How to Service and Repair Automatic Transmission Shift Levers on Ford Taurus?

A worker should initiate automatic transmission shifter maintenance by extracting the center console first. The first step requires disconnecting the automatic transmission shift lever cable end from the automatic transmission shift lever before pressing the two tabs to free the automatic transmission shift lever cable from the lever body. Begin service and repair of the automatic transmission shifter by disconnecting its electrical connector and taking out the wire harness retainers from the automatic transmission shift lever. Remove first the left-hand and right-hand plastic retaining clips of carpet after which you can uninstall the four automatic transmission shift lever bolts then reassemble these bolts at 11 Nm (8 lb-ft) torque. Connect the electrical connector and wire harness retainers while attaching the plastic retaining clips of each side and proceed to install the automatic transmission shift lever bolts. After attaching the automatic transmission shift lever cable to the automatic transmission shift lever you should connect its end to the lever and then place the center console back. Last, verify that the automatic transmission shift lever cable functions correctly by confirming Park and Neutral status as well as Reverse lamp illumination. Read and carry out the Automatic Transmission Shift Lever Cable Adjustment method if adjustment proves necessary.

OEM Ford Taurus Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Automatic Transmission Shift Levers found

View related parts
Ford Taurus Shift Knob Part Number: DG1Z-7213-DC
$59.57 MSRP: $86.72
You Save: $27.15 (32%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Replaces: DG1Z-7213-DB, DG1Z-7213-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: GG1Z-7210-EB
$206.00 MSRP: $302.50
You Save: $96.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: DG1Z-7210-DC, DG1Z-7210-DA, DG1Z-7210-DB, GG1Z-7210-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: GG1Z-7210-DB
$212.25 MSRP: $311.67
You Save: $99.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: DG1Z-7210-CA, GG1Z-7210-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: GG1Z-7210-CB
$218.49 MSRP: $320.83
You Save: $102.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: DG1Z-7210-AA, GG1Z-7210-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: GG1Z-7210-BB
$187.67 MSRP: $273.17
You Save: $85.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: DG1Z-7210-EA, DG1Z-7210-EC, GG1Z-7210-BA, DG1Z-7210-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: GG1Z-7210-AB
$187.67 MSRP: $273.17
You Save: $85.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: DG1Z-7210-BB, DG1Z-7210-BC, DG1Z-7210-BA, GG1Z-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Shift Knob Part Number: DG1Z-7213-AC
$90.81 MSRP: $132.18
You Save: $41.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Replaces: DG1Z-7213-AB, DG1Z-7213-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Gear Shift Assembly Part Number: DG1Z-7210-F
$193.96 MSRP: $282.33
You Save: $88.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Selector Shaft Assembly; Automatic Transmission Shift Cover Plate; Shift Lever; Selector Handle; Shift Bowl; Shifter
- Replaces: DG1Z-7210-D, DG1Z-7210-E, DG1Z-7210-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shift Lever Part Number: DG1Z-7A256-B
$106.93 MSRP: $155.65
You Save: $48.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever; Automatic Transmission Shift Lever; Manual Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shift Lever Part Number: DG1Z-7210-B
$92.95 MSRP: $135.30
You Save: $42.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Transmission Gear Shift; Automatic Transmission Manual Control Lever; Automatic Transmission Shift Lever; Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: AG1Z-7210-CF
$476.93 MSRP: $700.33
You Save: $223.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: AG1Z-7210-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: AG1Z-7210-AD
$429.48 MSRP: $630.67
You Save: $201.19 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: AG1Z-7210-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shift Lever Part Number: F8DZ-7210-BD
Product Specifications
- Other Name: Lever - Gear Shift; Manual Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly
- Manufacturer Note: Black - Trim code *J - without OD cancel switch, column shift
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: 9G1Z-7210-CA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: 8G1Z-7210-D, 8G1Z-7210-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Gear Shift Assembly Part Number: 9G1Z-7210-BB
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Selector Handle
- Replaces: 9G1Z-7210-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly Part Number: 9G1Z-7210-AA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: 8G1Z-7210-C, 8G1Z-7210-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shift Housing Part Number: 8G1Z-7210-E
Product Specifications
- Other Name: Housing Assembly - Gear Shift; Automatic Transmission Shift Lever; Shifter; Shift Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Shifter Assembly, Black Part Number: AG1Z-7210-CE
$317.80 MSRP: $466.67
You Save: $148.87 (32%)
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: AG1Z-7210-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS

Ford Taurus Automatic Transmission Shift Levers

OEM Automatic Transmission Shift Levers boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Shift Levers with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Taurus Automatic Transmission Shift Levers Parts and Q&A

Shift Housing
8G1Z-7210-E
Q: How to Service and Repair Automatic Transmission Shift Levers on Ford Taurus?
A:
A worker should initiate Automatic Transmission Shifter maintenance by extracting the center console first. The first step requires disconnecting the automatic transmission shift lever cable end from the automatic transmission shift lever before pressing the two tabs to free the automatic transmission shift lever cable from the lever body. Begin service and repair of the automatic transmission shifter by disconnecting its electrical connector and taking out the wire harness retainers from the automatic transmission shift lever. Remove first the left-hand and right-hand plastic retaining clips of carpet after which you can uninstall the four automatic transmission shift lever bolts then reassemble these bolts at 11 Nm (8 lb-ft) torque. Connect the electrical connector and wire harness retainers while attaching the plastic retaining clips of each side and proceed to install the automatic transmission shift lever bolts. After attaching the automatic transmission shift lever cable to the automatic transmission shift lever you should connect its end to the lever and then place the center console back. Last, verify that the automatic transmission shift lever cable functions correctly by confirming Park and Neutral status as well as Reverse lamp illumination. Read and carry out the Automatic Transmission Shift Lever Cable Adjustment method if adjustment proves necessary.