the side foam pad retainer strap for the 60 percent seat. Reinstall the seat track by securing it to the cushion frame assembly with bolts that should be tightened to 6 Nm (53 lb-in) and follow by attaching the rear J-clip on the cushion trim cover. The seat wiring harness should be connected to the seat cushion frame after replacing the retainer clip. Installation of the seat requires first the seat backrest followed by the seat proper. Perform the OCS system reset only after verifying that both the front passenger seat repair work is final and all components are in the correct order and the seat mount is securely installed. Before performing the Occupant Classification System Module (OCSM) reset check for 8 to 18 volts of voltage supply and a temperature range between 6°C to 36°C (42°F to 97°F) and verify the passenger seat is empty. The OCS system reset must begin following at least 8 seconds of ignition ON cycling. A second reset attempt needs inspection of OCS system connector wiring and pressure sensor hose together with the seat-related wiring for damage before retrying the reset if the first attempt fails. Failure during the second try requires users to install a new OCS system service kit. The user must end the SRS proving process by turning the ignition key to OFF then waiting 10 seconds before returning it to ON position to check the air bag warning indicator shows proper operation. Use a scan tool to erase all ongoing RCM and OCSM diagnostic trouble codes.