My Garage
Cart
Make sure this part fits

Ford 7F9Z-5K484-R
Stabilizer Link, Front Passenger Side

2005-2009 Ford 7F9Z5K484R

Customer Questions & Expert Answers (10)
Ford 7F9Z-5K484-R Stabilizer Link, Front Passenger Side
  • Part Description
    Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.
  • Base No.
    5K484
  • Position
    Front Passenger Side
  • Replaces
    5F9Z-5K484-AR
  • Manufacturer
    Ford
Make sure this part fits
$38.77 MSRP: $62.55
You Save: $23.78 (39%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.5K484
    Manufacturer Part Number7F9Z-5K484-R
    Part DescriptionLink; Suspension Stabilizer Bar Link Kit, Front Left/Right.
    Other NamesSuspension Stabilizer Bar Link; Stabilizer Bar Link
    Item Dimensions19.2 x 6.2 x 0.3 inches
    Item Weight1.00 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5F9Z-5K484-AR
    ManufacturerFord
    SKU7F9Z-5K484-R
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Ford Five HundredLimited, SE, SEL6 Cyl 3.0 L GAS
    2005-2007 Ford FreestyleLimited, SE, SEL6 Cyl 3.0 L GAS
    2008-2009 Ford TaurusLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2005-2007 Mercury MontegoLuxury, Premier6 Cyl 3.0 L GAS
    2008-2009 Mercury SableBase, Premier6 Cyl 3.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7F9Z-5K484-R is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7F9Z-5K484-R fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be ensured regarding replaced parts for the 2007 Ford Five Hundred? Posted by Customer
    A:
    Always ensure that any replaced parts are of the same part number and quality to maintain the integrity of the suspension system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done with the stabilizer bar link-to-stabilizer bar nut for the 2005 Ford Five Hundred? Posted by Customer
    A:
    Remove and discard it, and tighten the new nut to 55 Nm (41 ft. lbs.) during installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be used to prevent the stabilizer bar link stud from turning for the 2006 Ford Freestyle? Posted by Customer
    A:
    It is crucial to use the hex holding feature.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be ensured after removing the stabilizer bar link for the 2005 Ford Freestyle? Posted by Customer
    A:
    Always use new suspension fasteners.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done with the lower nut during installation for the 2006 Ford Freestyle? Posted by Customer
    A:
    Discard the lower nut and tighten the new nut to the same torque specification as the upper nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after loosening the upper nut for the 2008 Ford Taurus X? Posted by Customer
    A:
    Use the hex-holding feature to keep the stabilizer bar link ball joints from turning while removing the nut, which should be discarded.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the torque specification for the new upper nut for the 2009 Ford Taurus X? Posted by Customer
    A:
    Tighten it to 55 Nm (41 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done with the upper nut during removal for the 2007 Mercury Montego? Posted by Customer
    A:
    Remove and discard the upper nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the torque specification for tightening the upper nut upon installation for the 2008 Mercury Sable? Posted by Customer
    A:
    Tighten the upper nut to 38 Nm (28 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 7F9Z-5K484-R, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 7F9Z-5K484-R Stabilizer Link, Front Passenger Side. It is sometimes referred to as Ford Sway Bar Link. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 7F9Z5K484R Stabilizer Link, Front Passenger Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery