How to Service and Repair the Brake Disc on Ford Taurus?

The brake service starts with removing the brake caliper anchor plate followed by discarding the brake disc retainers before proceeding. Use Rust Penetrant and Inhibitor F2AZ-19A501-A which fulfills Ford specification ESR-M99C56-A or its equivalent on the hub assembly area that makes contact with the brake disc. A plastic hammer should be used to strike the disc at the wheel bolt location. An equivalent tool to the 2-3 jaw puller 205-DO27 (D80L-1013-A) should be used to extract the brake disc if usual removal methods do not work. Checking the disc for run-out becomes a requirement when removing it requires too much force. The installation process requires application of High Temperature Nickel Anti-Seize Lubricant F6AZ-91LA94-AA or its Ford specification ESE-M12A4-A equivalent on the disc's pilot diameter.

How to remove and replace the front brake disc on Ford Taurus?

The process of removing and replacing the front brake rotor starts with removing the brake caliper anchor plate along with disc brake retainer parts for disposal. Apply silicone brake caliper grease and dielectric compound to the hub assembly contact area on the disc and strike the disk between wheel bolts while using a plastic hammer when the brake disc does not moving freely. You can attempt disc removal using an equivalent brake disc removal tool which matches the specifications of 205-DO27 (D80L-1013-A) unless the methods fail. Excessive force needed to remove the disc requires a measurement of its runout condition. Apply high temperature nickel anti-seize lubricant onto the pilot diameter surface of the new brake disc before following the opposite sequence to reinstall it.

OEM Ford Taurus Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Discs found

View related parts
Ford Taurus Rotor, Front Part Number: YF1Z-1V125-F
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: YF1Z-1V125-G
- Replaces: YF6Z-1V125-EA, 4F1Z-1125-AA, BRR-68, YF1Z-1V125-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007, 1996-1999 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Rotor, Front Part Number: GG1Z-1125-A
$77.34 MSRP: $116.65
You Save: $39.31 (34%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: EU2Z-1V125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rotor, Front Part Number: CB5Z-1125-A
$105.64 MSRP: $159.33
You Save: $53.69 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rotor, Rear Part Number: EU2Z-2V026-B
$80.14 MSRP: $116.65
You Save: $36.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear
- Position: Rear
- Replaces: BRRF-92, BRR-253, DG1Z-2C026-A, EU2Z-2V026-A, G2MZ-2V026-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Drum, Front Part Number: YF1Z-1V125-GA
$36.74 MSRP: $49.99
You Save: $13.25 (27%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1990 Ford Taurus | GL, L, LX, MT5, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Rotor, Rear Part Number: YF1Z-1V125-DB
$30.64 MSRP: $42.39
You Save: $11.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: YF1Z-2C026-BA, YF1Z-1V125-DA, BRR-51, BRRF-57, YF1Z-2C026-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Rotor Part Number: YF1Z-1V125-C
$36.74 MSRP: $49.99
You Save: $13.25 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Replaces: F4OY-1125-A, F4DZ-1125-B, F6DZ-1125-B, F4SZ-1125-A, F3OY-1125-A, BRR-46, F1SZ-1125-A, F4DZ-1125-A, F58Z-1125-BB, YF1Z-1V125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Taurus | G, GL, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Rotor, Rear Part Number: YF1Z-1V125-AA
$5.11 MSRP: $7.07
You Save: $1.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Position: Rear
- Replaces: FODZ-2C026-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1992 Ford Taurus | GL, L, LX, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Rotor Part Number: 5U2Z-1V125-GD
$80.14 MSRP: $116.65
You Save: $36.51 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly
- Replaces: 5U2Z-1V125-GC, 5U2Z-1V125-S, 5F9Z-2C026-BA, BRR-224, BRRF-48, 8G1Z-2C026-A, 8G1Z-2C026-B, BRR-137
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rotor, Front Part Number: 8G1Z-1125-B
$88.39 MSRP: $133.32
You Save: $44.93 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Manufacturer Note: Warranty Eligible
- Position: Front
- Replaces: 8G1Z-1125-A, 5F9Z-1125-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Rotor, Front Part Number: YF1Z-1125-AA
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2000 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Rotor, Front Part Number: YF1Z-1V125-CA
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1993 Ford Taurus | GL, L, LX, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS

Ford Taurus Brake Disc

OEM Brake Disc boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Disc with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Brake Disc in Ford Taurus automobiles is or is part of the disc brake system where the Brake Pads rub against it to reduce the speed or stop the automobile. Located between the axle or hub to the wheel, through brake operation hydraulic pressure pushes the caliper to squeeze the pads until it touches the rotor. Such a design can be useful for heat dissipation particularly to the vented rotors with cooling fins incorporated in their designs. The following years have seen several Taurus models using Brake Discs of certain types; the solid types as well as the vented kinds. Drum brake rotors are standard in cars that are not performance oriented, while vented rotors are fancier, and improve cooling. Discs are very important because they can get warped, scored, or have excessive runout that can hinder braking. Thus, constant check-ups on the surface of the rotors and replacement of these surfaces when they wear out are crucial to achieving and maintaining the optimal braking power and safety.

Ford Taurus Brake Disc Parts and Q&A

Rotor, Rear
YF1Z-1V125-DB
Q: How to Service and Repair the Brake Disc on Ford Taurus?
A:
The brake service starts with removing the brake caliper anchor plate followed by discarding the brake disc retainers before proceeding. Use Rust Penetrant and Inhibitor F2AZ-19A501-A which fulfills Ford specification ESR-M99C56-A or its equivalent on the hub assembly area that makes contact with the brake disc. A plastic hammer should be used to strike the disc at the wheel bolt location. An equivalent tool to the 2-3 jaw puller 205-DO27 (D80L-1013-A) should be used to extract the brake disc if usual removal methods do not work. Checking the disc for run-out becomes a requirement when removing it requires too much force. The installation process requires application of High Temperature Nickel Anti-Seize Lubricant F6AZ-91LA94-AA or its Ford specification ESE-M12A4-A equivalent on the disc's pilot diameter.
Rotor, Front
YF1Z-1V125-F
Q: How to remove and replace the front brake disc on Ford Taurus?
A:
The process of removing and replacing the front brake rotor starts with removing the brake caliper anchor plate along with disc brake retainer parts for disposal. Apply silicone brake caliper grease and dielectric compound to the hub assembly contact area on the disc and strike the disk between wheel bolts while using a plastic hammer when the brake disc does not moving freely. You can attempt disc removal using an equivalent brake disc removal tool which matches the specifications of 205-DO27 (D80L-1013-A) unless the methods fail. Excessive force needed to remove the disc requires a measurement of its runout condition. Apply high temperature nickel anti-seize lubricant onto the pilot diameter surface of the new brake disc before following the opposite sequence to reinstall it.