How to Service and Repair the Front Sway Bars on Ford Ranger?

Service and repairs for the front Sway Bars begin by hoisting the vehicle and then removing its wheel assembly. Start by disconnecting the front sway bar link nuts attached to the front suspension lower arms and then remove the front sway bar link bolts as well as the links from the assembly. Extract the front sway bar from the vehicle by unbolting four pieces and detaching two brackets, and afterward eliminating the sway bar insulator. The parts department can provide further information about the flag nut kit, which clients can use for frame installation if self-tapping bolts are ineffective. Perform the reverse order of uninstallation steps to finish the Sway Bars installation.

OEM Ford Ranger Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Sway Bars found

View related parts
Ford Ranger Bar Assembly - Roll Part Number: MB3Z-5482-V
$148.62 MSRP: $216.33
You Save: $67.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR ASY - ROLL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | Lariat, Raptor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Bar - Rear Axle Part Number: MB3Z-5808-B
$124.81 MSRP: $181.67
You Save: $56.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | Lariat, Raptor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Bar Assembly - Roll Part Number: MB3Z-5482-U
$162.48 MSRP: $236.50
You Save: $74.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR ASY - ROLL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | Raptor | 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Stabilizer Bar, Front Part Number: KB3Z-5482-A
$180.11 MSRP: $262.17
You Save: $82.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Linkage Part Number: EB3Z-5K898-A
$310.99 MSRP: $456.67
You Save: $145.68 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Ranger | Lariat, Raptor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Ranger Stabilizer Bar Bracket, Front Part Number: KB3Z-5486-A
$52.43 MSRP: $75.00
You Save: $22.57 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Suspension Stabilizer Bar Bracket, Front; Sway Bar Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-DA
$114.38 MSRP: $158.23
You Save: $43.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Stabilizer, 4x4,
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, STX, Splash, Sport, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-CA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, STX, Splash, Sport, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Stabilizer Bar, Front Part Number: F87Z-5482-BD
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: F87Z-5482-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, SE, Splash, Sport, STX, SX, Tremor, XL, XLT | 2.3L L4, 2.5L L4, 3.0L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 4.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Stabilizer Bar Part Number: E9TZ5A772C
Product Specifications
- Other Name: Bar Assembly - Rear Stabilizer; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1999 Ford Ranger | Custom, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Stabilizer Bar Part Number: E3TZ5B496A
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1992 Ford Ranger | Base, Custom, GT, S, S Plus, STX, Sport, XL, XLS, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L DIESEL, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

Ford Ranger Sway Bars

OEM Sway Bars boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bars with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

By connecting components in the suspension on opposite sides of the truck, Ford Ranger Sway Bars help decrease body roll. When one wheel rises or falls, a torsion spring resists the twisting motion. The bar essentially requires both wheels of the vehicle to travel at nearly the same height. This limits any sideways lean when the vehicle is going around corners. Therefore, much better road grip is ensured and the Ranger remains stable even over road irregularities. Ranger Sway Bars can become physically loose if their bushings or end links are worn. This allows the Sway Bars to move freely, which can produce clunking sounds and negatively affect handling. Visually inspect the rubber for cracks and check for unnecessary play on ball sockets. By adding a rear bar to a Ford pickup that is not supplied with one, roll stiffness is enhanced when a camper or other tall load is placed in the pickup bed. In general, Ford Sway Bars will be selected for a balance of handling and ride comfort, so bushing condition can play a large role in overall feel. Routine maintenance of the Ford should include checking the bar for rust or collision deformation. Also ensure checks if the attachment point has elongation. Intact Sway Bars preserve the factory play between comfort and control, and with functioning Sway Bars a Ford Ranger turns more predictably and the driver drives with more confidence.

Ford Ranger Sway Bars Parts and Q&A

Stabilizer Bar, Front
F87Z-5482-CA
Q: How to Service and Repair the Front Sway Bars on Ford Ranger?
A:
Service and repairs for the front Sway Bars begin by hoisting the vehicle and then removing its wheel assembly. Start by disconnecting the front sway bar link nuts attached to the front suspension lower arms and then remove the front sway bar link bolts as well as the links from the assembly. Extract the front sway bar from the vehicle by unbolting four pieces and detaching two brackets, and afterward eliminating the sway bar insulator. The parts department can provide further information about the flag nut kit, which clients can use for frame installation if self-tapping bolts are ineffective. Perform the reverse order of uninstallation steps to finish the Sway Bars installation.